Sad Panda - GeForce 7900GT Dying

Dalrain

Limp Gawd
Joined
Mar 6, 2003
Messages
311
Hi all,
I have a PNY Geforce 7900GT at home that has been slowly going nuts recently. Apparently the warranty is more dead than the card, so I don't have that option, unfortunately.

I'm wondering if there is a diagnostic software for nvidia cards other than ntune? Running the video card stress test that comes with ntune results in "success", but I get lots of weird black lines shooting off of rendered characters. (The effect is especially pronounced in Team Fortress 2.) I've heard elsewhere that the super long black texture triangles/random walls and things are indicative of the card failing, but I'm wondering what other possibilities there are that would have caused this recent issue.

I tried blowing the dust off the card, but it doesn't seem to help for long. (The first 20 seconds or so after boot seem to be ok?)

When this type of death is happening, is it something repairable, or is it really just screwed up forever? If the latter, I am truly a sad panda. :(

Thanks in advance for any tips or explanations of what's probably going on. ;)
 
Could be either the RAM built into the card or the GPU itself is dying, time for a new one.
 
well i had some similar issues with one of my 7900 GTO's but that was just a bad card. got it RMA'd.

as for you....what temps are you seeing? have you cleaned all the dust out of there? lets rule heat problems out first;) any overclocking? sadly, try underclocking it a bit.
 
Hi all,
Thanks for the quick responses. I'll get the temperature reading ASAP after work, but I definitely got the dust out, and the card is already underclocked slightly.

What's a normal temp for a 7900GT stock?

Thanks! :)
 
What brand is your 7900GT? Model number?

The initial run of 7900GT cards suffered from a plague of failures due to defective BGA memory modules from Samsung. If your card was unlucky enough to have the bad modules on it you could see premature failure. The faster the clock speeds of the card, the sooner it would fail. So while people that bought a 'pre-overclocked' version of the 7900GT saw failures happening within weeks up to a few months, people that bought cards that ran at reference speeds typically wouldn't see signs of failure for months or longer. And if you rarely game that might stave off signs of failure for even longer.

Most cards typically come with at least a three year warranty.... which board partner branded your card?
 
306panda.gif
 
What brand is your 7900GT? Model number?

The initial run of 7900GT cards suffered from a plague of failures due to defective BGA memory modules from Samsung. If your card was unlucky enough to have the bad modules on it you could see premature failure. The faster the clock speeds of the card, the sooner it would fail. So while people that bought a 'pre-overclocked' version of the 7900GT saw failures happening within weeks up to a few months, people that bought cards that ran at reference speeds typically wouldn't see signs of failure for months or longer. And if you rarely game that might stave off signs of failure for even longer.

Most cards typically come with at least a three year warranty.... which board partner branded your card?

He mentions PNY in the very first sentance ;)
 
You can use ati tool to see artifacting(SP). EVGA just sent me a 7950gtx2 For my 7900gt. I had it for 20 months before i saw problem's. But I rarely play game's and the one game i do playt Planetside isnt very demanding. But I saw color dot's on 2d graphic's. and line shooting outta ppl in game's (crysis,mtw2).
 
was shipped today at 11 am. maybe it was cause i know one of the Tech guy's(he play's a game with me)
 
Wow! What a response!

I got the temp last night while running the Second life Windlight viewer, which should have put it under a reasonable amount of load. nTune reported 69 degrees Celsius peak, and it didn't seem to go any higher than that. However, that does seem plenty warm, so maybe I can figure something else out to cool the card and see if it helps.

Regarding the full make, it's a PNY Verto Geforce 7900 GT, no special overclocking or the like. I was kind of stupid and forgot to register the card, thinking I would always do it "tomorrow". What that means is that I get porked by PNY and only get the 1 year warranty, which is already up. (You have to register within year one to get the +2 years.)
 
sounds to me like flaky ram, if you want to try and salvage it, i would say yank the card from the system, yank the HSF, and give it a good cleaning. i would use a soft bristel tooth brush ( a new one.. they are only 2 or 3 $... old ones might have been used with stuff that wouldnt be so good on a PCB... ) scrub both the front and back on the card around the ram and inbetween the ram and the GPU. little bits of dust can sometimes have metallic content and make stuff short out (and befor someone says that a nylon toothbrush may generate a static charge.. to you i say pffft... the card is dyeing any way, with out a way of getting it fixed, and chances of it doing damage are so slim its not even funny, and if it dose.. he needed a new one any way...)

get yourself some new thermal paste on there and have a go at it..



for the record, i just did this on my ati card not more than a mounth ago.. i assumed the card was dieing as well... would randomly artifact/crash... the drivers would not stablize even with a 200 core and ram underclock.. tore it down, cleaned it.. and its like new... hell, it will even withstand the max overdrive settings in CCC now (sometihng it didnt do when it was brand new do to a bad contact patch with the ram. (allthought deep down, i was hopeing for a new card.. but its money i dont really have right now.. )
 
Wow! What a response!

I got the temp last night while running the Second life Windlight viewer, which should have put it under a reasonable amount of load. nTune reported 69 degrees Celsius peak, and it didn't seem to go any higher than that. However, that does seem plenty warm, so maybe I can figure something else out to cool the card and see if it helps.

Regarding the full make, it's a PNY Verto Geforce 7900 GT, no special overclocking or the like. I was kind of stupid and forgot to register the card, thinking I would always do it "tomorrow". What that means is that I get porked by PNY and only get the 1 year warranty, which is already up. (You have to register within year one to get the +2 years.)

69C isnt really hot at all for the 7900GT. Mine would hit 60 load and I still had problem's. It just the card is bad.
 
Thanks for the info, all. And thanks for the pic, burnin8r. I was wondering if someone would post it.

I guess I might try the teardown, since that seems reasonable at this time. If the machine is allowed to completely cool, it will function normally for at least a short period of time. I have to wonder if the metal expansion isn't shorting something out with some dust or whatnot.

I appreciate all the suggestions, and I'd be happy to donate my broken card for a better working one, if you all want a broken one so badly. :D
 
I would clock the card down below stock settings, and see what happens. I've gotten the impression that no amount of cooling can save a 7900-series card that's artifacting, but underclocking the card often works.

You, of course, can do the teardown, but I'd try lowering the clocks first. And don't be stingy, I'd lower the clocks 100-200 MHz just to start, and if that works fine, work your way up from there.
 
I underclocked it 300Mhz, and it had no effect. I'm going to try and affect repairs via the full cleansing method now. If that doesn't work, I'll just live with it until next month when all the new cards drive prices down once more. :D

Thanks again for the warm reception this side of the forum, all. :)
 
Back
Top