Intel Core i7 Spy Pics

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
The Chinese site Mobile01.com has posted several pictures of a Core i7 Extreme Edition 965 45nm processor and retail heatsink. Check out the pictures below to see the LGA1366 processor pictured next to a LGA 775 processor and an old socket 478 for size reference. I ran into problems viewing the pictures on the original site so I grabbed a couple in case you guys had problems getting them to work too.
 
Hang on, let me get the magnifying glass out so I can see what I'm doing putting the processor in the motherboard.
 
Way sweet! Core i7 looks ready to roll... by the way, just click those links going down the page and the pictures will load, one link for each pic.
 
now only if they change the way the heatsink mounts... putting it in is easy, but if you have to start switch heat sinks, the clips can break and are just a pain in the butt
 
now only if they change the way the heatsink mounts... putting it in is easy, but if you have to start switch heat sinks, the clips can break and are just a pain in the butt
:confused:
Never broken a clip, and very happy with how securely it sits. (Apparently I'm a minority.) However, I hate how much the board warps with those bloody clips.
 
I'm sad to see what ever small amount of time they decided to spend twords upgrading their stock heatsink to the same shitty design, that solid core which pulls the majority of the heat off of the CPU gets little to no fan attention, and while those fins do spread out heat they don't spread out nearly enough ... god I remember back when they expected these things to work on P4's!
 
I'm sad to see what ever small amount of time they decided to spend twords upgrading their stock heatsink to the same shitty design, that solid core which pulls the majority of the heat off of the CPU gets little to no fan attention, and while those fins do spread out heat they don't spread out nearly enough ... god I remember back when they expected these things to work on P4's!

They had to. Prescotts were nuclear reactors.

There's always third party HSF.
 
Gah, I just did a major upgrade back in March but seeing this makes me so ancy to do another build, haha.
 
now only if they change the way the heatsink mounts... putting it in is easy, but if you have to start switch heat sinks, the clips can break and are just a pain in the butt

I have always had a hard time putting the oem heastink on. The little crappy plastic graplers never reach the back of the board so I really have to push on them dangerously hard to get them in there before locking. All these oem things should be screwed on anyhow, would prevent shipping problems, I have seen a few heatsinks fall off thanks to UPS and their crazy ideas of how to handle expensive electronics! Have seen some OEM's that go so far as to put a bunch of packing material all around the inside while shipping to prevent the heatsink from wrecking everything if it falls off.
 
problem with screwed on or bolted on heatsink is Intel and AMD would have a huge batch of returns from people who puts it on much too tight. I don't think that's every going to happen unless you're an enthusiast and invest in blocks and water cooling infrastructures.
 
is the length apart from each pin still the same? the new one looks slightly wider, it would be great if we can reuse our expensive HSF.
 
is the length apart from each pin still the same? the new one looks slightly wider, it would be great if we can reuse our expensive HSF.

No kidding. I'm super happy with my current Zalman HSF (super quiet) and I'd really like to keep it when I upgrade.
 
problem with screwed on or bolted on heatsink is Intel and AMD would have a huge batch of returns from people who puts it on much too tight. I don't think that's every going to happen unless you're an enthusiast and invest in blocks and water cooling infrastructures.
Not really. You have it screw into a metal backplate the has sockets stick out from the mobo by 1mm, then no matter how carried away you get with your 3phase binford electric screw driver you're not going to be able to crush the core or PCB.
 
same sucky heatsink design.. only bigger.. and they again coupled it with a fan setup that will not push the air through the heatsink.... FTL
 
For the love of god, could we get a guard on the fan? I can just imagine losing a fingertip or two while that monstrosity is on the test bench.
 
what are all the gold contact points on the board part of the chip???

i love the half copper heatsink.. but how long until intel cut costs and turn it into a half-height piece of shit???

like have you seen the heatsinks on cpus like the Q9550??? it makes the heatsink that came with my e6700 look like a baby.. the Q9550(2.8GHzX4-45nm) has a copper core with a diameter of about 15mm and is a half height heatsink where the e6700(2.66GHzX2-65nm) has a copper core about 35mm in diameter and full-height...
 
No joke. I'm always afraid a motherboard will snap.

The loud satisfying snapping noise is what you aim for when performing a new build! That's how you know it's really in there good. :D
 
I dunno if I'm the only rtard who just figured this out, but putting the HSF on before you put the case in is 1000x easier as you can stabilize the mobo under each pin (if that makes sense) as you click them in. Otherwise the board flexes too much and its a total PITA.
 
new processor, new mobo, new waterblock....sigh, I wish i had that kind of money..
 
Back
Top