8400 and h.264 not working

ameer214

Weaksauce
Joined
Jan 9, 2006
Messages
99
Hello,

I can't seem to off load the h.264 decoding to the gpu. I have a nivida 8400gs and I am using CoreAVC 1.6 decoder. I am playinng the movies on windows media player and windows media center. Do I need a specific player to have the decoding done in the GPU instead of the CPU?

I can tell that the GPU is not decoding by the 100% CPU usage.
 
The 8400GS is the weakest card (next to the HD2400Pro) and does not do H.264 or VC-1 very well.

If you want to totally offload the processes from the CPU, you need at least an 8500GT or above.

Also, if it is using TurboCache that will REALLY slow your machine down.
 
how do I off load any of it? I understand that the 8400 is a weak card but its suppose to off load at least a little bit right?

I cannot get this card to offload at all. Also a friend of mine has a 8600 and his card doesn't offload at all, so we are both missing some key information that apprently is common sense to everyone else.

I do not understand turbocache, what do you mean by that
 
Turbocache is Nvidia's way of taking some of your system RAM so the video card can have more framebuffer.
 
No I didn't, I read somewhere that I don't need to install purevideo. Does purevideo cost money?
 
I think you get it for free with the 8600 and lower cards, not sure though.
 
I thought that PureVideo and PureVideo HD were hardware (GPU) accelerated encoding/decoding processes on the video card itself.

Are you sure you need the codec software in order for this to work?


I do know that when encoding H.264 with this card, it goes MUCH faster than my other, non-PureVideo HD cards. Also, playback is smoother, though I'm not playing the video at 1920x1080, normally much lower resolutions. I would do higher, but my monitor doesn't even support res's that high, so there's no point (for me that is) to encode at HD size resolutions.
 
U definately need purevideo HD to make it work and yes it cost. and if u r playing a x264 file then what I have experienced is that it doesnt work but if u play a H264 file with purevideo it will work. Dont use coreavc if u want to use ur GPU to do the work.

Its weird that x264 file dont work but gimme a msg if it worked for u.
 
o.k, I thought h264 was the same as x264. What are the diffrences? The movies I have are x264. Also, I can't find purevideo HD software anywhere. All I see is purevideo. Isn't Purevideo HD a technology built into the GPUs and not a software?
 
Okay, first of all, x264 is not the same as H.264. They're similar, they follow the same idea, but they are not one and the same.

Second, PureVideo HD is not software, it's what they call the hardware HD decoding built into the card. The confusion is caused by the fact that the PureVideo software is for hardware MPEG-4 decoding.

Third, CoreAVC is a software decoder. How on earth did you think a software decoder was going to use your video card? To get hardware decoding, you need a commercial decoder: CyberLink PowerDVD 7.3 has one.

And last, I'm assuming you downloaded TV shows or movies encoded in x264 in Matroska (MKV) containers. To use MKV files, you need the Haali media splitter. However, Haali sucks, so you won't be able to get hardware acceleration with it. You'll have to use the included mkv2vfr command-line tool to convert your video to AVI, then you need to use mkvtoolnix to rip the audio stream from your MKV, and finally, you need to either use some software to join them into one AVI, or simply use Media Player Classic to play them together (it lets you play the audio separately as a dub) -- after you set up MPC to use the CyberLink decoder.

If you're lucky, it will work and will handle some videos with hardware acceleration. But, from my experience, I've managed to get 720p with GPU acceleration, but not 1080p.


Get a good processor, stick to CoreAVC. There is no other real alternative. PureVideo and Avivo will only decode Blu-ray and HD DVD discs, but only after you purchase the decoders separately.
 
Wow, thanks for that explaination. lucky I got a dual core processor as a backup so I am going to be using coreAVC.

I really appreciate the info, now I don't have to waste time trying to get something to work that isn't really worth the time.

I will try your suggestions and let you know how it came out.
 
Back
Top