NEC 30WQXi Review

Another review done right. Thanks.

One thing I remember reading somewhere that the you could calibrate the sRGB setting if you used the internal calibration (direct connect ) option. That is the only question I can think to add.

A 2490 question though. Did you review it to this level. I would especially like to see the brightness/black level at various settings.
 
Another review done right. Thanks.

One thing I remember reading somewhere that the you could calibrate the sRGB setting if you used the internal calibration (direct connect ) option. That is the only question I can think to add.

A 2490 question though. Did you review it to this level. I would especially like to see the brightness/black level at various settings.

One thing I remember reading somewhere that the you could calibrate the sRGB setting if you used the internal calibration (direct connect ) option.
You are a super-attentive reader.
It does offer this option. Unfortunately I did not save the result - you have noticed that immediately.
I can recall that in terms of dE94 the progress was minimal. Still a mild alternative to WG oversaturation for everyday use but not accurate enough for quality photos. Variations of further software calibration may or may not help - the future permanent users having more time will try to get the answers.

A 2490 question though. Did you review it to this level. I would especially like to see the brightness/black level at various settings
I did it 1 year ago but not translated. It was too big with other 24" involved. I will try to shorten it and translate little later. One year ago I did not expect the future glory this monitor would have.
 
Excellent review. The most detailed and informative monitor review I have seen in a long time. NEC should give you a free monitor for going into so much trouble. ;)

After reading your results, I decided to get a 2490 instead of the 3090.

Thanks
 
Thanks alot for that interesting review.

I'm thinking about contrast and color at low brightness. If I'd like to calibrate the monitor at 90cd/m² or even lower, the review shows decreasing contrast due to a certain minimum black luminance starting at around overall brightness of 240 cd/m².

From what I read so far a S-PVA panel is supposed to show "darker" black. That should lead to higher contrast at low brightness levels. So I wonder if a S-PVA (i.e. the dismissed eizo 30'') might be better for low brightnes purposes due to it's supposed darker black? Or do you think, the IPS-Panel still succeeds? Would appreciate any explanation.
 
The only thing keeping me for buying this was the mini review where the person had stripes on a blue background from uneven backlighting and then got it replaced from NEC twice only to have the same problem over and over....
 
Thanks alot for that interesting review.

I'm thinking about contrast and color at low brightness. If I'd like to calibrate the monitor at 90cd/m² or even lower, the review shows decreasing contrast due to a certain minimum black luminance starting at around overall brightness of 240 cd/m².

From what I read so far a S-PVA panel is supposed to show "darker" black. That should lead to higher contrast at low brightness levels. So I wonder if a S-PVA (i.e. the dismissed eizo 30'') might be better for low brightnes purposes due to it's supposed darker black? Or do you think, the IPS-Panel still succeeds? Would appreciate any explanation.

I'd like to calibrate the monitor at 90cd/m² or even lower
It seems to me that it's too low.
Do you have a particular reason for that?
I used to know that 100 cd/m2 is normal for CRT, 120-130cd/m2 - for LCD.

From what I read so far a S-PVA panel is supposed to show "darker" black. That should lead to higher contrast at low brightness levels.
Usually yes - according to what a colorimeter or another appropriate device measures. Visual effect is different from what the colorimeter says due to color shifting on PVA.
It can be illustrated:
#1
#2 - schematic picture.
So-called "calibration" of PVA (actually gamma twisting) may lead to Zone2 (realistic) moving closer to the center, replacing Zone1 (black crush). But in this case Zone3 (washout) will follow Zone2 and take more space of the picture. From common practice and tests, to survive washout partially and to be comparable with IPS, PVA has to have contrast ratio about 1.5 - 2 times as high as IPS CR.


So I wonder if a S-PVA (i.e. the dismissed eizo 30'') might be better for low brightnes purposes due to it's supposed darker black?

Unfortunately I did not have an opportunity to compare the NEC 3090 and let's say Eizo SX3031W.
Prad.de says Eizo has max CR just below 800:1 and calibrated CR 600+:1
This is equal to the NEC 2490.
From my oservation of 3090 and 2490 together, I cannot say that 3090 yields anything in image quality in generak (except WG details and specific quality of 2490 to retain solid black at angle view).
Darker black will be noticable on pure black areas like black bars above and below a movie scene - if you turn room light off.
Other than that 3031 does not seem to have a visible advantage in CR, given the fact that it suffers from colorshift.
 
It seems to me that it's too low.
Do you have a particular reason for that?

It's because of low ambient light at home at evening hours. Then I do only have 2 or 3 small light bulbs of about 60Watt each.
 
Back
Top