Gears of War Performance Issues

Joined
Nov 7, 2007
Messages
6
First post! Anyway, here are my system specs (got my computer a week ago):
Area-51® ALX

High-Performance Liquid Cooling: Alienware® ALX High-Performance Graphics and Processor Liquid Cooling
Graphics Processor: Dual 768MB NVIDIA® GeForce™ 8800 Ultra - SLI Enabled - Liquid Cooled.
Processor: Intel® Core™ 2 Extreme QX6850 3.0GHz 8MB Cache 1333MHz FSB - Overclocked to 3.33GHz. - Liquid Cooled.
Memory: 4GB Low Latency DDR2 Performance SDRAM at 800MHz - 4 x 1024MB
Motherboard: Alienware® Approved NVIDIA nForce 680i SLI Motherboard
Operating System: Genuine Windows Vista™ Ultimate
System Drive: Extreme Performance (RAID 0) - 320GB (2 x 160GB) Serial ATA 1.5Gb/s 10,000 RPM w/ 2 x 16MB Cache
Primary CD ROM/DVD ROM: 20X Dual Layer DVD±RW/CD-RW Burner w/ LightScribe
Enthusiast Essentials: Dual High Performance Gigabit Ethernet Ports
Sound Card: High-Definition 7.1 Performance Audio
Power Supply: Alienware® 1000 Watt Multi-GPU Approved Power Supply
Monitor: Samsung 206BW (1650x1050)
Keyboard: Saitek II Backlit Keyboard
Mouse : Razer Copperhead™ High Precision Gaming Mouse - Tempest Blue

I tried running GOW on maximum settings (resolution: 1680x1050), and in no combat areas im maintaining a constant 60-62 FPS. Unfortunatley, once the combat starts the FPS goes very sparatic such as going down to 15 FPS and then back up to 40 FPS, which makes the game practically unbearable. I've made sure SLI was enabled (even tried it disabled) and I'm getting the same issues.


I have the COD4:MW Demo and it runs extremley smooth, with the highest settings available.

Any ideas on what the problem could be?

Thanks in advance for any help/suggestions.
 
no problems for me (sig), could be a driver issue, or you need to defrag your HD.
smooth as silk for me @1920x1200:D
 
no problems for me (sig), could be a driver issue, or you need to defrag your HD.
smooth as silk for me @1920x1200:D

Hmm... I've already updated to the latest Nvidia drivers (163.75) and defragged just yesterday.

Thanks for the suggestions.
 
This helps me how?



Wouldn't you say with my specs, I'd be able to run in DX10 with no issues?

Read our Gears of War article on the front page, there is no reason to run in DX10 mode other than to enable 4X AA if you have the horsepower for it, otherwise turn DX10 to "Off" in the game, you will see a perf improvement.
 
Would it hurt to try? Unless your in love with AA, I think you can try DX9...
Of course it wouldn't hurt to try, and it would probably even run great. But what's the point of buying a very high-end gaming PC and I can't even play GOW on it's highest available settings?

Read our Gears of War article on the front page, there is no reason to run in DX10 mode other than to enable 4X AA if you have the horsepower for it, otherwise turn DX10 to "Off" in the game, you will see a perf improvement.

I read the article, it was very well written and thorough. I am indeed going for the 4x AA, and I'm sure I have enough "horsepower" to pull it off, but I'm still getting performance issues. I posted my specs, wouldn't you say thats more then enough to handle DX10 with 4x AA and everything else on their highest settings?
 
try 169.04 beta drivers. This what happens when you buy overpriced PCs :D
 
That's got to be an SLI/DX10 issue. Runs well for me on my lowly 320meg GTS in 1680x1050 with textures set to "highest". I did bump shadows down to medium, everything else on high. I'm running XP though with the 169.04 drivers.
 
Back
Top