How can I increase hard drive space on a RAID server?

raksasas

Limp Gawd
2FA
Joined
Dec 14, 2002
Messages
477
Sorry for my ignorance here. This is my situation: Prior to me the Department that I work for purchased a 6TB no name server. The Server came from a company called ASA Computers.
With my calculations the server is going to run out of space in the new 6 months and I was told to increase it's storage size. So with that here is what I have gathered from what I can find.

It is a 16 (0-15) Drive bay server and top four bays are empty. I talked to the ex-employee that got terminated and all he told me was that it's the following: RAID 1 on OS / Database drive RAID 5 with 1 hot spare on storage. This server also runs some software called 3ware 3DM2.

Now my boss knows that a 1TB Drive can be purchase for around $200 or less which he basically told me we'll buy 16 of them and just drop them in to make a 16TB server. Once he said this I told him to let me find out if this can be done.

So who can I increase the hard drive space on this server?
 
We could use more information such as the RAID controller you're using (I'm assuming a AMCC 3Ware card based on the software on the server), the number of ports on the controller, and other general information (such as the drives you're using).

You're probably looking towards something called "Online Capacity Expansion", which most high end controllers support. However, since you're upgrading from smaller disks to 1TB disks on the same array, you won't be able to utilize all the data on the 1TB since each disk in a RAID5 array would be limited to the smallest logical disk in the array.

It might be easier to consider making another secondary server simply to dump the data onto a 16-drive 1TB server from your old server rather than to mess around with OCE, especially with a case with limited space, port expandability and power constraints.
 
It might be easier to consider making another secondary server simply to dump the data onto a 16-drive 1TB server from your old server rather than to mess around with OCE, especially with a case with limited space, port expandability and power constraints.

I like this solution the best. Otherwise its going to be a gigantic PITA to expand that from 6-->16 Tb via OCE.
 
Good luck, you will risk your entire collection of data.

In order to do what you want to do, you need to offload the entire array to a storage repository (second server with 6tb capacity or seperate drives). Then you need to buy and toss in 16 1tb drives.... create the array, and then transfer everyting back to the newley created array.

It's going to be a lot of work and you risk data in the process.



There is another alternative which will be easier...

Buy four 1.5TB hard drives, populate 4 of them into the empty 4 bays, that gives you roughly 4.5tb of space RAID5. Then create an array for those four drives and transfer all your data to it (if you run out of space, use something like a spare hard drive connected directly to the motherboard). Transfer all your data to the new array and spare drive if you overflow.

Remove the old array drives, replace the old drives with new 1.5tb drives (you won't need 16 of them).... once you have done this, do an online capacity expansion from the 4 drive array to consume all the remaining 1.5tb drives... once this has been completed, you can transfer the data from the overflow spare drive into the new large array.

This way not only will you avoid having to second server transfer everything, but you also will have physical room left for when you want to add more 1.5's.
 
Do you have backups of this data? If you dont I would make some before doing something this risky.

Can you purchase the 1.5tb drives yet? I havent seen them anywhere.
 
offload and rebuild. if you are paranoid, offload double (2 drives for each piece of data) and then rebuild with TB or 1.5TB drives. Using 5 1.5TB drives you could get back to your 6TB starting point. Going with 12 1TB drives (including a hot spare) would get you 10TB of space, better than the 6TB you have now.

You really should know more about the hardware you have already though.:/
 
Do you have backups of this data? If you dont I would make some before doing something this risky.

Can you purchase the 1.5tb drives yet? I haven't seen them anywhere.

Yes, a 12TB IBM Tape backup for this 6TB server. This 12TB Tape/6TB server is dedicated to Video storage/database.

I haven't seen any 1.5TB drives for sell, I just checked Newegg.

You really should know more about the hardware you have already though.:/

I couldn't agree more. But this comes down to my ignorance/time.

Ignorance:
I am still new at this server stuff and don't know what questions to ask when buying or to ask the vendor. I also have been wanting to inventory all our servers so I know what we have but I am unsure what I should be putting down. That way when I get asked stuff like the above I have an answer.

Time:
Basically it just finding the time to do it since they also have me running fixing everyday type (help desk) issues. I have been meaning to Google around for a sheet that would make a the inventorying of the server easier,have the type of questions I should be asking when buying a server, the type of questions for spec-ing out a server, questions to ask the vendor when a server is needed.
 
I vote for finding a proper system administrator and paying him $100+/hr to do this. If you screw this up at the very least you'll be in deep doodoo, at worst you'll lose data/productivity time/your job.

I'm basically your conterpart at my company, and I rely on our sys admin to come and do the heavy lifting - and have the liability. If he screws something up then I don't lose my job. Our guy is really good (and conservative) and everything has run smoothly in the 5 years we've used him. He charges $125/hr base rate, or about $100/hr since we bought a large chunk of his time prepaid.

I do easy stuff like add/change user accounts and check that the backups are working right, but anything else - even stuff I know I could handle - I don't touch for liabilty's sake.
 
I think (not sure though) Ockie meant when they come out. The OP said it would be out of space within the next 6 months. 1.5TBs should be out later this month, with plenty of time to get this going before it is officially out of space...
 
I think (not sure though) Ockie meant when they come out. The OP said it would be out of space within the next 6 months. 1.5TBs should be out later this month, with plenty of time to get this going before it is officially out of space...

They are out. Some stores are just very limited and it's sparse. But everyone has them recorded on inventory, so I'd expect to see them anyday for all stores.
 
[LYL]Homer;1032888416 said:
I vote for finding a proper system administrator and paying him $100+/hr to do this. If you screw this up at the very least you'll be in deep doodoo, at worst you'll lose data/productivity time/your job.

I'm basically your conterpart at my company, and I rely on our sys admin to come and do the heavy lifting - and have the liability. If he screws something up then I don't lose my job. Our guy is really good (and conservative) and everything has run smoothly in the 5 years we've used him. He charges $125/hr base rate, or about $100/hr since we bought a large chunk of his time prepaid.

I do easy stuff like add/change user accounts and check that the backups are working right, but anything else - even stuff I know I could handle - I don't touch for liabilty's sake.

I love the Idea of this but... Let me give you an example of when I gave them this type of answer. "That's what we hired you for." I suggested this when they said figure out what is wrong with the wireless system. I recommend to them that they hire a someone to do a wireless site survey and got the above answer. Then something clicked and the problem went away and i got a adaboy for getting it to work. I told them I didn't do anything. The issue still come around though. So *shrug*

They got it in their heads that there is an IT GOD out there that is a "Guru" in everything and with that in mind they don't need to send him to any schools... or Okay, give me a good reason and the answers I give them don't seem to cut it in their eyes. I'll just say what they told me... Your a jack of all trades, master of none, but in time you will be proficient at many. GRRRR..
 
First thing, if they are moving any kind of secure data over a wireless network, tell them they need to stop and switch to a wired network. I know banks and business of the likes are not allowed to use wireless due to FTC or FCA rules.

Can you get any model numbers or anything off of the physical server?

One day, put down your blackberry or cell phone and fall off the radar and try and tackle this problem, or at least gather enough information to fully understand this problem The little annoyances of the office are meager compared to running out of sever storage space or loosing all of your data on your server. This, as has been expressed, is not something to be taken lightly, and if you are in over you head, ask for help, call in a consultant on the matter.

What kind of budget are you working with?
 
There really isn't a budget per say. It's more of I need this/I think we need to do this and they go - How much is it going to cost? Depending on the cost they either: 1. that cheap, it can be taken out of this/that account. 2. Bring it back up at the end of the physical year we may have the money then. 3. Budget for it next year and hope/pray it does not get cut.

Oh yeah, and then there is the Urgent need category.
 
Are you certain that you really *need* more space? An easy way to recover space is to remove duplicate data and data that doesn't belong on company storage. Also perhaps you could roll some of it off to tape for long-term archival?
 
I am assuming that there is some kind of file system (FS) on that Array. In general most RAID expansion features will expand the array capacity, but not the FS as FS is the responsibility of the OS.
 
They are out. Some stores are just very limited and it's sparse. But everyone has them recorded on inventory, so I'd expect to see them anyday for all stores.

Sweeeeet...Cant wait til the 1TBs prices start dropping like flies....
 
Sweeeeet...Cant wait til the 1TBs prices start dropping like flies....

Don't get your hopes up, the current price of $149 is going to hang around for a while. If you follow the trends of the past large drive generations, it's followed the same pricing path. I expect to see 1t's end up for about $119 on sale, maybe $99-109 for those insane annual type frys sales, but thats about it until the 2tb's comes out. It will follow the 750 trajectory fairly closley.
 
Don't get your hopes up, the current price of $149 is going to hang around for a while. If you follow the trends of the past large drive generations, it's followed the same pricing path. I expect to see 1t's end up for about $119 on sale, maybe $99-109 for those insane annual type frys sales, but thats about it until the 2tb's comes out. It will follow the 750 trajectory fairly closley.

How much do the 1.5s cost? Just curious...
 
Back
Top