GE Making Water Drops Bounce

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
Raise your hand if you knew General Electric was developing superhydrophobic surfaces in its Global Research Nanotechnology lab. Anyone? What is superhydrophobic? Let me show you...

Imagine how the anti-corrosion and water proof properties of a superhydrophic surface could be used in water cooling applications or on PC parts themselves. Makes you wonder if the coating would inhibit or help the cooling process, doesn’t it? More videos can be found here.
 
I love how GE can do this cool stuff can can't even make a washer worth a damn! Not only did my first washer break the replacement broken two years later. Gotta love quality.


Justed needed to vent!
 
I bet if you coated the underside of a boat with that stuff you could use a lot less energy.

 
Hydrophobic or even SuperHydrophobic materials wouldn't work that well in a closed loop environment for watercooling only because you are forcing them through an enclosed system. Not only that, I imagine with the enclosed system, they want to be as far away from hydrophobic surface as possible which in terms of an overall system wouldn't be good since you want good liquid to surface contact for absorbing heat and whisking it away. Just my initial thoughts about that.
 
That would be a very good application actually.

Actually, it wouldn't. I used to work for a marina. I've been to the US Marine factory in Cumberland, MD that makes Bayliners and Maxum's to learn gelcoat and fiberglass repair. According to them having a water repelling surface or coating on the hull that contacts the water actually slows you down. You want the water to stick to the hull so your not cutting through surface tension. We were told never to wax a hull below the water line. Straight from the manufacturer themselves.

I couldn't see this being benificial for water cooling. Maybe line the tubing with it, but most the other parts, like the waterblocks, you want the water to be in contact with no surface tension in order to absord heat.
 
Actually, it wouldn't. I used to work for a marina. I've been to the US Marine factory in Cumberland, MD that makes Bayliners and Maxum's to learn gelcoat and fiberglass repair. According to them having a water repelling surface or coating on the hull that contacts the water actually slows you down. You want the water to stick to the hull so your not cutting through surface tension. We were told never to wax a hull below the water line. Straight from the manufacturer themselves.

I couldn't see this being benificial for water cooling. Maybe line the tubing with it, but most the other parts, like the waterblocks, you want the water to be in contact with no surface tension in order to absord heat.

Interesting. That is actually quite counterintuitive isn't it. I'll have to go investigate that. Thanks for the info.
 
I don't think it's a good idea in a watercooling loop. No interaction between water and block surfaces mean there is less heat transfer happening. This is why most people try to add stuff to break surface tension like Water Wetter or even a drop of dishwasher soap in the loop to improve the temps.

 
I would think this would seriously hinder performance in cooling situations since you are breaking the bond between the water and the heated/cooled surfaces.

Isn't the whole purpose of Water Wetter to prevent this situation?
 
Water cooling no. Would it work on cloth for better rain resistant clothing? Also windshields.
 
I love how GE can do this cool stuff can can't even make a washer worth a damn! Not only did my first washer break the replacement broken two years later. Gotta love quality.
Or how GE's CEO is in bed with Iran while they're supplying the terrorists/insurgents that are killing our soldiers and hindering the peace process. =/
 
Great timing, I needed a topic for my nano-self assembly class! You've all brought up a good question, namely how does surface tension effect heat transfer.


........Curtis
 
I wonder if it could be added to simple things like tires. Should improve wet traction, I think.
 
I wonder if it could be added to simple things like tires. Should improve wet traction, I think.
Maybe, maybe not.
1) More likely: Increased surface tension and decreased adhesion means the water will solidify under the tire, you'll hydroplane on every last drop of water.
2) Superhydrophobic means a parting-of-the-red-seas scenario, the tire drops straight to the bottom of the puddle. Great for traction. Sorry, I don't think it'll happen. Hydrophobic means water will try to minimize its contact area with the intruding surface, and the easiest way to do that is to not let it in at all. (Flat surface on top meets minimal tire surface.)

You watch to much Fox new, please think for your self. (I hate CNN, MSNBC, and ABC new as well)
Did you just say "meow"? :p (Sorry, had to- not attacking at all.)
 
Or how GE's CEO is in bed with Iran while they're supplying the terrorists/insurgents that are killing our soldiers and hindering the peace process. =/

Name any other large corp and they have probably done as much, or more business with Iran than GE. I wonder how much food Kraft has sold over there.... feeding the military that kills our soldiers :rolleyes: Or Pepsi/Coke, PG, ...... so on.

You watch to much Fox new, please think for your self. (I hate CNN, MSNBC, and ABC new as well)

 
Name any other large corp and they have probably done as much, or more business with Iran than GE. I wonder how much food Kraft has sold over there.... feeding the military that kills our soldiers :rolleyes: Or Pepsi/Coke, PG, ...... so on.

You watch to much Fox new, please think for your self. (I hate CNN, MSNBC, and ABC new as well)
I'm talking about personally acquired CEO to leading politician $100M+ dealings.. not run of the mill import/exports. But I guess that makes it ok for GE to do such things, because it's just business as usual.

You don't need to watch the "news" to get an idea of what is going on in the world. Just look at the financial reports and insider dealings.

You seem to be ok with companies that do big business with enemies who are killing our men and women in uniform, but I am not ok with it. It doesn't matter how independently cool your are because of what news or blog you watch/read, or which ones you don't. Nobody gives a shit.
 
What about hydrophilic surfaces? Wouldn't they do more to watercooling than hydrophobic ones?
 
What about hydrophilic surfaces? Wouldn't they do more to watercooling than hydrophobic ones?

Yes, but that is a whole different ballgame in terms of chemistry. Repulsion is one thing, absorption or adhesion is another.
 
Back
Top