Messed up picture (with screen shot)

syco123

n00b
Joined
Aug 4, 2008
Messages
15
I've just put a HD4850 in my PC it's a Q6600 in P35 mobo and corsair 650W PSU with 2GB corsair RAM.

After a few minutes playing FEAR the image deteriorates to this, (note the black triangles and crosshatching lines). This is not part of the FEAR gameplay! Game settings were auto detected by the game, mostly medium.

Normal PC use is fine.

4850go1.jpg


Ever seen this before or any ideas what's causing this, is the card bad, overheating something else?
 
Anyone any ideas?

Here's my attempts at fixing this so far.

uninstalled all ATI items using ATI uninstall tool.
I downloaded the latest drivers and now have ccc version 8.9
I've set the refresh rate of the monitor to 60htz 1024x768 true color (ccc has the same setting)
I've tried vsync in FEAR on and off.
I've tried FEAR max setting and min settings.
I decreased the settings in the advanced page of the ccc

Only other game I tried was America's army for a short while before installing FEAR and didn't notice anything wrong (with AA) But then AA might not be hammering the cards capabilities as much as FEAR..

Users at Tom Hardware forums >> said I might not be able to play FEAR. I find it hard to believe that I'm the only one having this problem as FEAR is so popular as it the components I'm using. If it was a rig/game issue wouldn't others have this issue too?

Anyone seen this before, or more importantly how can I resolved it?
 
I think that's artifacting. Did you OC? Pushing settings too far can result in artifacting or snowing. That's when you know you've reached OC limits for the card.
 
And to boot- My specs play 1920x1200 all maxed out fine... why would your setup auto detect medium with a 4850
 
And to boot- My specs play 1920x1200 all maxed out fine... why would your setup auto detect medium with a 4850

I agree, its EXTREMELY unsual for it to detect only medium settings with such an old game and high end card. Even my x800pe back in the day would auto-detect high settings. I would say download a copy of ATITool and set up the dynamic fan profile to kick on to about 95% at 55C or so. Also, have it write the temps to a log every ten seconds and when FEAR starts doing it again, exit out and check the temps log to see if the temps are high. I still cant get over the medium auto-detection. I think maybe you just got a bad card.
 
I think the card is bad too, I've had no luck with this build!.

Would anyone know is there a way to save the progress I've made in FEAR, like an appdata file that can be backed up or something?
 
I agree, its EXTREMELY unsual for it to detect only medium settings with such an old game and high end card. Even my x800pe back in the day would auto-detect high settings. I would say download a copy of ATITool and set up the dynamic fan profile to kick on to about 95% at 55C or so. Also, have it write the temps to a log every ten seconds and when FEAR starts doing it again, exit out and check the temps log to see if the temps are high. I still cant get over the medium auto-detection. I think maybe you just got a bad card.

Because the latest patch for FEAR was probably over a year ago. Thus it has no knowledge of the newer cards today, so it sees an unknown video card - puts the settings to medium.
 
48c idle 78c at 98%.

I assume that's 98% load, not the fan setting. Although many cooling fanatics will say that's high, it's well within operating specs, and therefore should not be the cause of your problems. If the card is not OC, then it is likely a defective card that should be returned.
 
Those artifacts are familiar to anyone who has tried to OC and reached the limit. But if your card isn't OC'd, it's defective.
 
Try turning off soft shadows. Had a very similar problem when soft shadows was enabled. With a 4850 you should be able to max out FEAR with out any problem including soft shadows, however, if its enabled you may be having issues with it. Does it happen in any other game?
 
best buy replaced the card and now all is good. I thik it was just bad.

Thanks for all the help!
 
Download and run GPUz, take a screen shot and post it. If your game is detecting medium settings with that rig, then the following is most likely happening: 1) You need to reinstall the latest chip-set drivers, or 2) Try updating your BIOS. I personally worked with a machine that exhibited such behavior before. A BIOS update and new chip-set drivers did the trick. However, if this does not fix the problem then you may need to RMA the card.
 
Best buy? Whats wrong with you?

Tom you clearly didn't see the killer deal Best Buy had on this card. :)

And Proxy you clearly didn't see my previous post. :D I did have to RMA the card. Thanks for you attention to the problem though.

I've not bought over the counter in ages so to hand in one and get given another right away was a nice step back in time.
 
Back
Top