Abit IP35 Pro Questions thread

Glow

Supreme [H]ardness
Joined
Jul 20, 2002
Messages
4,834
Alright I'm sure I'm going to have some and some other people might as well.
The 2 gb lan ports it has are they both the same or different. IE DFI one was made my marvell one was something else. Which if either is faster.

Also what is this for, I found it in the drivers section: JMicron Installation Disk?

Are you guys using BIOS 14 or which ones?

Which intel chipset driver to use, Revision v 8.3.0.1011 or different?
 
I am going to be building my Abit ip35 Pro system here in a few days. I plan on installing WinXP SP2. I was hoping to find out what order to install drivers/etc. for the mobo? I am thinking about creating an automated WinXP SP2 install CD with NLite. This way I can include the necessary drivers during the install. I want to use a RAID 1 setup on the Intel ICH9R controller. I also want to include any updated drivers during the install if possible so I don't run into issues after installing the OS.

If anyone can provide some info on what is required with WinXP or point me to a FAQ for this info I would greatly appreciate it!

Thanks,

-scaryogre
 
what I do is install XP SP2, then chipset/audio/lan drivers etc. & then do all the Post SP2 updates.
I don't run RAID but you would have to slipstream those drivers into your CD or F6 with a floppy during the install.
 
I just built my first system using this board. I had absolutely no problems! Not one. I cannot believe what luck I had.
 
1333 - 1:1 | 1:1.2
1066 - 1:1.25 | 1:1.5
800 - 1:2 | 1:1.66
^-- to chose from on the Abit
I see for settings, my 650i had settings like 5:6
am I looking at the wrong thing? or what should I run a e4300 and ddr2 6400 at in this thing?
 
Is version 1.1 the latest for this board? I noticed ClubIT has it for $169.99 with a $15 MIR and thought I'd pick it up, but I wasn't sure about the version.
 
Stupid question so I won't create a new thead for it:

I have an abit ip35 pro and I do not want it to power my USB devices when the system is turned off. Right now external HDDs stay on and my Razer Krait stays lit up. Is there an option to disable this?
 
1333 - 1:1 | 1:1.2
1066 - 1:1.25 | 1:1.5
800 - 1:2 | 1:1.66
^-- to chose from on the Abit
I see for settings, my 650i had settings like 5:6
am I looking at the wrong thing? or what should I run a e4300 and ddr2 6400 at in this thing?
1:1.2 CPU : DRAM on Intel chipset is the same as 5:6 on nVidia.
You don't have the option of unlinked & you can't run lower than 1:1.

As for what you should run it at that all depends where you want to run it.
The lower the strap (800,1066,1333) th etighter internal latencise so you get higher performance clock for clock but may not be able to reach the same fsb (& hence core overclock) as on a looser strap.

Is version 1.1 the latest for this board?
afaik
 
I read this on anandtech:
abit IP35 Pro
Specs: P35 + ICH9R, PCIe x16/PCIe x1/PCI: 2/1/3 supporting CrossFire, PATA/SATA/eSATA: 1/6/2, RAID, dual PCI Gb LAN, ALC888, optical S/PDIF in & out, IEEE 1394
Price: ~$185
Notes: A drawback is its PCI Gb LAN that is about 20 to 40% slower than the PCI Express one.
^-------------------what does that mean? Soooooo is one port slower than the other or what? :confused:

1:1.2 CPU : DRAM on Intel chipset is the same as 5:6 on nVidia.
You don't have the option of unlinked & you can't run lower than 1:1.

As for what you should run it at that all depends where you want to run it.
The lower the strap (800,1066,1333) th etighter internal latencise so you get higher performance clock for clock but may not be able to reach the same fsb (& hence core overclock) as on a looser strap.


afaik
Not sure I follow I wrote a thing up for the 650i but the forum f'ed up now I'm trying to learn everything again. A e4300 doesn't it run at 800 or what strap?
 
I read this on anandtech:
abit IP35 Pro
Specs: P35 + ICH9R, PCIe x16/PCIe x1/PCI: 2/1/3 supporting CrossFire, PATA/SATA/eSATA: 1/6/2, RAID, dual PCI Gb LAN, ALC888, optical S/PDIF in & out, IEEE 1394
Price: ~$185
Notes: A drawback is its PCI Gb LAN that is about 20 to 40% slower than the PCI Express one.
^-------------------what does that mean? Soooooo is one port slower than the other or what? :confused:
No, they both run at the same speed.
Being on the PCI bus though they are slower (~20%) than if they were on PCI-E (as the IP35 & IP35-E have their single Gb LANs) but there is a valid design reason why they chose to go that way (basically it's all to do with the no. of PCI-E lanes available).
Even though they are on PCI they are capable of faster throughput than any single HDD can handle & tens of times faster than domestic broadband. In other words only a tiny, tiny % of people would have a genuine case of complaint against the lower transfer speed.


Not sure I follow I wrote a thing up for the 650i but the forum f'ed up now I'm trying to learn everything again. A e4300 doesn't it run at 800 or what strap?
at stock but by choosing another divider you can also change the memory strap.

An idea for you - why don't you list all the other questions that you think would be of interest to you or other potential purchasers & I & others will give you answers to those & then you can consolidate/edit those & the other ones already answered into an "IP35 questions answered" type of post at the start of this thread?
 
No, they both run at the same speed.
Being on the PCI bus though they are slower (~20%) than if they were on PCI-E (as the IP35 & IP35-E have their single Gb LANs) but there is a valid design reason why they chose to go that way (basically it's all to do with the no. of PCI-E lanes available).
Even though they are on PCI they are capable of faster throughput than any single HDD can handle & tens of times faster than domestic broadband. In other words only a tiny, tiny % of people would have a genuine case of complaint against the lower transfer speed.



at stock but by choosing another divider you can also change the memory strap.

An idea for you - why don't you list all the other questions that you think would be of interest to you or other potential purchasers & I & others will give you answers to those & then you can consolidate/edit those & the other ones already answered into an "IP35 questions answered" type of post at the start of this thread?

The questions come as I go, it's not like I have a bunch it's just at random, I'm trying to get everything down for when I get my board so it will be smooth sailing
 
Fine.
At a very high overclock the PWM can get a bit warm but directing some airflow to that area will resolve that.
 
all depends upon how rapid your vendor's sales & stock rotation are.
I'm sure that there are probably some 1.0s languishing on a shelf somewhere.
 
I have this board but I never got the windows application that shows the temp and stuff, it just crashes on my 64-vista. Any suggestions?
 
Does this board give accurate temp readings? uGuru is saying my CPU is at 20C when idle. That seems... low (it's not overclocked at all).

Oh, and I have a Q6600.
 
Does this board give accurate temp readings? uGuru is saying my CPU is at 20C when idle. That seems... low (it's not overclocked at all).

Oh, and I have a Q6600.

Dot know if it does, i only instaleld the uGuru stuff first time i booted from it, and dident like it s looks .. hehe . So i measure with coretemp beta 0.95.4

However, i set up some temps at where it should shutdown my puter if it reaches it, just to be safe =)
 
Does anyone know how well crossfire works on the IP 35 Pro? I have one and this January/February I will be upgrading my video card to either the RV680 or the new high end Nvidia card that are (hopefully) coming out around that time.

If Dual RV680 cards in crossfire outperform the new Nvidia card, I would want to get that, but how well does crossfire work on the IP 35 pro? The board has 2 X16 PCI-E slots, but the second PCI-E only works at 4X, so will that affect performance much? Do current graphics cards even use that much as it is? Of course, we don't know the specs of the new cards coming out, but how does it work with current cards, and if it does work fine, how close are todays cards getting to the 4X limit?

Thanks
 
Back
Top