$800 Starter Budget for Gaming

HTown Max

n00b
Joined
Sep 30, 2007
Messages
8
I bought a Dell Dimension about 5 years ago to play Battlefield 1942 when it first came out. I've upgraded it many times to play Doom 3, Half-Life 2, WoW, and others.

I'm looking to start with a new foundation to last me another 5 years or so. Reliability is HUGE for me. I've only had to replace a couple HDs that went bad in my Dell over the last 5 years. I have a 20" Dell 2007WFP so I'll need something that'll do HD. Here is what I have so far:

COOLER MASTER RC-690-KKN1-GP Black SECC/ ABS ATX Mid Tower Computer Case - Retail - $59.99

MSI NX8800GTS-T2D640E-HD OC GeForce 8800GTS 640MB 320-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card - Retail - $364.99

CORSAIR CMPSU-520HX ATX12V v2.2 and EPS12V 2.91 520W Power Supply - Retail - $109.99

Crucial Ballistix 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model BL2KIT12864AA804 - Retail - $129.99

Intel Core 2 Duo E6750 Conroe 2.66GHz LGA 775 Processor Model BX80557E6750 - Retail - $192.99

ABIT IP35 Pro LGA 775 Intel P35 ATX Intel Motherboard - Retail - $184.99

This all totals about $1,000 so you can see that I'm already over budget. I'm still missing CPU cooling (I don't want to stick with the stock fan) and a HD (thinking 320Gb Baracudda). I think the case and processor are a great bang for the buck. Can someone help me trim this down a bit and recommend a good HD and CPU cooler?
 
Here's a wishlist I threw together

https://secure.newegg.com/NewVersio...hListNumber=8388027&WishListTitle=Cheap+Intel

It's 510 with everything. Course you can switch out the vidcard and make it 800.

Also if you like reliability you can switch out the 2 HDs for something you trust more.

That's intel. I got another one basically the same for AMD.

Oh, and it's also meant to be overclocked.


Tell me if the wishlist doesn't work. I put it to shared so you just might need to sign in and then click the link.
 
What features on a motherboard do you need? To save some cash, drop the mobo down to whichever P35 board suits your needs. Do you need Firewire? RAID? etc...

You could also drop the PSU down a bit. Check out the XClio Goodpower or Stablepower 500W, or the Enhance 5150GH.

Where are those prices from? The Ballistix are only $110 - $47MIR at the egg.

CPU Cooler: Scythe Ninja Plus Rev.B or Tuniq Tower 120
HDD: Seagate Barracuda 7200.10 320GB 7200RPM SATA300 16MB Cache
 
The cheap Intel list was a little too bare IMO.

I don't need RAID and I have a PCI Firewire card right now. So I dropped down to the IP35-E. I accidentally swapped the prices on the Ballistix and the PSU.

So here is what I have now for about $1,022:

COOLER MASTER RC-690-KKN1-GP Black SECC/ ABS ATX Mid Tower Computer Case - Retail - $59.99

Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM - $79.99

MSI NX8800GTS-T2D640E-HD OC GeForce 8800GTS 640MB 320-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card - Retail - $364.99

XCLIO STABLEPOWER 500W ATX 500W Power Supply - Retail - $69.99

Crucial Ballistix 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model BL2KIT12864AA804 - Retail - $109.99

ABIT IP35-E LGA 775 Intel P35 ATX Intel Motherboard - Retail - $114.99

Intel Core 2 Duo E6750 Conroe 2.66GHz LGA 775 Processor Model BX80557E6750 - Retail - $192.99

Scythe SCMNJ-1000 80mm Sleeve "NINJA MINI" CPU Cooler - Retail - $29.99

The Ninja Plus is out of stock at the egg and the Tuniq Tower is a little pricey. I may toy with overclocking but probably not out of the box. I'm going from a P4 2.4Ghz to this so I don't think I'll see a need to overclock right away. Are there any nice Asus motherboards that are cheaper than the Abits?

Anyone know if this stuff can be picked up any cheaper at a local Fry's? I go there all the time but never to buy PC hardware.
 
You can actually get the board for $90 - $20MIR (rebate expires tonight!!!) at mwave.com... so order now, lol. To make the shipping charge worth it, get the E6750 there as well.

$89 - ABIT IP35-E LGA 775 Intel P35 ($20 MIR)
$189 - Intel Core 2 Duo E6750 Conroe 2.66GHz

Low end Asus = AsRock. Stick with Abit or Gigabyte.

The Ninja is in stock.. go for it instead of the mini:
$35 - Scythe SCNJ-1100P Ninja Plus Rev.B 120mm CPU HSF

Fry's is hardly ever cheaper than newegg or other online etailers. Sometimes they have deals on cases and HDDs, but most of their CPU/Mobo combo's use ECS. They did have the E6750/IP35-E combo for $250AR once (labor day; sold out quick), but I think the next big sale is far away (black.friday).
 
Thanks for turning me on to mwave. I've never been to that site before. I'm not 100% ready to order tonight but I appreciate the heads on that sale.

I always thought Abit and Asus were top-notch. I used to have one of each a long time ago. On the Abit I was overclocking a Celeron 300 to 550 and to my knowledge that box is still running (gave it to a friend for a low-use webserver).
 
Thanks for turning me on to mwave. I've never been to that site before. I'm not 100% ready to order tonight but I appreciate the heads on that sale.

I always thought Abit and Asus were top-notch. I used to have one of each a long time ago. On the Abit I was overclocking a Celeron 300 to 550 and to my knowledge that box is still running (gave it to a friend for a low-use webserver).

According to Dan.D (mobo editor), Asus and Gigabyte are in the top tier (ship the most)... Abit ships a bit less. Almost any P35 board from any of those afformentioned companies should OC well. AsRock is Asus' spinoff company, for budget boards (to compete with ECS).

My Abit BE6-II is still rockin, but my Celeron300A was replaced a while ago (with a P3 850, IIRC), lol.
 
Get a E4300 and OC it. It's what I have, I've oc'd it up to 3.0GHz and it's F-A-S-T. Not to mention it only cost $120. Also, if you don't need SLI or RAID, you can get a cheaper motherboard. My Gigabyte DS3L costs $92 and it's awesome.

BTW, keep the CoolerMaster case in your cart. It's pretty much the best case I've ever owned. Just thought you would like some advice from someone who owns the products. ;)
 
Unless you can find random deals all over the net, hitting $800 with the brands and stuff selected will be rough.

You can already shave 25 from the case. It's just a case.

The CPU can be downgraded and you can shave another 50 bucks from that or so.

Besides that, I don't think you'll get much lower without going to lesser known brands.
 
Just realized you have a 20" monitor. If you want to save $100, drop down to the 8800GTS 320MB. You may have to turn down a few settings but the 320MB should be enough for your needs. Or you can go with the HD 2900 Pro. Early reviews of the card says that it performs about the same as an 8800GTS 320MB and can OC to HD 2900XT speeds. And it's only $270:

Sapphire 100212SR Radeon HD 2900 Pro 512MB PCI-E Video Card - $270
eVGA 320-P2-N811-AR GeForce 8800GTS 320MB PCI-E Video Card - $290

Early review of the 2900 Pro and Overclocking the 2900 Pro:
http://www.tweaktown.com/reviews/1189/1/page_1_introduction/index.html
http://www.xtremesystems.org/forums/showthread.php?p=2462022#post2462022
 
Thanks for turning me on to mwave. I've never been to that site before. I'm not 100% ready to order tonight but I appreciate the heads on that sale.

The rebate has been extended for OCT.... fyi.

$265 - Sapphire 100212SR Radeon HD 2900PRO 512MB HDCP
$125 - Intel Core 2 Duo E4400 Allendale 2.0GHz 2MB L2
$89 - abit IP35-E LGA 775 Intel P35 ($20 MIR)
$70 - XClio Stablepower 500W PSU
$69 - Hitachi T7K500 HDT725032VLA360 320GB 7200RPM SATA300 16MB Cache
$63 - A-DATA 2GB (2x1GB) DDR2-800 ADQVE1A16K
$35 - Scythe SCNJ-1100P Ninja Plus Rev.B 120mm CPU HSF
=============
$716 + tax and shipping - $20MIR

Now choose a case with money leftover.


Oh, btw, if you want to go to Fry's:
E6750 + GA-P35C-DS3R for $300 @ Fry's B&M: http://www.netaffilia.com/ad/electronics/frys/i/2007/09/28/27141.html
 
I would go with the IP35-E over the IP35 Pro. Sure the Pro is better but it's also more expensive. You can determine for yourself if you need the extra features. Just another note: You can get a 700W PSU for $5 less (after rebate) as the 520W corsair that you selected.
 
I would go with the IP35-E over the IP35 Pro. Sure the Pro is better but it's also more expensive. You can determine for yourself if you need the extra features. Just another note: You can get a 700W PSU for $5 less (after rebate) as the 520W corsair that you selected.

Just a note, that GXS 700W OCZ PSU has a lot of ripple at high loads. Ripple kills your components over time. Why run the risk when there are better choices out there? FYI, this is common to all FSB Epsilon based PSUs. While its not a bad price, I'd go for the Antec True Power Trio 650W for $70AR instead.
 
Just a note, that GXS 700W OCZ PSU has a lot of ripple at high loads. Ripple kills your components over time. Why run the risk when there are better choices out there? FYI, this is common to all FSB Epsilon based PSUs. While its not a bad price, I'd go for the Antec True Power Trio 650W for $70AR instead.

Ripples are only likely to occur at only very high loads where most of the PSU's power is being used. I doubt that the average user approaches such peaks. Anyway, here is a review I found that analyzes ripples and found no problems with the OCZ GXS 700W.
 
Ripple kills parts OVER TIME. The FSP Epsilon PSUs are spec'd to 200mV ripple... the ATX spec only allows 120mV. While it may take a while to kill them, its still not worth the risk, IMO.

Ripples are only likely to occur at only very high loads where most of the PSU's power is being used. I doubt that the average user approaches such peaks.

Yah, but like I said, why even bother when there are better choices? Even if I needed a 700W PSU, it sure as hell wouldn't be the GXS, because that would run the risk of a high load and some ripple. If I needed anything less, the Trio 650W would still be a much better choice than the GXS since its cheaper BEFORE rebate, and much less afterwards. So, I don't see why anyone would recommend the GXS. ;)

$105AR - 700W GXS (but not really 700W, because if you put a high load on it, it has out of spec ripple)
$70AR - 650W Trio
 
Yah, but like I said, why even bother when there are better choices? Even if I needed a 700W PSU, it sure as hell wouldn't be the GXS, because that would run the risk of a high load and some ripple. If I needed anything less, the Trio 650W would still be a much better choice than the GXS since its cheaper BEFORE rebate, and much less afterwards. So, I don't see why anyone would recommend the GXS. ;)

$105AR - 700W GXS (but not really 700W, because if you put a high load on it, it has out of spec ripple)
$70AR - 650W Trio


According to several reviews that I have read, there are NO ripple problems with the GXS. Take a look:
http://www.phoronix.com/scan.php?page=article&item=502&num=1
http://www.extremeoverclocking.com/reviews/cases/OCZ_GameXStream_700W_1.html
http://www.techpowerup.com/reviews/OCZ/GameXStream700W
http://techgage.com/article/ocz_gamexstream_700w/
http://www.overclockercafe.com/Reviews/other_misc/OCZ_GameXStream/index.htm
http://www.cluboverclocker.com/reviews/power/ocz/gamexstream700/index.htm
http://www.pcper.com/article.php?aid=333

What are your source(s)?
 
Heh, you went from some ripple, to no ripple... Its a well known problem with FSP Epsilon based PSUs. Maybe FSP has corrected the issue, maybe not.


How about I just agree with you that there are no longer any ripple problems with the PSU? It'll save me much more time. I already agreed that the ripple problems won't affect most users, but now you want me to say there is no ripple... fine. There is no ripple.

Nonetheless, the Trio is still a better deal.

To help the OP, since he needs neither a 700W nor a 650W, here are other PSU suggestions:
http://www.jonnyguru.net/forums/showthread.php?t=1460
 
According to several reviews that I have read, there are NO ripple problems with the GXS. Take a look:
http://www.phoronix.com/scan.php?page=article&item=502&num=1
Uses a system to test; System pwm filters ripple. No ripple testing. No actual load numbers, no efficiency figures.
No published testing methodology. No ripple charts. No efficiency figures, no actual load numbers.
Uses a test system. No accurate ripple testing, as a result
Test system, no ripple testing, no actual loads.
test rig, no ripple, no loads, no efficiency figures.
Once again, uses a test rig with no measurements for ripple.

Find me a review that uses a proper load tester, proper test methodology, ripple charts, and efficiency figures. There are two: [H]'s review of the OCZ GXS 1010w (Which also shows it not being able to put out the rated 1010w), and JonnyGURU's (which was the original review that showed the ripple).


Even if the ripple was only at very high loads, that's not the point; Why are you paying for a 700w psu that can only do 500w reliably while remaining in spec? Why not just buy a 500w that can be loaded all the way up while remaining in spec?
 
Agreed. Jonny Guru does find some ripple, but I also read about OCZ fixing this in the newer releases. Nevertheless, I doubt that I will ever get close to 700W so I won't worry about this. :) But yes, if OP does not need 700W of power, he can obviously get less wattage for less money.
 
Agreed. Jonny Guru does find some ripple, but I also read about OCZ fixing this in the newer releases. Nevertheless, I doubt that I will ever get close to 700W so I won't worry about this. :) But yes, if OP does not need 700W of power, he can obviously get less wattage for less money.
We understand that you have it in your computer so it must be 1337 but their are BETTER options even in the area of 700w for less money. BBQ is one of the PSU nuts in the forums and has a much better understanding of the PSU then you or me. From the looks of your sig you bought your PSU based solely on marketing. My PSU would more then handle your system.
 
Hehe, I was hoping BBQ would stop by here and pick those reviews apart. Long time no post in genhard!

From the looks of your sig you bought your PSU based solely on marketing. My PSU would more then handle your system.

Antec True Power 2.0 500w

Intel Core 2 Duo E6750 @ 2.72 Ghz
ABIT IP35-E (P35) LGA775
Patriot 2GB PC2-6400 DDR2 800
Seagate 320GB 7200.10 SATA
Seagate 500GB 7200.10 SATA
ATI X800 256mb
Lite-On 20X DVD+/-RW
OCZ 700W ATX12V PSU
Antec P180B Performance Tower
4 Antec TriCool 120mm Fans

I agree, the SP2.0 500W can handle such a system if it isn't defective (like so many were) and kept in a cool operating environment (fuhjyyu caps hate heat). In fact, I was using the SP2.0 500W when I was bench testing my E6750 system (borrowing my 7800GT from main rig) before my Corsair 520W was delivered. My SP2.0 500W was a great deal... $15 after a $50MIR. :D I used the money saved on the $45 Tuniq. ;)
 
Hehe, I was hoping BBQ would stop by here and pick those reviews apart. Long time no post in genhard!





I agree, the SP2.0 500W can handle such a system if it isn't defective (like so many were) and kept in a cool operating environment (fuhjyyu caps hate heat). In fact, I was using the SP2.0 500W when I was bench testing my E6750 system (borrowing my 7800GT from main rig) before my Corsair 520W was delivered. My SP2.0 500W was a great deal... $15 after a $50MIR. :D I used the money saved on the $45 Tuniq. ;)
I'm still a little paranoid about mine(think it comes from being in New England too long) but in my case I think it should be running plenty cool. I've considered buying a new PSU a 100 times but just can't justify it who knows maybe some day I'll get a wild hair across my ass. I had a Hpyer 580 until it blew up late one night and had to RMA it so I bought my Antec at Staples for 40.00 and sold the Hper to a buddy.
 
You can get the Corsair PSU for cheaper here:
Corsair HX520 520W PSU - $100

That final price of $80.99 (after MIR) for the Corsair 520w is a very good deal. I've seen them for sale online for as low as $89 without MIR so shop around. I'd take the Corsair over any Antec, OCZ, or FSP any day of the week but thats just me.
 
Build looks ok but for the money ur paying eh

BIOSTAR TFORCE TF520-A2 AM2 NVIDIA nForce 520 = 60

Western Digital Caviar SE16 WD3200AAKS 320GB 7200 RPM SATA 3.0Gb/s = 74.99

XCLIO STABLEPOWER 500W ATX 500W Power Supply = 69.99

EVGA 640-P2-N821-AR GeForce 8800GTS 640MB 320-bit = 370

AMD Athlon 64 X2 6000+ Windsor 3.0GHz Socket AM2 Processor
= 224 Combo deal
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800

Coolmaster 532 = 65 shipped

120mm fan for the exhaust = 5

that whole build costed me 881 i would spend the extra 81 and get this. That combo deal with the ram is a killer ! ends 10/8 i would take
advantage if i were u !


give me ur email and ill send u this whole build from newegg! the combo deal on the processor and ram ends 10/8 TAKE ADVANTAGE!!!
 
that whole build costed me 881 i would spend the extra 81 and get this. That combo deal with the ram is a killer ! ends 10/8 i would take advantage if i were u !

The 6000+ can't OC too high, while the E4400 can OC up to 3.4Ghz. The E4400 will outperform the 6000+ when OC'd to 3.4Ghz.

So, you pay more for performance out of the box (AMD), but you can save $81 and get better performance with OC'ing (Intel).

However, OC'd speeds is never guaranteed. So, the AMD build is still a good choice.
 
You wouldnt need to OC the e4400 to 3.4 to get it to beat the 6000+. Another point in favor of the intel build is that the mobo will take quad and future CPUs. AMD mobos havent yet proven they have an upgrade path. The AMD 6000+ build is not a bad build if you dont want to deal with OCing.
 
Thanks for all the awesome advice. I pulled the trigger on my last posted setup for right at $1,000. I went a little over budget but I felt that there would be good reliability in my purchase.

About the OC stuff... I've OC'd in the past and never had a problem with it. Since I'm making such a major jump, I probably won't OC this rig out of the box but it is something I'm keeping in mind. In the future I like having the ability to overclock it to "keep up" with some of the trends without buying expensive new hardware. The Abit board was specifically kept for it's ability to accept Quad core processors if I do want to upgrade it.

So while I was working with a budget, quality and reliability drove me to my final price. I plan on taking pictures of the buildup and the final results with benchmarks so stay tuned...
 
Back
Top