1300$ config, thoughts and suggestions please :)

ManyCowsMoo

Limp Gawd
Joined
Aug 3, 2005
Messages
348
CPU: Intel Core 2 Duo E6600 Conroe 2.4GHz LGA 775 Processor Model BX80557E6600 - Retail – $222.90

GPU: EVGA 320-P2-N815-AR GeForce 8800GTS 320MB GDDR3 PCI Express x16 HDCP Video Card - Retail – $286.99

HDD: Seagate Barracuda 7200.10 ST3500630AS 500GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM – $119.99

RAM:
---------------------
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model TWIN2X2048-8500C5 - Retail – $174.00
or
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400PHU2-2GBHZ - Retail – $129.99
--------------------

CD/DVD Burner: SAMSUNG 18X DVD±R DVD Burner With 12X DVD-RAM Write, LightScribe Technology Black SATA Model SH-S183L - OEM – $36.99

Mobo: ???
Case: ???
PSU: ???
CPU HSF: ???

Total: $796.86+ or $840.87+

My budget is $1300 without shipping and I'm going to wait until at least the 22nd for the price drops.

I heard that the new c2ds are very good overclockers and that's what I'd like to do. Will 1066 ram be overkill or will 800 be enough? My res is 1600x1200 so I think the 8800GTS 320mb should be enough, but perhaps I should get 8800GTS 640mb?

I'd like a good mobo for OCing and I'm not going to use SLi. Any suggestions? Also, I'm not sure how many watts I'm going to need for the PSU. As for the case, I've looked through a lot but I just can't make up my mind. What I really need is 150$ or under, attractive but not overly flashy, and not loud. I go to LAN parties often so it'd be nice if the case was light, but its not necessary.

I read that along with the price cuts, Intel is going to release a new family of dual cores so do you think I should go along or one of those or maybe even a quad core?

This computer is going to be used primarily for gaming. No OS is necessary because I already a copy of XP that I can use. Feedback, comments, and suggestions are appreciated :)
 
Thermalright Ultra 120
Corsair 520w
8800gts 640.
Gigabyte DS3
Either the Q6600 or e6850 after July 22nd
 
definitely go with the 520w Corsair, as RoBo said. It will handle the 8800GTS perfectly. You should definitely go with the 640mb since you're going to be running at a high resolution (I assume you'll be gaming).

Go with the Corsair RAM. Not sure about the mobo, but definitely an ASUS or EVGA board. People keep suggesting that a P35 or G33 or maybe even the new X38 chipset for the new c2d's and overclocking.

Personally, I'd go with the E6850 rather than the Q6600. Benchmarks show it performs as well as or better than the Q6600 in many situations. Higher FSB, clock speed, and multiplier on the E6850.

As for the case, it really comes down to personal preference. Just make sure it has plenty of fans/good airflow and it's fairly spacious inside. If you want to find out how reliable it is, read the reviews on newegg or other sites. If it has a lot of good reviews, then go straight to the bad ones and read what people say are the cons of the case. Let that be your deciding factor if it comes down to a few choices for cases.

Funny because your build is basically exactly the same as my build, minus the case and mobo.
 
Could get this Silverstone Strider 560 watt for $85.

Gigabyte or Abit P35 board.

Case: Whatever. If it has 2+ 120mm fans it should be fine. Grab an Antec P180/P180B if you can find it for $100 or less.

Video: the 640MB 8800 GTS or even a GTX if budget will allow.

RAM is way more expensive now... look around places other than Newegg and see if you can find it cheaper.
 
q6600 after price drop- $300
4gb of quality ram- $200
evga 8800gts 640mb- $330 on sale
Tower- $100
Tuniqtower, thermaltake, etc. cooler- $50
500gbhd- $100
vista 64bit oem- $125
Optical drives- $50
Unforceen costs- $50 (trust me you will have some)
Asus p5k deluxe or x38- $225-250

Total= $1500, you could get a lesser mobo, a cheaper cpu (dual core), 2gb of ram, and windows xp. You'd than be looking at $1100-1300
 
q6600 after price drop- $300
4gb of quality ram- $200
evga 8800gts 640mb- $330 on sale
Tower- $100
Tuniqtower, thermaltake, etc. cooler- $50
500gbhd- $100
vista 64bit oem- $125
Optical drives- $50
Unforceen costs- $50 (trust me you will have some)
Asus p5k deluxe or x38- $225-250

Total= $1500, you could get a lesser mobo, a cheaper cpu (dual core), 2gb of ram, and windows xp. You'd than be looking at $1100-1300

No reason for most to get the P5K Deluxe, as they won't use the extra stuff. A P35-DS3R or similar works just as well and costs nearly half as much.

Opticals cost more like $30-40 anymore, though I'll admit the difference is minimal.

I seriously doubt there will be "unforseen costs". I haven't run in to any with my builds.

2GB of RAM is enough for the moment especially if you're on a budget, so 4GB should probably be the last thing to add if budget isn't as tight as expected.

By Thermaltake I hope you meant Thermalright? Although Thermaltake isn't as bad as they once were. (and occasionally you get lucky -- my SilentWater has yet to self-destruct.)

Everything else is reasonable. I think the OP would be much better served putting that $200 or so in to a faster GPU, as that CPU is plenty fast.
 
CPU: Intel Core 2 Duo E6600 Conroe 2.4GHz LGA 775 Processor Model BX80557E6600 - Retail – $222.90

GPU: EVGA 640-P2-N821-AR GeForce 8800GTS 640MB GDDR3 PCI Express x16 HDCP Video Card - Retail – $379.99

HDD: Seagate Barracuda 7200.10 ST3500630AS 500GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM – $119.99

RAM:
---------------------
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model TWIN2X2048-8500C5 - Retail – $174.00
or
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400PHU2-2GBHZ - Retail – $129.99
--------------------

CD/DVD Burner: SAMSUNG 18X DVD±R DVD Burner With 12X DVD-RAM Write, LightScribe Technology Black SATA Model SH-S183L - OEM – $36.99

Mobo: GIGABYTE
GIGABYTE GA-P35-DS3R LGA 775 Intel P35 ATX Intel Motherboard - Retail
- $129.99

Case: Antec Performance One P180B Black 0.8mm cold rolled steel for durability through the majority of chassis 1.0mm cold rolled steel around the 4 x HDD area ATX Mid Tower Computer Case - Retail - $129.99

PSU: CORSAIR CMPSU-520HX ATX12V v2.2 and EPS12V 2.91 520W Power Supply - Retail - $124.99

CPU HSF: ??? - $50~

Total: $1324.83~ or $1368.84~

Think the mobo I picked out is fine? It looks like a lot of the coolers are going to be really close to the edge of the case; Will it be a problem if the cooler is like 1cm away from the side of the case? As for the ram, do you guys think that 1066 is overkill? Are most people able to get above 400 fsb on decent air cooling?
 

Go with the Corsair RAM.

I must disagree. The G.Skill is a much better set of ram, and costs a lot less (Holy crap that XMS kit is expensive! WTF?!?!). Why are the HZ sticks better than the XMS2? Because you can OC them to DDR2-1066 speeds if need be, since it uses Micron chips. You could also lower the timings if you're not OC'ing, which is pretty good for a cheaper set of sticks.

DDR2-1066 is overkill if you have a CPU with a very low multiplier (eg. E6300). Such high speed ram isn't worth it if you have to pay a price premium. If you're going with the E6600/E6850/Q6600, then theres no real need for OC'able ram, nor super high speed ram. Just stick with a cheap kit of DDR2-800, preferably with 4-4-4-12 timings, but again, don't pay a price premium for tighter timing. 2GB should run you around $85 still (Patriot LLK).

E6600: 9 * 266 = 2.4Ghz, DDR2-533 << STOCK speeds
E6600: 9 * 333 = 3.0Ghz, DDR2-667 << simple OC
E6600: 9 * 400 = 3.6Ghz, DDR2-800 << near max OC on good air cooling

I agree with s-c, go with Scythe Ninja Plus Rev.B (SCNJ-1100P), Tuniq Tower 120, or Thermalright Ultra 120 (Extreme).
 
Not the gigabyte DS3... anything but the DS3.

Unfortunately, there are several "DS3" boards out there, so you'll have to be more specific.

In any case, I'm guessing you mean the GA-965P-DS3, since thats the one that so many people had problems with. What you also have to realize is, thats the board that SOOOO many people bought. I've built over a dozen systems with the DS3, and none have given me any problems whatsoever. However, I do have a friend who's having a hell of a time getting a stable system, at stock speeds, using the said board. With that said, none of that really matters, since he's choosing the GA-P35-DS3R, which has a much more reliable chipset.
 
Thermalright Ultra 120 Extreme or Tuniq Tower
Q6600
EVGA 8800GTS 640MB (1600 is a bit of a risk. It is 50/50 on whether 320mb is enough)
Corsair PSU.
GSkill ram, they all use Micron.
 
CPU: Intel Core 2 Duo E6600 2.4GHz – $222.90

GPU: EVGA GeForce 8800GTS 640MB – $379.99

HDD: Seagate Barracuda 7200.10 500GB SATA – $119.99

RAM: G.SKILL 2GB (2 x 1GB) DDR2 800 – $129.99

CD/DVD Burner: SAMSUNG 18X DVD±R DVD Burner SATA – $36.99

Mobo: GIGABYTE GA-P35-DS3R Intel P35 ATX - $129.99

Case: COOLER MASTER Centurion 532 - $54.99

PSU: CORSAIR CMPSU-520HX 520W - $124.99

CPU HSF: Thermalright Ultra-120 Extreme - $64.99

Total: $1264.82

I changed the case, hsf, and picked the 800 ram. I want to get some yate loon fans and I'm pretty concerned about noise so should I get the high, medium, or low speed ones? For thermal paste should I just get regular old Arctic Silver 5 or would you guys recommend something else?

Thanks for all the help so far :D
 
Shin Etsu X23. Supposedly the best stuff there is period. I've seen reviews with it dropping 4C or more vs. AS5. It's like $10-12 for one ounce, though, which is kinda crazy, but it's not as if you need much. Probably good for several applications if you 'do it right'.

I'd get the medium speed Yate Loons. They aren't very loud at 28dB, and if you decide that's too much you can always get a cheap fan controller later. I think my rheobus cost like... $15 shipped or something. That said, I've not used it at all -- all the knobs are just turned to full all the time anyway. Granted, the P180B is somewhat soundproofed, probably better than the Centurion.
 
Well, I heard from somewhere that they all used Micron chips, I can't confirm that myself.
 
CPU: Intel Core 2 Duo E6750 2.66GHz 4MB – $194.00

GPU: EVGA GeForce 8800GTS 640MB – $379.99

HDD: Seagate Barracuda 7200.10 500GB SATA – $119.99

RAM: G.SKILL 2GB (2 x 1GB) DDR2 800 – $129.99

CD/DVD Burner: SAMSUNG 18X DVD±R DVD Burner SATA – $36.99

Mobo: GIGABYTE GA-P35-DS3R Intel P35 ATX - $129.99

Case: COOLER MASTER Centurion 532 - $54.99

PSU: CORSAIR CMPSU-520HX 520W - $124.99

CPU HSF: Thermalright Ultra-120 Extreme - $64.99

Thermal Paste: Arctic Silver 5 - $5.99

Fan: Scythe S-FLEX SFF21F 120mm - $19.99

Total: $1261.90

So this is the final list, hopefully! I just wanted to see if you guys have any final recommendations before I order tomorrow. I'm a bit concerned about the PSU though; I plan to upgrade to Phenom and the Geforce 9 series or maybe 10 series in the future do you think that 520W will be enough or should I get a beefier PSU? If so, any suggestions? Also, hows the noise level on the S-FLEX fan?
 
I highly suggest another motherboard.

Thats the GA-965P-DS3, and probably one of the bad ones, hehe. I've built over a dozen systems with that board and none have given me any problems. Then again, a homie of mine got one, and has had nothing but problems (he's on his 3rd board I belive), lol, using all quality parts, too. I don't know if you guys are missing something or not, but my guess is that you guys were unlucky with the CPU. Have you tried the CPU on another board? Personally, I love the DS3. It's OC'ing options are great, and its very affordable compared to the P5B Deluxe, one of its main competitors in the enthusiast market.

In any case, the P35 chipset is much better than the P965, so no need to worry.
 
After reading your thread I don't think your problem is the motherboard, but the processor itself or your PSU. Many many people have that motherboard, really like it, and have had great OC results.

both the PSU and CPU were replaced during that thread, neither were the problem. It was solved by replacing the board with a DFI infinity p965.
 
Back
Top