Need calibration help for NEC 2490

Liight

Weaksauce
Joined
Jul 23, 2008
Messages
72
I do not seem to be get a black level below .55 which is really poor.... Snowdog was getting around .25

My brightness is at 0 and I have calibrated for 120 140 and 160 c/d with no change in black levels.

I have also tried calibrating in dark rooms and working light levels.


Anyone have any tips?
 
What software do you use? I think you could calibrate to even lower brightness.
 
I do not seem to be get a black level below .55 which is really poor.... Snowdog was getting around .25

My brightness is at 0 and I have calibrated for 120 140 and 160 c/d with no change in black levels.

I have also tried calibrating in dark rooms and working light levels.


Anyone have any tips?

That is very strange. .25 is my black at zero brightness after it has been running on high(seems to make the panel brighter for a short time even on low). But if I run on ZERO for a while it actually settles lower than that.

0.22 is my black level in normal usage. I could expect some variation, but not double. That says something is wrong.

As others asked what are you using to calibrate. I have only used Spectraview II, so I can't comment on other packages.

I used the photography profile and set it 2.2 gamma (that may be default) and most important: Manual brightness control. When it gets to the brightness step, I turn the brightness to minimum. After the panel stabilizes I get:

~148 White point and 0.22 black with near 700 contrast.
 
I checked my brightness and every time I calibrate it turns the brightness up to 30ish..?? Any idea how to keep that from happening? that might be part of the problem.

I have also noticed that the black on my monitor seems to be very non-uniform. There are some significant brown spots. I will post a photo this evening.
 
As I said do a calibration with manual brightness control instead of a specified number. It should bring up a slider during calibration where you can adjust brightness, after you turn it down, it won't turn it back up.
 
I checked my brightness and every time I calibrate it turns the brightness up to 30ish..?? Any idea how to keep that from happening? that might be part of the problem.

I have also noticed that the black on my monitor seems to be very non-uniform. There are some significant brown spots. I will post a photo this evening.

What colorimeter do you use?
 
This is my monitor result.

2490vs2475calibrated1hd6.jpg


What's the minimal black at zero brightness in regular menu you measure with SV2 Colorimeter Window after setting everything at default, videocard at default, auto luminance off, Gamma 2.2, at Native mode?
 
I will measure and get back to you tonight. I am not at home atm.

Btw.. Thanks for your help guys. I really appreciate it :)
 
With those settings the black point is .45.




It looks like this baby is going back.... After doing some more testing I turns out the color temp on this screen varies 1500 degrees between certain corners and the center when the area is black....


This is with color comp @ 5. I will post some pictures the show the difference in a min.
I can see it in B/W photos and on this forum.
 
With those settings the black point is .45.

It looks like this baby is going back.... After doing some more testing I turns out the color temp on this screen varies 1500 degrees between certain corners and the center when the area is black....


This is with color comp @ 5. I will post some pictures the show the difference in a min.
I can see it in B/W photos and on this forum.

You don't measure color temp when the screen is black. You measure it when white.

Likewise color comp can't do anything with a dark screen. Color comp only can work on mid tones to bright tones.
 
You don't measure color temp when the screen is black. You measure it when white.

Likewise color comp can't do anything with a dark screen. Color comp only can work on mid tones to bright tones.

That all makes sense, unfortunately black and white pictures look like ass because half of the screen is brownish and the other half is bluish. Here are some examples:

moderate overexposure to show color difference.
l_bc5d2dd6fb0b4922a8fbd8d8bc17c41b.jpg


here is a closer look (at a perceptually realistic exposure)
l_da00ca41212f4b148f6d6f9331ebe0db.jpg


The problem is noticeable in real world usage when doing B/W images or working with anything even kind of dark.

Maybe I am expecting too much? Though for 1250$, I think having blacks that are not brown and blue is not to much to ask? does anyone else have this with their 2490?


On the topic of calibration, I tried using manual brightness to no avail. Still getting black points at above .50. The brightness is staying correct now though.
 
Untitled-1.jpg


The settings indicated in the arrow greatly effects black point. Try fiddle with each single settings indicated in the arrow to get the best black point possible if that's what you are going after.
 
With those settings the black point is .45.




It looks like this baby is going back.... After doing some more testing I turns out the color temp on this screen varies 1500 degrees between certain corners and the center when the area is black....


This is with color comp @ 5. I will post some pictures the show the difference in a min.
I can see it in B/W photos and on this forum.

Yes. This one is a defective unit. Return it.
 
OK. I am going to call NEC on friday to get an advance exchange. How is NEC about replacements...I get the impression they have really good customer service. Is there anything I should stress about the problem to insure they replace it?

You guys are lifesavers btw. I would have been lost without help.
 
Maybe point out, that you want them to repair it, especially if you have no bad pixels and no backlight bleeding. So they don't send you a monitor with better black but worse everything else :)
 
Not a bad idea if they can fix it..... I guess i could live with my laptop screen for a week or two ::cries a little::
 
Another thing is I remember someones NEC ended up behaving like this. Poor contrast, muddy blacks. I think he did a reset all, change to native settings, and it returned to normal. With proper black and contrast, He was then able to calibrate again it was ok.

If you haven't boxed it, I would suggest doing a reset all, followed by setting it to native gamma, native color temp etc in the advanced menu.

After you do this use SV on the measurement screen and measure the black and white points without calibration, just turn brightness down to zero. You should be near .25 for black. If you are still above .4 then a return might be needed.

Worth a shot before the hassle of a return.
 
lol yea color comp at 5 is a bit extreme... I tried it just to see if it would fix the color hues in my blacks.

I will try that Snowdog, Though I am having doubts it will fix the color hues in the blacks, as it looks like a backlight issue.
 
lol yea color comp at 5 is a bit extreme... I tried it just to see if it would fix the color hues in my blacks.

I will try that Snowdog, Though I am having doubts it will fix the color hues in the blacks, as it looks like a backlight issue.

You did it already 10-21-2008, 10:44 PM , didn't you?
 
Yea, I reset everything manually. Figured maybe Snowdog was referring to a reset all button that might be different than manually resetting.
 
OK. Official update:


I just got my replacement in. 0 dead pixels and the least backlight bleed I have seen in an LCD! No strange color casts in blacks.

NEC advanced shipped me my replacement and paid for shipping both ways.


Result:

I am very, very happy with NEC :D

THANKS FOR YOUR HELP EVERYONE.

Note: Jared at monitor outlet where I bought the screen was very helpful. I would still buy from them again.
 
Back
Top