eVGA 8800GTX inconsistent no video

capreppy

[H]ard|DCer of the Month - April 2009
Joined
Jul 4, 2007
Messages
3,410
I've got an eVGA 8800GTX

I've OC'd to 630/1050. Stable and temps are fine.

When starting up my rig, occassionally (and with no consistency) the video card fan comes on (indicating to me at least that it is on), but I get no video. I have to shut down and then give it a minute and then restart. It seems to restart fine (most of the times).

I don't think it's a PSU issue. Where should be I looking for the culprit? Is it the OC?
 
Why dont you think its PSU related?
It sounds like a possible PSU problem.

Overclocking draws more current so while it might not be causing the problem, it will be adding to it - if it is a PSU problem.
 
Why dont you think its PSU related?
It sounds like a possible PSU problem.

Overclocking draws more current so while it might not be causing the problem, it will be adding to it - if it is a PSU problem.

Hmm. How would one test a PSU issue? Is there a way to measure load on the CPU Rails?

I had specifically chosen the Corsair 620HX based on recommendations here and expected OC's of CPU & GPU.

I've had the rig since August and the CPU has been OC'd pretty much since the start. Only started to OC the GPU within the last week.
 
bump

Anyone experienced anything similar? If it is a PSU issue, how good is Corsair's repair/replace policies?
 
diagnose by trying a different video card. is the gtx new or did you recently acquire it. how stable is your overclock. i typically don't sign of on an overclock unless it survives at least 12 hours of priming plus the real time hdr demo.
 
You have chosen the PSU well but as you can see you have a problem so some testing needs to be done.
Its possible the PSU has a fault.

When you boot the PSU is strained quite a lot as things power up.
The graphics card wont be clocked at that time but your CPU will be if you use the CMOS to overclock so its worth trying a lower CPU clock to see if it helps the boot problem.
If this works, it will either indicate an unstable overclock or a PSU that cant handle the load.
(other things could be the cause but for now I'll assume your hardware can work ok as this appears to be your only issue).

Really you need to try another quality brand PSU, preferably higher rated to get a definitive answer on the PSU.
Beg/borrow one but please dont go out and buy one yet unless you have another agenda that it meets.

ps this doesnt look like its anything to do with your gfx card as the gfx card isnt clocked on boot up and it works fine when clocked in windows.
 
My OC has been stable for months. I was 24 hour Prime95 stable and am pretty confident in its stability.

I don't have another card to try out. I've had this card since the completion of the build in August of 07.

I'll see about getting a repair from Corsair to see if that rectifies the problem. Maybe I can convince them to allow me to upgrade to the 750.
 
You would be wise to make sure that is the problem first.
 
You didn't mention if this is happening before or after POST. If it's happening before POST, then the problem is most likely not related to your OC (unless you flashed your card). That still wouldn't rule out your PSU.

I had a similar problem happen to me a few years ago using a 9500PRO. My system would POST (video was visible), but going into Windows there was no video. It seemed that Windows would load (by HD activity) okay. An OS reinstall was my last resort.
 
When it has the situation where it does not provide video, it boots into Vista x64 completely and without error. I unfortunately can not see anything so turn it off gracefully so I have to hit the Power button to get it to turn off.
 
Back
Top