Rosewill RP600V2-S-SL (mistake getting this?)

Hanz

n00b
Joined
Mar 21, 2004
Messages
14
Read the list of PSU's to avoid, i'm about 1 month late. Kinda rushed my new system.
:(
Currently motherboardless

AMD 64 X2 AM2 6000+
MSI NX8600GTS-C
Corsair Twin2x2048-6400C4HDX

4x 120mm fan
17-182-032-15.jpg

Model
Brand Rosewill
Model RP600V2-S-SL
Spec
Type ATX12V v2.01
Maximum Power 600W
Fans 1 x Silent 120mm Ball-bearing Blue LED Fan
PFC No
Main Connector 20+4Pin
+12V Rails 2
PCI-E Connectors 2 x 6Pin
NVIDIA SLI Support Yes
Modular Cabling Support No
Power Good Signal 100-500ms
Hold-up Time > 16ms
Efficiency > 72%
Over Voltage Protection +3.3V, +5V, +12V1, +12V2
Input Voltage 115/ 230 V
Input Frequency Range 50/60 Hz
Input Current 12A/ 6A
Output +3.3@30A,+5V@55A,+12V1@19A,+12V2@19A,-12V@1A,+5V SB@2.5A
MTBF 100k hours at 25°C, max. load, nominal input
Approvals CSA,UL,TUV, FCC
Features
Connectors 1 x 20+4pin Main Connector
1 x 4/8pin +12V Connector (ATX12V/EPS12V)
2 x 6pin PCI-Express Connector
4 x 5pin SATA Connector
6 x 4pin Peripheral Connector
2 x 4pin Floppy Connector
Features Complies with ATX12V v2.01 Version
Supports both Intel and AMD Systems
Dual 12V Rails provide independent reliable power
12V Combined output 35A
SLI Ready - Dual 6pin PCI-Express connectors
Silent 120mm Ball-bearing Blue LED Fan
Fan Speed Control Switch (low, auto, and high)
20+4 pin main connector for universal motherboard compatibility
Mesh sleeving on main cable for easier cable routing and better ventilation
Black Chrome Mirror Finish
Built-in inrush current, over temperature/current/voltage protection circuits
Safety & EMI Approval: CSA, UL, TUV, FCC
 
I don't think anyone's gonna recommend that brand on here ever, but its not gonna blow up your system. Seems like ample wattage and amps for your system. Plenty of people have had fine performance out of them, or else they just wouldn't be sold anymore. Just be on alert I suppose for anything?
 
I don't think anyone's gonna recommend that brand on here ever, but its not gonna blow up your system. Seems like ample wattage and amps for your system. Plenty of people have had fine performance out of them, or else they just wouldn't be sold anymore. Just be on alert I suppose for anything?

wrong, the rosewill 750s and 850s are widely praised.
 
Because it can destroy your system in the long run.

A lot of people here, seem to take this out of context. It's a very rare case this happens.

It's pretty easy to check your voltage rails to see how far theyre differing from what theyre rated. You can use your bios to check idle, and download various software programs to check while your system's in use. If the voltage isn't fluctuating severley, there's really no cause for concern. People around here seem to like to blow this way out of proportion.
The biggest problem from varying voltages has always been blown capacitors on motherboards, which isn't as big of an issue anymore that most boards use solid capacitors.
 
A lot of people here, seem to take this out of context. It's a very rare case this happens.

It's pretty easy to check your voltage rails to see how far theyre differing from what theyre rated. You can use your bios to check idle, and download various software programs to check while your system's in use. If the voltage isn't fluctuating severley, there's really no cause for concern. People around here seem to like to blow this way out of proportion.
The biggest problem from varying voltages has always been blown capacitors on motherboards, which isn't as big of an issue anymore that most boards use solid capacitors.

By this method you have no real idea what the actual voltage is on that rail. Not to mention the issue being discussed there was ripple not voltage regulation. Also solid caps are not immune from problems nor are all the other components in your system.
 
ahh you don't trust the bios? Multimeter until death? I didn't say the solid caps were immune, if you'd read, I said blown capacitors weren't as big of an issue. I also, said motherboard caps were the biggest problems, not that there weren't other problems.

You can pick and choose your points as you wish, but that doesn't change the reality, that any "decent" 500-600w power supply built today is not going to have problems running systems that aren't coming close to maxing out the power supply. The OP is using a single 8600gts, and a 600w rated power supply (obviously not coming close to the "max rated" output.. which you can peg as you'd like, differs by manufacturer), and at the max output is where voltage fluctuation occurs the most.
Note: And by stating decent this obviously includes powmax and similar psus. There obviously are some psus, you dont buy, period.

Could he have gotten a better quality power supply? Sure. Will he see any problems from the current setup he's using with this power supply? No, unless these psu's are prone to failures which I'm not aware of.
 
ahh you don't trust the bios?

No because I know software (including the BIOS) is wrong.

Multimeter until death? I didn't say the solid caps were immune, if you'd read, I said blown capacitors weren't as big of an issue. I also, said motherboard caps were the biggest problems, not that there weren't other problems.

They are not neccesarily the biggest problem or even the most prevelant. They may be what you think is the biggest problem with bad power supplies but you did not understand what was being discussed in the post you were dismissing to understand that the problems are far more widespread.
 
No because I know software (including the BIOS) is wrong.
What about multimeters being wrong? I have 2 multimeters that I used to test the power supply I currently have. 1 multimeter read above what the bios said, 1 multimeter read below what the bios said. Now which do I take to be the truth, the bios which is the middle or one of the multimeters? Frankly since all 3 are different I don't trust any of them.
 
fwiw, a friend bought a Rosewill PSU a while back...500w or something like that... and it was actually a re-branded Fortron.

come to think of it...he also bought a 1gb stick of ddr that was branded Rosewill....turns out all they did was put a Rosewill sticker over the PQI sticker. Talk about lazy.
 
What about multimeters being wrong? I have 2 multimeters that I used to test the power supply I currently have. 1 multimeter read above what the bios said, 1 multimeter read below what the bios said. Now which do I take to be the truth, the bios which is the middle or one of the multimeters? Frankly since all 3 are different I don't trust any of them.

That is going to depend on what was going on when you checked with the multimeters, where you checked, and the quality of the multimeter (accuracy and precision). All three things will change your results. The BIOS though reads from the winbound chip which samples from just one trace that is beyond the termination of the cable so it is not going to be representative of what the power supply is putting out at the end of the connector as the specification dictates.
 
fwiw, a friend bought a Rosewill PSU a while back...500w or something like that... and it was actually a re-branded Fortron.

come to think of it...he also bought a 1gb stick of ddr that was branded Rosewill....turns out all they did was put a Rosewill sticker over the PQI sticker. Talk about lazy.

Most video cards are the same, sapphire makes the majority of ati cards, and I think its foxconn that makes the majority of nvidia cards and other companies just relable them.
 
I have 3 of those power supplies. All the systems are Q6600 2.4@3.0ghz. I'm pretty happy. I don't know whether or not it's hurting my system.
 
I don't think anyone's gonna recommend that brand on here ever, but its not gonna blow up your system. Seems like ample wattage and amps for your system. Plenty of people have had fine performance out of them, or else they just wouldn't be sold anymore. Just be on alert I suppose for anything?

Rosewill RP.. UL 186010 = ATNG. So, going by the review of previous Rosewill ATNG units.. It's not bad.

If your system works for now... without issues... why sweat it?

Because a bad psu should be high up on your list of worries. Right up there with "is she pregnant?", "is he dead?", "Where is my paycheck?" etc..

Because it can destroy your system in the long run.

Rare, but not unheard of

A lot of people here, seem to take this out of context. It's a very rare case this happens.

It's pretty easy to check your voltage rails to see how far theyre differing from what theyre rated. You can use your bios to check idle, and download various software programs to check while your system's in use. If the voltage isn't fluctuating severley, there's really no cause for concern. People around here seem to like to blow this way out of proportion.
The biggest problem from varying voltages has always been blown capacitors on motherboards, which isn't as big of an issue anymore that most boards use solid capacitors.

Not really. Bios and software, not good. Go with a multimeter. Blown caps on the board is not a huge issue anymore, unless you use ECS or other boards like that. If you go with like, Asus, Abit, or Gigabyte (or something similar), you won't have those problems. Not as often as the old days whith Rulycon capacitors. All repsectable brands use respectable capacitors these days.

fwiw, a friend bought a Rosewill PSU a while back...500w or something like that... and it was actually a re-branded Fortron.

come to think of it...he also bought a 1gb stick of ddr that was branded Rosewill....turns out all they did was put a Rosewill sticker over the PQI sticker. Talk about lazy.

As far as I know, Rosewill doesn't rebrand Fortron/FSP. I might be wrong.

I have 3 of those power supplies. All the systems are Q6600 2.4@3.0ghz. I'm pretty happy. I don't know whether or not it's hurting my system.

You should be fine. Try keeping the case temps down, cause of everyone's favorite brand of delayed-failing capacitors, fuhjyyu.
 
wrong, the rosewill 750s and 850s are widely praised.

Ha just a general comment you silly goose. Whenever I read anyone seeking PSU advice, I never see Rose suggested ever. And I said its probably fine, anyway. Lot of people seem to bash anything not Corsair or a couple other names, on here.
 
RMA'd sending it back on Monday.

Corsair Power supply

CORSAIR CMPSU-620HX $139 AR ?
CORSAIR CMPSU-520HX $109 AR

CORSAIR CMPSU-750TX < overkill?
 
Back
Top