.....my hard drive caught fire

It was already plugged into the PSU when I booted. I just plugged it into the mobo while I was in Windows.

Don't do that.

SATA is not a hot pluggable technology.

PS/2, IDE, and power connections are also not hot pluggable.

Don't install or remove PCI cards or video cards with the PC powered on.

Don't pour Kool-Aid on powered up parts or hit them with a hammer.

You should not be plugging or unplugging anything on the computer while it is powered up except for standard USB devices. USB is designed to be hot pluggable.
 
Don't do that.

SATA is not a hot pluggable technology.

PS/2, IDE, and power connections are also not hot pluggable.

Don't install or remove PCI cards or video cards with the PC powered on.

Don't pour Kool-Aid on powered up parts or hit them with a hammer.

You should not be plugging or unplugging anything on the computer while it is powered up except for standard USB devices. USB is designed to be hot pluggable.

You might wanna re-read your SATA specs because it is a hot swappable interface.

There actually is a hot swappable PCI slot too it's not very common though.
 
I've had to plug in IDE harddrives during OS installs on an old gateway I have, it never caused any harm.
 
Don't do that.

SATA is not a hot pluggable technology.

PS/2, IDE, and power connections are also not hot pluggable.

Don't install or remove PCI cards or video cards with the PC powered on.

Don't pour Kool-Aid on powered up parts or hit them with a hammer.

You should not be plugging or unplugging anything on the computer while it is powered up except for standard USB devices. USB is designed to be hot pluggable.

SATA is hot pluggable as long as the non molex power port is used.
Last week, I had to hot plug an old SATA drive into a new system to copy the data off because while it would detect on boot it wouldnt appear in Vista.
Hot plugging it while in Vista made the drive appear and I got the data copied over.
 
Ever heard of hot swapping cpu's?

There's an *experimental* option in a compilable bios for certain types of linux. Never seen it done though.
 
SATA is hot pluggable as long as the non molex power port is used.

As long as the manufacturer of the drive and the mobo/controller fully support hot plugging, then that is correct. So my statement that "SATA technology is not a hot pluggable technology" is not %100 correct.

However, what you will often find is that for a given technology spec in a product, the spec is not implemented to it's full capability. IOW, although SATA can be hot pluggable, that does not guarantee that the SATA implementation in your equipment is hot pluggable.

The new "eSATA" makes a big deal about being hot pluggable. That makes sense since it's meant for external drives.

There have been hot swap SCSI server drives and controllers for years too, but by far, not all SCSI drives and controllers are hot swappable.

It's certainly not a feature that you should assume is present.
 
Back
Top