Draft Build: Gaming/Modeling/Design Box

gwai lo

[H]ard|Gawd
Joined
Aug 31, 2004
Messages
1,690
I know Crysis isn't out yet...but I don't think the current generation will be able to run it full, much less just one of them.

I don't really have qualms about anything beyond that, except the Asus board's price tag is scary. :( But if you use all that stuff, then go for it.
 
OK... HELP!

After much thought, consternation and too much time trolling the forums [kiss-ass] [H] is the most helpful tech online community on the planet. [/kiss-ass] :p I'm settling down to a build looking like this, via AVADirect.

Please fire away. The major caveat is that I'm rather itching to wait for the X38/G92/Penryn releases but my current box is starting to give me warning signs (it knows it's days are numbered and is sticking its tongue at me).... so if, for this kind of $$$ range you think I'd best wait, I'll try to. Otherwise I'll pull the trigger.

Monitor will likely be a Planar 26" or similar. I want to be able to drive Crysis at full eye candy at 1920 etc.

Wondering about RAM??

INTEL, Core™ 2 Duo Q6600 Quad-Core, 2.4GHz, 1066MHz FSB, 8MB (2 x 4MB) L2 Cache, 65nm, 105W

TUNIQ, Tower 120 CPU Cooler (Or the Ultra if it'll fit)

ZALMAN, ZM-MFC2 4-Channel Fan Controller

ASUS, P5K Deluxe/WiFi-AP, LGA775, Intel P35, 1333MHz FSB, DDR2-1066MHz 8GB/4, PCIe x16 /2 CF, SATA 3Gb/s RAID 1 /8, HDA, GbLAN /2, FW /2, WiFi, ATX

G.SKILL, 4GB (2 x 2GB) PC2-6400 DDR2 800MHz CL5 (5-5-5-15) SDRAM DIMM, Non-ECC

eVGA, e-GeForce 8800 GTX 621MHz, 768MB DDR3 2GHz, PCIe x16 SLI, 2x DVI, HDTV/S-Video/Composite Out

CREATIVE, Sound Blaster® X-Fi™ XtremeGamer Fatal1ty™ Pro Series, 7.1 channels, 24-bit 192KHz, PCI

WESTERN DIGITAL, 150GB WD Raptor®, SATA 150MB/s, 10000 RPM, 16MB cache
SEAGATE, 500GB Barracuda 7200.10, SATA II 300MB/s, 7200-RPM, 16MB cache

SILVERSTONE, Temjin TJ07 Black Mid-Tower Case

THERMALTAKE, Toughpower 1000W Power Supply, 24-pin ATX12V EPS12V, Quad +12V, Quad Ready

Dual Boot:
Windows Vista Ultimate Edition 64-bit (Home Premium??)
Windows XP Pro (Primarily for gaming performance and older software compatibility/stabilty


Lemme have it. :eek:
 
Anybody getting dual boot with these two flavors to work well? I've not tried it.
 
Vista gaming performance is now on par with XP in most cases, and with 4 gigs of RAM, you'll need to use a 64-bit OS in order to utilize it all. Furthermore, XP 64 is an odd duck and a particularly bad gaming platform (due to lack of support and good drivers.)

My advice is to just stick with Vista x64 and forget about the dual boot.

Mark.
 
Vista gaming performance is now on par with XP in most cases, and with 4 gigs of RAM, you'll need to use a 64-bit OS in order to utilize it all. Furthermore, XP 64 is an odd duck and a particularly bad gaming platform (due to lack of support and good drivers.)

My advice is to just stick with Vista x64 and forget about the dual boot.

Mark.

Thanks- Yeah, XP would have been 32bit.

My "power-user" friends have almost all reverted from Vista 64 to 32 or XP so I'm a bit nervous about not having both... but I know it gets better every week.
 
Is that power supply overkill? I could go SLI at some point... and I don't need WiFi... is there a comparable P5K without?
 
P-35 boards can't go SLI. Some can go Crossfire, but for if you're truly after a Crossfire setup, then you're better off waiting for an x-38 board. For SLI, you need a 680i board instead.

Mark.
 
Understood. I'll make the switch if I go that direction.

I changed the mobo for now to the standard p5k without the wifi, and the power to the Enermax 850
 
There are currently no Vista drivers for an X-Fi. Without even considering why you are wasting your money on the Fatal1ty version, I would advise against this pairing, even with a dual boot setup. I have no idea how that would end up working.
 
I keep seeing threads saying the drivers are out... is that not true?

As far as the card... it's marginally more expensive and in the studio work I've done the 192khz fidelity was preferrable though not critical on this rig.
 
I really probably should just stick with XP for now and avoid the frustrations.... :mad:
 
X-Fi is one of the few remaining cards that has terrible driver support for Vista. Yes there are drivers, but they're flaky and don't offer all the features found in XP drivers. I have Vista x64 and a working X-Fi card, but I'm using older (March 07) drivers, because the latest don't work on my system. I'm also using software compiled by a third party to enable features and applications not present in Creative's own drivers.

My advice, however, is to go with Vista x64 and drop the X-Fi, not keep the X-Fi and stick with XP 32. Keep in mind that with an X-Fi card and a GTX, you'll only be able to use 3 gigs out of the 4 gigs of RAM you purchase for your system, and with two GTX cards in SLI, the most you'll see is 2.5 gigs. Having the full four gigs of RAM with a 64-bit OS outweighs having an overpriced, and somewhat useless sound card (especially when on board sound is quite adequate these days.) If and when X-Fi drivers improve for Vista, I would then get that X-Fi sound card. I also wouldn't waste money on the Fatality version, which comes with that useless extra RAM.

EDIT: If you do studio recording work, then there several alternative sound cards available with good vista support (although the names escape me at the moment.) However, what I'd personally go for is an external USB sound card / box, such as an M-Box. Keep in mind that the cheaper X-Fi Platinum has all the features of the Fatality except for the extra RAM.

Mark.
 
Thanks Mark- the M-box might just be a solution I hadn't thought of. Use them at work.

So onboard sound is really that good these days? 3 years ago it was: :rolleyes: and so I've always been about cards.
 
On-board sound is most sufficient for Vista. If you care about having a 24-bit Crystallizer, or some of the more advanced features of an X-Fi, then you'll need the X-Fi. However, for everyday use, on-board sound will power a headphone, 2 speaker, or 5.1 speakers system quite well I believe.

Mark.
 
Look into the Gigabyte GA-P35-DS3R or the Abit IP35 boards. I think they're better than the P5K vanilla.
 
I think I'll drop the Raptor and just go with the Seagate 72.10... thoughts?
 
I agree cost of raptors are too high for the performance. Seagate 72.10 in raid 0 will give near too close same performance levels.
 
I think I'll drop the Raptor and just go with the Seagate 72.10... thoughts?

78MB/s: Raptor 150GB, 10,000 RPM, 16MB Cache, $195
65MB/s: Barracuda 320GB, 7200 RPM, 16MB Cache, $80

Less than half the price, double the capacity, yet only ~13MB/s slower... if you have money to burn, go ahead. If you'd rather spend that money on something else, go ahead.
 
Back
Top