Problem after installing 9800gtx, whats going on?

2wiced

2[H]4U
Joined
Feb 14, 2005
Messages
3,366
After installing a 9800gtx into my computer, sometimes when i push the power button the system comes on, but my monitor gets no signal....

would this be a powersupply issue? I ordered a new heatsink for the video card. Its gonna suck if i have to buy a new PSU.

my system is below

Cpu: e4400 @ 3.3ghz
Motherboard: Gigabyte 775 Ds3l - cant remember full name.
Memory: 4gb ddr 800
Videocard: 9800GTX
Powersupply: Antec 480w truepower II, with 18A on 2 12v rails
2 hard drives
1 dvdrw


When i had a 880GTS 512mb installed nothign like that happened.

any ideas?
 
you might be pushing that 480, but then again it might be some other issue.
 
Its probably your psu failing. Are you able to put your GTS back in to see if it still does it.
 
Its probably your psu failing. Are you able to put your GTS back in to see if it still does it.


Im not, i stepped up the 8800gts 512mb, so i dont have it anywhere. My friend is getting 9600gt so i could use that probably soon.
 
Try booting the card without the pcie power connectors hooked to it. It wont boot, but if the watchdog circuit is good you should get a long solid squeal of a beep. That wont rule out that it is a bad card, but it will definitely lower the chances of it.
 
I will try that when i get home tonight, UPS cant find my friends package of a 9600gt and water coolant. Delivered and signed by their employee on thursday, and they dont know where it is. Luckily I work at a bank and their owner banks with us. If they cant find it, time for some serious explanation.
 
Back
Top