Is anyone else getting 45nm headaches?

kevineugenius

[H]ard|Gawd
Joined
Dec 9, 2006
Messages
1,415
I have two motherboards, evga 650i and Intel DP35DP, and both of them say that they support 45nm 1333mhz FSB CPUs. Well, after BIOS updates (YES I DID THEM... stupid tech support asked me like 9000 times if I updated the BIOS, yes I updated it, more than once even just to be sure it worked) I can get the computer to POST using the 650i but it will not boot, even from a Windows CD. Using the DP35DP, I can boot, installed Windows, etc, but every once in a while (quite frequently) the computer just bogs down and runs insanely slow. I went into the task manager and generally there will be one program using 50% CPU and even if there are no other programs using CPU, it says that CPU usage is 100%. This goes on for like 3 minutes, then it runs normal again. At any rate, I'm extremely disappointed so far; everyone said how super cool these CPUs were going to be, and so far I've basically gotten a downgrade (went from q6600 to e8200, was going to overclock but using the Intel board I basically can't overclock at all) and a bunch of headaches, as well as an unusable motherboard.
 
45nm dual or core? I know for a fact that the 650/680 can not handle a 45nm quad.

edit: nm i see the e8200 now. Why the downgrade?
 
i would wager to bet its something that isnt ur cpu... list specs ftw!
 
Go to http://www.intel.com

Look up the spec sheets for the intel chipset and CPU that you are trying to make work.

The spec sheets will list which chipsets and CPUs are compatible with each other.

That should help.
 
That's why this ticks me off ^^. I went to both Evga's and Intel's sites and looked up these motherboards and the exact CPU I was going to get before I purchased the boards. Both sites say that they should work.

All the parts I have used so far
e8200
e6550
Evga 650i Ultra
Intel DP35DP
4x1gb G.Skill DDR2-800, 4-4-4-12 (running at 5-5-5-15), used only 2 at a time as well
2x1gb Super Talent DDR2-800
BFG 8800gt
HIS HD 3650

The RAM was in my system for over a year, it's good. I stress tested the 8800gt for 12 hours in a different sytem, it had no issues. I tested the motherboard with an e6550 and it works fine that way. I have done every bit of troubleshooting I can think of, the only time something doesn't work is when that e8200 is in the system.

Downgrading because I'm tired of PC game companies taking a crap on me and my $2500 systems not being able to run games in high res with the details on. Sold my high end stuff and picked up these parts for cheaper, will buy Xbox games or something.
 
I am running an E7200 on an Intel DP35DP with no problems since May now.
 
Try another PSU just in case.
Yours may not be able to supply enough current or may have developed a noise fault.
Higher clock speeds are more sensitive to noise so this might be why it is occurring with your new CPU.
 
Well this looks promising. I decided to re-flash the DP35DP BIOS since I had only done it once, and while flashing it said that the current BIOS was from June of 2007... So, either the first time I did it it didn't work or I downloaded the wrong file or their site linked the wrong file... Donno. At any rate, I'll test it out a bit for the next few days, seems like if there was a problem to be fixed, that would probably have been it.
 
Man! Those are some tiny headaches you're having! :D

I only get the man-sized ones every now and then reading some of these threads...:p
 
Still plugging away at 65nm myself. I would make CERTAIN (IE google research) your board supports a newer chip before getting either the board or CPU. That's common sense.
 
Still plugging away at 65nm myself. I would make CERTAIN (IE google research) your board supports a newer chip before getting either the board or CPU. That's common sense.

What do I do if I read something on a Google search that isn't true? Or is only true in some cases? All I can do is look at CPU compatibility lists... if they lie (like EVGA's did, Intel's did finally start working) then there's not much I can do. I don't have the setup that I wanted to have after this ordeal, but at least it's working now.... Not sure I want to do another mobo swap and reinstall Windows again just to get overclocking ability.
 
Back
Top