Is this how I do it?

Joined
Jul 12, 2007
Messages
54
Ok, so I've g all the bits and parts for my new computer, and now it's time to start building. I want to know, is this how I build it?

1. Mount PSU in case
2. Put in DVD, Floppys
3 Put CPU on Mobo
4. Add HSF
5.Install RAM
6. Put in HD
7. Mount Mobo
8. Put in GPU
9. Plug everything in
10. Power up
11. Install OS
12. Install everything else
13. OC

Thanks in advance :D
 
Well that would work, but depending on your case it maybe easier to mount some drives afterwards. basicly whatever way it seems to fit together best. But the part about installing the ram and CPU before mounting the MOBO is good but just make sure that you're not useing the Heatsink as a gripping point when you put the Mobo into the case.

Also depending on how you're doing the cableing you also might want to run some cables before you mount everything.


Also, you've prolly included it into install OS, but dont forget up to date drivers from the manufactures websites. and if you're useing windows then do the updates.
 
It really depends on your case too.

Some cases are too small to mount motherboards in without removing the harddrive rails and power supply.

Some cases are large enough for it not to matter.

Just use common sense, and refer to your case and motherboard manual.
 
your building your first pc and u want to oc that soon? i think you have some to learn before you o/c
 
Ok thanks =D, I just wanted to clarify, as I've never done this before.

Whats wrong with OCing? I've got to try sometime =P, I'll probably wait a week before I start that though.
 
Whats wrong with OCing? I've got to try sometime =P, I'll probably wait a week before I start that though.

Oh theres nothing wrong with OC'ing except without knowledge it might make your pc go boom ;)

I would learn the ins and outs of how a pc work before you even comtemplate overclocking. It will save you alot of headaches down the road.
 
ah ok I see lol. I thought all you did was raise the voltage and make sure it was still stable :p ... I think I'll ask my neighbor to do it for me then :p
 
Yeah I've never OC-ed so I'm no expert but I beilve raising the voltage is the last step, and only if you cant get you're gear to run stable at stock voltages. I think OC-ing for a chip is really just raising the FSB, that combined with the multiplier will give you your chip speed. and then you just need good ram that can keep up with the fast FSB......Or I could be wrong, like I said I havent dont it yet so I dont know.
 
Well I'm pretty sure everything I have is fine for OCing. I have the E4400 Processor, SLI 650i board, and 2GB DDR2 800mhz RAM.
 
Well I would take a walk over to the OC-ing forum and read some of there guides, Also if you have a second PC or a Laptop that you can have next to you while doing the OC-ing so you can follow the guides step by step, that would prolly be helpfull. Guess the best advice I've seen about over clocking is that you have to take it slow, small steps, dont try to just crank it to 11 on your first try.
 
haha that's the sort of thing I would have done, just crank it =]. Yea I have a laptop to look at while I do it, thanks for all the advice =]
 
Oh theres nothing wrong with OC'ing except without knowledge it might make your pc go boom ;)

I would learn the ins and outs of how a pc work before you even comtemplate overclocking. It will save you alot of headaches down the road.

With today's chips it is very difficult to fluff it up, the worst case scenario, it wont POST. ;)
 
Yeah I've never OC-ed so I'm no expert but I beilve raising the voltage is the last step, and only if you cant get you're gear to run stable at stock voltages. I think OC-ing for a chip is really just raising the FSB, that combined with the multiplier will give you your chip speed. and then you just need good ram that can keep up with the fast FSB......Or I could be wrong, like I said I havent dont it yet so I dont know.

All you have to do is raise the FSB, on C2D's the multiplyer is locked. Your RAM should easly be able to get a e43/400 to 3ghz stable.
 
With today's chips it is very difficult to fluff it up, the worst case scenario, it wont POST. ;)

That is true. But some people take it to the edge where it does POST, but still gets too hot all the time and locks the PC up or crashes it, and eventually destroy their hardware.
 
That is true. But some people take it to the edge where it does POST, but still gets too hot all the time and locks the PC up or crashes it, and eventually destroy their hardware.

Something tells me he is not the type of person to crank it up to 4ghz and not ask if everything looks okay. ;)
 
Haha no, I was just going to put it up to about 2.8ghz

i ended up getting the

E4400 Processor
2Gb DDR2 800mhz RAM
Centurion 534 case
GeForce 7600Gt Graphics Card
sli 650i board
PATA HD
x1 DVD optical drive
Xcilo 500Watt PSU

Yea i'm not done building yet. I transfered all my old data to my dad's comp a few days ago, but today his hard drive crashed =\. It does that click.click.click sound when you try to boot and it doesn't load all the way. he might need to borrow my HD to transfer data back before I reformat it =\
 
Back
Top