AS5 got on pins when cleaning off

tgabe213

2[H]4U
Joined
Aug 27, 2007
Messages
3,684
Is it bad? It's near impossible to get all of that out of there from inbetween the pins. I assume* they make it so it doesn't conduct electricity.

Anyone?
 
Better throw 'er in the dishwasher.

Oh, and MX-2 is a better compound AND it isn't electrically conductive. :)
 
um, yea its bad. happened to me once, I got just a tiny bit near one of the edges and it took me damn near a week to figure why the hell my computer wouldn't post. take some 99% isopropanol and q-tips or toothpicks or something and clean it all up. Unless you were really lucky with where it ended up, I doubt it will post as it stands right now
 
Is it bad? It's near impossible to get all of that out of there from inbetween the pins. I assume* they make it so it doesn't conduct electricity.

Anyone?

the ceramic stuff doesn't...the silver does to a degree. Get it all off.
 
Thanks for the replies. It came out of an old pc we don't use. It's an old p4, 1.6/256/400 :p
 
Use some contact cleaner, they type ment to be used on electrical components. Just spray it on there and it will melt right off.
 
On the backside of the cpu. NOT in the socket on the board. Turn the cpu upside down, with the pins sticking up. Just a little bit inbetween 4-5 of them on the outside row.
 
Back
Top