x3320 237$ + shipping

why? oh why?! did i have to buy that q6600 at frys today?! whyyy!!!?!!!!?
 
I'm seeing 227 + shipping...

this is just a Xeon q9300 right? which is like $280 @ newegg... so $227 is pretty good price drop :)
 
Someone wanna custom-up my title back to n00b?

C'est la vie.
 
why? oh why?! did i have to buy that q6600 at frys today?! whyyy!!!?!!!!?

Assuming it was at a B&M, just return it. Fry's has a good return policy.

If not, well it's not like that Q6600 is a Dog ;)
 
why? oh why?! did i have to buy that q6600 at frys today?! whyyy!!!?!!!!?

They have a 14 day return policy and no restocking fee so just order the new one and return the q6600. But are you really going to see 50 bucks more performance?
 
actually if u consider the 8% average performance increase + 37% less power required , what do u get . 45% increase over q6600 . i think it is justified .

http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=3272&p=5

X3320 ( Q9300 ) is limited to a x7.5 mutliplier which requires a high FSB (480+) $200+ motherboard to get the same overclock as a Q6600

since few motherboards do over 500 fsb

$$$/MHz it's not worth it compared to a Q6600
 
actually if u consider the 8% average performance increase + 37% less power required , what do u get . 45% increase over q6600 . i think it is justified .

http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=3272&p=5

unless your current board can do 480MHz FSB it's not worth it
X3320 ( Q9300 ) is limited to a x7.5 mutliplier which requires a high FSB (480+) $200+ motherboard to get the same overclock as a Q6600


motherboards that overclock over 500 fsb are rare an expensive
X3320 requires around 500 fsb to reach the clock of a Q6600
X3320 instead of Q6600 is more expensive
 
unless your current board can do 480MHz FSB it's not worth it
X3320 ( Q9300 ) is limited to a x7.5 mutliplier which requires a high FSB (480+) $200+ motherboard to get the same overclock as a Q6600


motherboards that overclock over 500 fsb are rare an expensive
X3320 requires around 500 fsb to reach the clock of a Q6600
X3320 instead of Q6600 is more expensive

what if u dont want to overclock and even if u overclock q9300 requires less energy and runs cooler . and it doesn't need to equal q6600 clock speeds to give the same performance . it can do so at lower clocks .
 
what if u dont want to overclock and even if u overclock q9300 requires less energy and runs cooler . and it doesn't need to equal q6600 clock speeds to give the same performance . it can do so at lower clocks .

The man speaks the truth.

From what I remember, the Q6600 is actually a pretty primitive design. It is just two dual-core CPUs stuck together, essentially. I am not sure if that is the case with the new ones, either.
 
Nothing has changed. Just a newer process and a bit more cache. Id stick with a Q6600. Only Q9450+ are better.
 
They have a 14 day return policy and no restocking fee so just order the new one and return the q6600. But are you really going to see 50 bucks more performance?

hehe. i opened mine up. ;p i think i'll get hit with the 15%...

unless your current board can do 480MHz FSB it's not worth it
X3320 ( Q9300 ) is limited to a x7.5 mutliplier which requires a high FSB (480+) $200+ motherboard to get the same overclock as a Q6600


motherboards that overclock over 500 fsb are rare an expensive
X3320 requires around 500 fsb to reach the clock of a Q6600
X3320 instead of Q6600 is more expensive

my board can do 480 :D 520 is unstable, but i'll give it a shot. my q6600 requires a lot of juice, and it's just using a geminII so not the best temps. got 3.8 runnin at 80+ and had to back off.
there are lots of boards (intel) that can do 500+ now. the 35, 38, and 48 series stuff does real well, and most are under $150, some under $100.
yes th 7.5x mult, sux. i like the whole cooler, less power thing though. especially because i use matx.
yah, $50 more is a real big drawback especially for less mult.

what if u dont want to overclock and even if u overclock q9300 requires less energy and runs cooler . and it doesn't need to equal q6600 clock speeds to give the same performance . it can do so at lower clocks .

true also. which is why it's so hard to choose between these two. i don't keep stuff for long anyhow so i will probably check it out when prices go down more. hopefully the q6600's don't drop too low.
 
Nothing has changed. Just a newer process and a bit more cache. Id stick with a Q6600. Only Q9450+ are better.
Have a Q9450 on the way, to replace my X3210, if the BadAxe2'll run it. :D

If not, it's sold for profit and I wait for Nehalem.
 
WHY did they make it with such a low multiplier? If it was higher, I'd jump on this and sell my E3110 in a hot minute.
 
what if u dont want to overclock and even if u overclock q9300 requires less energy and runs cooler . and it doesn't need to equal q6600 clock speeds to give the same performance . it can do so at lower clocks .

in personal home use, not overclocking your hardware is a waste of money
it's like getting a porsche to do grocerie shopping

clockwise, X3320 = Q6600 + ~150MHz
it's relative to your current hardware

PS to hippies:
the energy-saving factor is a joke.
You'd save more energy if you take shits in darkness than getting a more power-efficient processor.
 
PS to hippies:
the energy-saving factor is a joke.
You'd save more energy if you take shits in darkness than getting a more power-efficient processor.

When did the desire for efficiency equate to being a hippie? Hippies got a bad name, because they often didn't bathe, didn't work, expected everything for free and so on, not because they thought saving energy was a good idea.

I have no idea what type of lighting you have in your bathroom, but if you run your computer all day (as many of us do), the difference is likely more than the 5 or 10 minutes you spend taking a crap in the middle of the night (3 - 7 KWH/year)

According to Xbit, if you OC, the q6600 uses roughly 40 watts more(at idle) than the 9300. To me, that's a pretty significant difference. At current energy prices, that's roughly a 40-50 dollars in savings over one year. At full use, the power difference increases to 70W.

If you don't OC, it really depends on whether your system is sitting largely idle or not. The difference is only around 10W at idle, but goes up to 30 or 40W at full use. With that said, I still fail to see how saving energy, is a bad thing.

Either way, you'd save more from the new processor running 24x7 in less than a month.

Finally, IME, most people with sports cars aren't driving them at 150mph down the freeway. (I'm sure if they could fit all the groceries in the Porsche they would -- come on you got that sweet ride, you gotta show it off ;) ) As such, one could argue sports cards are always a waste of money and given that most of the time our computer is idle, one could argue that it's generally a waste to over clock.

I don't think we do any of these things for practical reasons. Computers have become the geeks version of a car hobby. People trick out their computer with all kinds of bling and/or expensive gear to get the most from a CPU even though in many cases it'd be cheaper to just buy a faster processor. 10 years ago, we overclocked to save money. However, it's no longer the same as the Celeron 300a, where we could buy a BH-6 for under 100 bucks, plop in the Celeron, buy some pc-100 memory and get an instant 50% OC. That was a value proposition.

Now people are buying 200-300 dollar motherboards, spending 2x more for ram to get that extra bit of performance and buying expensive cooling solutions for the CPU and chipset....and so on. And for what? Most of us aren't running our CPUs at full. Nope, we do benchmarks to show that we got our CPU to X GHz. It may add a few FPS to a game, but most games aren't CPU limited. It will increase encoding/compression and so on, but most of us aren't doing that stuff on a regular basis.

There's nothing wrong with overclocking. but let's not pretend that it provides good value for the money. Likewise, if spending extra money on a CPU to save 30 bucks a year on power is what someone chooses to do, then so be it.

We don't always have to be practical....and if one saves a bit on some energy or feels good about using less and sending a bit less money to the Middle East, Russia or Hugo Chavez, then so be it. Buy a Porsche if it makes you feel good (and you can afford it). Most people won't hold it against you, much less call you a commie loving terrorist supporting anti-american <insert your favorite expletive>. (*)

(*) the same can't be said if you're the only person in an SUV that's guzzling gas, doesn't look cool, isn't really fun to drive and most importantly, moving slowly in the left lane and blocking my fucking view of the empty road ahead ;)....I'm not angry, I've just driven on Texas highways.
 
Can't wait for my Q9450 to arrive....

In other news, I love my OCed Quad Core, and my 14mpg getting V8 diesel crewcab.
 
Back
Top