Old PC freezes, loses video... Please help!

orion23

Gawd
Joined
Jun 4, 2004
Messages
879
Hi!

Trying to fix and old PC with about 512MB of RAM.

I removed all PCI cards and the only card in use is an AGP 8MB VGA.

Windows XP Home Edition.

PC will work for a little while and then it will freeze. Sometimes it freezes @ the welcome screen, or the video signal goes missing

Other times, it will make a horrible noise (kind of like a modem dialing) and then it freezes or loses video signal.

I installed XP Pro to a different partition and the same problem is there.

Could this be the VGA?

PSU?

or something else?

Thank you in advance!
 
could it be the vga? I don't think so
could it be the psu? what do your voltages look like? use speedfan to check
something else? I'm betting power or memory. run memtest 86 for a while and report back.
 
It could be heat. What specs are you working with? PIII's shut off the clock when they overheated thus locking up the system.
 
This is an Athon XP setup. I removed the RAM and installed a new chip, so I doubt it could be the RAM. I thought about the PSU, but how can I test for that?

I thought about removing the CPU cooler, but really can't find a way to do it.

It has a small 70 or 80mm fan on top of it that needs to be unscrewed, then there is some sort of a clip, but don't know what to do really...
 
Bios option for video is under AGP video with 32MB aperture size.

(What is the PCI latency setting for) 32 64 128.....?

I tried a new video card today and the same thing happened.

Tried a new PSU with the same results.

Tried a new HD and still, same issue!

Removed CPU cooler, cleaned it and applied new thermal paste. Same issue!

Thank you all for your help!
 
Bios option for video is under AGP video with 32MB aperture size.

(What is the PCI latency setting for) 32 64 128.....?

I tried a new video card today and the same thing happened.

Tried a new PSU with the same results.

Tried a new HD and still, same issue!

Removed CPU cooler, cleaned it and applied new thermal paste. Same issue!

Thank you all for your help!

You've eliminated everything except for the motherboard. and any Optical drives.

Have you removed everything except for one Hard drve, one stick of RAM, the video card, and the CPU? and it still lock up?
 
Yeah, I actually removed the damn floppy drive, along with both CD-ROMs.

This one really has taken everything I have...
 
Yeah, I actually removed the damn floppy drive, along with both CD-ROMs.

This one really taken everything I have...

Well if you've taken everything out but the barest essentials to boot with and replaced everything but the motherboard, I'd say it's more than conceiveable that it's your motherboard causing all your strife :D.
 
Back
Top