New rig around $3-4k

jchahn

Limp Gawd
Joined
Jul 20, 2004
Messages
183
You can see my current rig in my sig (as you can see, it's starting to show it's age) and it's about time for a new build.

I made a spreadsheet (google docs is neat) containing my tentative new rig:

*********** Updated 07/16/07 12:18PM ***********

Updated based on your suggestions: (680i board with 2 8800gtx SLI)

Case LIAN LI PC-V1200Bplus II 229.99
PSU Antec TPQ-850 ATX12V / EPS12V 850W 234
CPU Intel Core 2 Extreme QX6700 530
RAM mushkin 4GB(2 x 2GB) 5-4-4-12 314.99
GPU1 EVGA 768-P2-N831-AR GeForce 8800GTX 539.99
GPU2 EVGA 768-P2-N831-AR GeForce 8800GTX 539.99 *optional
MB EVGA 122-CK-NF68-A1 219.99
Optical1 Pioneer Black 18X SATA 33.99
Optical2 Pioneer Black 18X SATA 33.99
HDD1 Seagate Barracuda 7200.10 (Perpendicular Recording) ST3500630AS 500GB 129.99
HDD2 Seagate Barracuda 7200.10 (Perpendicular Recording) ST3500630AS 500GB 129.99
Monitor UltraSharp 2407WFP-HC 679 *optional

TOTAL w/out 2nd GPU and Monitor 2396.92
w/out 2nd GPU 3075.92
w/out Monitor 2936.91
everything 3581.92



Alternate: (P35 board with 1 8800ultra)

Case LIAN LI PC-V1200Bplus II 229.99
PSU Antec TPQ-850 ATX12V / EPS12V 850W 234
CPU Intel Core 2 Extreme QX6700 530
RAM mushkin 4GB(2 x 2GB) 5-4-4-12 314.99
GPU1 EVGA 768-P2-N881-AR GeForce 8800Ultra 629.99
MB ASUS P5K DELUXE/WIFI-AP LGA 775 214.99
Optical1 Pioneer Black 18X SATA 33.99
Optical2 Pioneer Black 18X SATA 33.99
HDD1 Seagate Barracuda 7200.10 (Perpendicular Recording) ST3500630AS 500GB 129.99
HDD2 Seagate Barracuda 7200.10 (Perpendicular Recording) ST3500630AS 500GB 129.99

TOTAL w/ p35 board and single 8800ultra 2481.92


Well, I did some research and discovered that SLI doesn't work with multiple displays. With the newer drivers you can now set it so that when you play a DX9 or DX10 game it automatically switches to SLI mode (meaning all but one monitor switches off), and then when you aren't playing a game it turns off SLI mode and both monitors come back on. Not a HUGE deal, but still kinda shitty. What I'd like to know is, if you ALT-TAB out of a game, do you get both monitors back and then once you ALT-TAB back into the game, the second monitor turns off? Or does the second monitor stay off until you actually close the game? One thing that sucks about it is that there are a certain select few games that support multi-display (like Serious Sam, the main game is on one monitor and details about items you pick up are on the other, also alot of flight sims and a few MMOs and other shooters support multi-display mode).. so if you have SLI and 2 displays and you want to play a game that supports multi-displays, you have to pick. No multi-display and SLI, or multi-display and no-SLI, and that sucks. If you fork over the extra cash to make an SLI rig, you shouldn't be forced to compromise. You should be paying enough that you don't have to. Just MHO.

In any case, here's what I'm tossing around for ideas:
Go with a P35, single GPU rig. I'm assuming that there won't be any games that an 8800ultra won't be able to run comfortably at 1920x1200 for the foreseeable future and that it will have no problems running 2 displays at 1920x1200 in 2d mode. The way I see it, by the time games start coming out that give the 8800ultra a run for it's money (to the point where games aren't playable) the gpu makers will be 2 or 3 generations ahead of where they are now and there will probably be cards out that will blow away 2 8800ultras SLI.

The overall point that I'm getting at is, rather than building a rig with the intention of possibly going SLI at some point, I should either go SLI right from the start, or not at all. The reason is because if you build a rig with the ability to upgrade to SLI at some point, more than likely by the time games start coming out that give your current card a hard time, they will have cards out that will blow away 2 of that card in SLI, and at that point it won't make sense to go SLI.

If I was running a 30inch monitor at 2560x1800 (or whatever it is exactly) then I would see the need to go SLI immediately. But I don't think 1920x1200 is to much for 1 card.

Does what I'm saying seem reasonable or logical at all, or am I not thinking about this correctly?

Also, is it worth it to pay the extra for the factory OC cards, or should I just get the base level 8800ultra that I listed above and OC it myself if need be?

***********************************************************

Any suggestions, recommendations. comments, etc about my tentative system are much appreciated.

Thanks in advance for the input,
John
 
Drop the dominators. Get a cheaper 2x2GB kit of ram instead. Look for some DDR2-800 at 5-5-5-15 timings.

Don't bother with the Ultra. Go for a GTX instead, unless the price difference between the two isn't much. With a 24" LCD, SLI would be a great option for you. Go with the evga 680i SLI A1 board and a single GTX for now. If gaming isn't good enough for you on that, pickup another GTX.
 
How about this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820220227
for the ram and
2 of these bad boys
http://www.newegg.com/Product/Product.aspx?Item=N82E16814127281

So is the evga board suppose to be better than the asus board?

Actually, now that I look, the MSI ultra card is $580 on newegg after a rebate and the GTX card is $500.. at $80 difference I'll just go with the ultra. Back when the ultras were 2x the price they weren't worth it, but now it's not such a bad deal anymore. I'll get 1 ultra and if I need more I'll pick up another one in a few months.

I'm still intrigued by the evga mb though...
 
Xtreme edition chips are more or less wasted cash considering how easily C2D's and C2Q's OC (though the quads don't OC nearly as well as the duals)

Go eVGA rather than MSI on the graphics cards due to warranty and customer service reasons. Dual "vanilla" GTX's should treat you very well. I'd suggest an eVGA 122-CK-NF68-A1 over the ASUS motherboard, as well, same reasons as the graphics cards.

A few 500GB Seagate Barracuda 7200.10's or Samsung Spinpoint drives would probably give you more space and more speed with the Western Digital drives.

In this price range why not dual DVDRWs?

As others have said, drop the Dominators for some low latency (Cas 4) DDR2-800.
 
Case Thermaltake Armor Series VA8003BWS 169.00
PSU CORSAIR CMPSU-620HX 620W Power Supply - Retail $169
CPU Intel Core 2 Extreme QX6700 530.00
RAM Crucial 2GB (2 x 1GB) DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail $125
GPU MSI NX8800Ultra-T2D768E-HD-OC 599.99
MB ASUS P5N32-E SLI 209.99
Optical1 Pioneer Black 18X DVD-RW SATA 33.99
Optical2 ASUS Black 16X DVD-ROM SATA 17.99
HDD1 Western Digital Caviar SE16 WD7500AAKS 199.99
HDD2 Western Digital Caviar SE16 WD7500AAKS 199.99
Western Digital Raptor WD1500ADFD 150GB 10,000 RPM Serial ATA150 Hard Drive - OEM $199
Western Digital Raptor WD1500ADFD 150GB 10,000 RPM Serial ATA150 Hard Drive - OEM $199
Monitor UltraS
harp 2407WFP-HC 679.00

$3328
chuck in a better case and possibly another 2g ram not that it will all show up and a quick flash drive if running vista
 
Thanks for the input everyone. Much appreciated. So, let me see if I get the general idea here.


  • Even though the eVGA stuff costs more than MSI, it's worth it. So go with eVGA.

    I am better off with a 2x2gb ram configuration at ddr800 than I am getting a 4x1gb ddr1066 configuration. So I should go get some decent ddr800 ram instead.

    I'm better off getting 2 vanilla gtx's instead of 1 ultra.

Some questions I have:

I noticed there was a recommendation for the 620w corsair PSU. Why? If I may want to either get SLI now or upgrade to SLI in the future, would I not be better off getting the 850w?

If you were picking from the following, what would you get?

2x750GB WD 7200 sata 3.0gb/s raid0
2x150GB Raptor sata raid0
3x500GB Seagate Barracuda 7200.10 raid0 or raid5?


Thanks again everyone.
 
I absolutely despise the Thermaltake Armor case and most Thermaltake cases for that matter. I don't know how anyone stands those rediculous flaps on the front of the cases that don't lock in place, and are absolutely useless. (Not to mention they can rattle and sometimes squeek when moved.)

Aside from that I do have some suggestions. Having worked with every 680i SLI chipset based board on the market I can safely say the P5N32-E SLI is one of the worst based on that chipset. The EVGA 680i SLI is FAR superior in terms of reliability and it's a better overclocker to boot. Not to mention it should be cheaper too if you shop around. ASUS still makes good boards, but honestly their 680i SLI boards just aren't that good. I'd take any other brand and model over the two ASUS models if that tells you anything. (I own a Striker Extreme and don't use it in my main rig if that tells you anything.)

Also, you need to look at Microcenter for the Raptors. I bought all four of mine for $169.99 on sale in the store with no rebates. $199.99 is too much for them in my opinion. I think the instore regular price is typically $179.99 or something like that. Those are the versions without the windows in them. I also second the idea of going with the EVGA 8800Ultra instead of the MSI for all the reasons everyone else mentioned.
 
You got the general idea exactly right.

I'd go with the 3 Seagates, as they're fast and /fairly/ quiet, given those three options... but given the last few reviews I've seen the newest revision Samsung Spinpoint drives may actually be a better option if you want to keep things quiet, though the Seagates are a little faster. Not familiar with benchmarks on the WD drives, but given the number of WD drives I've had die, I wouldn't get them, personally.

Raptors are faster, sure, but not enough that it matters (in my opinion). The price premium is insane. You'd miss the space if you went with 2 150GB drives. If you /must/ have a Raptor, do what most do -- get one, put the OS on it and nothing else. RAID is more trouble than it's worth.

The Corsair PSU is nice, sure, but going with dual cards you'd be better off buying something a bit higher rated like an 850 watt Toughpower or my PSU, a PC Power and Cooling Silencer 750 Quad. Something with 4 native PCIe power connectors to support 2 high-end cards.
 
I absolutely despise the Thermaltake Armor case and most Thermaltake cases for that matter. I don't know how anyone stands those rediculous flaps on the front of the cases that don't lock in place, and are absolutely useless. (Not to mention they can rattle and sometimes squeek when moved.)

Aside from that I do have some suggestions. Having worked with every 680i SLI chipset based board on the market I can safely say the P5N32-E SLI is one of the worst based on that chipset. The EVGA 680i SLI is FAR superior in terms of reliability and it's a better overclocker to boot. Not to mention it should be cheaper too if you shop around. ASUS still makes good boards, but honestly their 680i SLI boards just aren't that good. I'd take any other brand and model over the two ASUS models if that tells you anything. (I own a Striker Extreme and don't use it in my main rig if that tells you anything.)

Also, you need to look at Microcenter for the Raptors. I bought all four of mine for $169.99 on sale in the store with no rebates. $199.99 is too much for them in my opinion. I think the instore regular price is typically $179.99 or something like that. Those are the versions without the windows in them. I also second the idea of going with the EVGA 8800Ultra instead of the MSI for all the reasons everyone else mentioned.

Thanks for the suggestions. In response to the first part, I'm not dead set on the thermaltake, I just like the 240mm window fan, especially if I go with SLI now or in the future.

In any case, do you have any cases you'd recommend?
 
Raptors are faster, sure, but not enough that it matters (in my opinion). The price premium is insane. You'd miss the space if you went with 2 150GB drives. If you /must/ have a Raptor, do what most do -- get one, put the OS on it and nothing else. RAID is more trouble than it's worth.
.

RAID done right isn't more trouble than it's worth. It's just a matter of setting reasonable goals and doing things the smart way.
 
Just bumping to let everyone know I have updated my orignal post to reflect some of your suggestions, let me know what you think.

Thaks again,
John
 
The amount of air the 25CM fan on the armor moves is pretty......disappointing for a 25CM fan. :(

I'd say the Armor is an extremely soild case though, with more than enough room to pretty much fit anything you want in it. The only real problem I have with it is the fact some moron decided to stick the external drive bay by the PSU mount, meaning a very large PSU won't fit in the case. The 850W ToughPower will still fit though =)
 
The CM Stacker 830 or 832 can hold 4x120mm fans on the side. Yate loon fans are less than $5 a piece.
 
The CM Stacker 830 or 832 can hold 4x120mm fans on the side. Yate loon fans are less than $5 a piece.

The 830 is a no go. No power supply over 7 inches will fit inside it without modification to the case. Even 7" PSUs will only just fit. The bracket won't even mount flush on the back of the case. I know this from experience. The Stacker 832 eliminates this problem but there is an additional problems with it. They don't cool nearly as well as you might think, they are very noisy, and they are extremely cramped inside despite their immense size. I've had a Stacker 830 and in almost every way it's inferior to the Stacker STC-T01. (Though I like the asthetics of the 830 a little better.)

For a case I'd go with the Silverstone TJ-09 or the Antec P182. The latter will actually do a better job with cooling an SLI setup than you would imagine. You do have to leave the plastic wire management sliding thing open all the way to allow enough air to get into the bottom 8800, but other than that it works fine. I actually got better temperatures in my P182 than I did in my Stacker 830.
 
PSU Antec TPQ-850 ATX12V / EPS12V 850W $234

I think the ST85ZF is of higher quality than the Antec Trio, though I havent read up on that particular Trio.

You're thinking is on track, that you don't really need SLI with a 24" LCD. However, I think it all depends on you. I still think SLI should be left open as an option, which it won't be if you go with a P35 board.

"But I don't think 1920x1200 is to much for 1 card."

I'm almost certain it will be in 2-3 months.

I think it'll take a bit longer than 2-3 months.

Oh, and jchahn, your sig is too long.
 
I think it'll take a bit longer than 2-3 months.

Look at performance in Supreme Commander, STALKER, Call of Juarez, Lost Planet, Dirt, etc. If the trend continues, Crysis and the next batch will bring even an Ultra to its knees at that res. I'm worried about my machine, and I built 2 months ago...
 
I think I will take the previous advice and go with the 680i board and 1 8800ultra. I will get the rig w/out the extra monitor for now. Then in a couple of months I'll see where I'm at. If I crave more performance I'll get the extra card and run SLI and get an 2nd monitor at some point as well.

So, at this point I'm looking at about $2500 give or take a couple Benjamin's. Then I'm looking at another $1200 at some point when/if I get a 2nd GPU and monitor.

I looked at that Silverstone PSU that you recommended. Seems pretty nice, I just wish it had modular connections. Alteast it has braided cables. I get the feeling the thermaltake PSU's (like I orignal had in the config) are not very highly recommended, so at this point I'm debated between the Enermax, Antec, Power PC and Cooling, and Silverstone. The PPC&C is only 750w, but I hear those are nice units and I should be able to run 2 8800s with one no problem.

I noticed that the chip that will be $530 on the 22nd is going to be a new chip, the q6700, not the current extreme chip the qx6700. Any significant different between the two? Also, no one recommended that I save $250 and get a q6600 instead of the q6700. Can I assume that the general consensus is that the q6700 is better enough to justify the extra money if you can afford it, or would I, in fact, be better off getting the q6600 at $266?

Thanks again for the advice everyone.
 
I'd personally save the cash and get a Q6600. No quad will OC all that high, so an unlocked multiplier (extreme edition chip) doesn't matter all that much. They just get too hot, too fast. Unless you're running high-end watercooling or even phase-change like a Vapochill rig, it isn't likely to ever become a factor.

I'd personally avoid Antec PSUs, as I've had nothing but bad experiences in the past over the course of several generations. That said, I think the Trio reviewed well at JonnyGuru, so maybe there's some hope for it. Still a lot of better options out there.

Yes, the PC Power and Cooling Silencer 750 Quad will handle SLI'd 8800GTX's or Ultras and a quad core without issue. It has a single 60 amp 12v rail. Enermax and Silverstone are also good options. Etasis and Seasonic also make good PSUs. Someone will almost certainly recommend the Corsair 620HX at some point, but I'd look for something just a little higher end if you think you'll go SLI at some point -- something with 4 native PCIe power connectors to support the Ultras.
 
I'd personally save the cash and get a Q6600. No quad will OC all that high, so an unlocked multiplier (extreme edition chip) doesn't matter all that much. They just get too hot, too fast. Unless you're running high-end watercooling or even phase-change like a Vapochill rig, it isn't likely to ever become a factor.

Agreed. I can't really do more than 3.4GHz before the system starts acting up and my water cooling setup is decent. (Not necessarily top end, but decent.)

I'd personally avoid Antec PSUs, as I've had nothing but bad experiences in the past over the course of several generations. That said, I think the Trio reviewed well at JonnyGuru, so maybe there's some hope for it. Still a lot of better options out there.

Antec PSUs were the ones to have back in the Pentium III days and I used them nearly exclusively until about the time the Neo Power 480 came out. After killing a few of those I switched to an Enermax, killed that and went back to an Antec Neo HE 550 and it's still working in one of my machines today. That PSU wasn't big enough for my main gaming rig, so I went to the PC Power & Cooling Silencer 750 and never looked back. I was in need of a new PSU and bought the ToughPower 1200, and retired my PC Power & Cooling unit to my server. All three of my PSUs that are in service right now are working flawlessly.

Yes, the PC Power and Cooling Silencer 750 Quad will handle SLI'd 8800GTX's or Ultras and a quad core without issue. It has a single 60 amp 12v rail. Enermax and Silverstone are also good options. Etasis and Seasonic also make good PSUs. Someone will almost certainly recommend the Corsair 620HX at some point, but I'd look for something just a little higher end if you think you'll go SLI at some point -- something with 4 native PCIe power connectors to support the Ultras.

It absolutely will. Aside from the water pump the PC Power & Cooling Silencer 750 (Which is older and probably not quite as good as the newer "Quad" version ran the system in my sig just fine for several months.
 
I agree on the QX6700 being a waste of money. Unless you're investing in an exotic phase-change cooler, you won't be able to OC a quad to a point where the unlocked multiplier plays a benefit. The Q6600 is the price/performance sweat spot, especially after July 22.

Mark.
 
The 750W Zeus is also 8800GTX SLI certified, but I bumped the recommendation up to the 850W because of your CPU choice.

Unfortunately, most high end units aren't modular.

I agree on the Q6600 as well.
 
It absolutely will. Aside from the water pump the PC Power & Cooling Silencer 750 (Which is older and probably not quite as good as the newer "Quad" version ran the system in my sig just fine for several months.

How close do you think that rig came to maxing out your PSU? The reason I ask is because I'll be doing air cooling and using a quad core chip so my power consumption will probably be a bit higher than yours. Also, if I may ask, you say you bought the 1200w because you were "in need of a new PSU". Please eleborate.

I guess what I'm saying is that I would like to get a PSU where I have some breathing room. Down the road, I don't want to have to worry that if I buy a new harddrive or an extra case fan, or a bigger CPU fan that I may have to buy a new PSU while I'm at it. I'd go for the kW PCP&C but the price on newegg for one of those is like $530 and that's outrageously priced considering what the competition is charging.
 
How close do you think that rig came to maxing out your PSU? The reason I ask is because I'll be doing air cooling and using a quad core chip so my power consumption will probably be a bit higher than yours. Also, if I may ask, you say you bought the 1200w because you were "in need of a new PSU". Please eleborate.

I guess what I'm saying is that I would like to get a PSU where I have some breathing room. Down the road, I don't want to have to worry that if I buy a new harddrive or an extra case fan, or a bigger CPU fan that I may have to buy a new PSU while I'm at it. I'd go for the kW PCP&C but the price on newegg for one of those is like $530 and that's outrageously priced considering what the competition is charging.

I can give you nearly exact figures. Idle my system draws 468watts of power and under full load (All four cores, and the video cards being taxed, with drive benchmarking going) it comes out to 580-595watts. I say exact, these are measured by the UPS's hardware and therefore probably aren't as accurate as a Kilawatt device but they are probably good ballpark figures for others to get an idea of what power consumption is like on a higher end machine.

I was in need of a new PSU because I was building a third machine and decided to move my PC Power & Cooling Silencer 750 into another machine and get a new one for myself. I have 8pin molex connectors four six pin connectors and more power than I should ever need until the PC power specifcations change significantly again. I bought this PSU because it was just about the best one you could buy at the time. (I think it still very nearly is) and for no other reason.
 
I can give you nearly exact figures. Idle my system draws 468watts of power and under full load (All four cores, and the video cards being taxed, with drive benchmarking going) it comes out to 580-595watts. I say exact, these are measured by the UPS's hardware and therefore probably aren't as accurate as a Kilawatt device but they are probably good ballpark figures for others to get an idea of what power consumption is like on a higher end machine.

I was in need of a new PSU because I was building a third machine and decided to move my PC Power & Cooling Silencer 750 into another machine and get a new one for myself. I have 8pin molex connectors four six pin connectors and more power than I should ever need until the PC power specifcations change significantly again. I bought this PSU because it was just about the best one you could buy at the time. (I think it still very nearly is) and for no other reason.

Wow, so with a quad core and 8800 sli setup and full load it only comes to 600w. So I guess the only reason they are making 1200w+ PSU units is because they will run cooler. (They will only be using half of their load capacity even with SLI).

Have you by chance used the seagate 7200.10 drives at all? I see you have raptor's and I was just wonder how they compare speed wise. I know the raptor's are better, but I'm just wondering if they are better *enough* to justify the price.

Keep in mind, I have a 1TB external seagate firewire drive, so I've got plenty of storage. I just figured if the newer Sata drives performed well enough I would go ahead and get another terrabyte or more instead of the smaller raptor drives, but I'm not starved for storage space by any means.

I have an older raptor 74gb in my machine right now, so I've gotten used to that kind of performance. Since I've gotten used to that kind of performance I keep thinking I may be better of getting a couple of 150gb raptors in raid0 and continuing to use my external drive for storage like I have been.
 
i wouldnt get an 8800 SLI setup, i would get 1 8800GTX and then svae the money from the other one, then when the 9 series comes out, buy that with the extra money and sell the 8800GTX
 
Wow, so with a quad core and 8800 sli setup and full load it only comes to 600w. So I guess the only reason they are making 1200w+ PSU units is because they will run cooler. (They will only be using half of their load capacity even with SLI).

You never want to use more than 75% of your total PSU output and you might upgrade in the future therefore justifiying double your actual consumption. :p

Have you by chance used the seagate 7200.10 drives at all? I see you have raptor's and I was just wonder how they compare speed wise. I know the raptor's are better, but I'm just wondering if they are better *enough* to justify the price.

Well I personally don't like them much (price per GB) but with a $3.5k Rig it perhaps would be foolish not to get the best drive available.


I have an older raptor 74gb in my machine right now, so I've gotten used to that kind of performance. Since I've gotten used to that kind of performance I keep thinking I may be better of getting a couple of 150gb raptors in raid0 and continuing to use my external drive for storage like I have been.

Personally, RAID 1 is a no go.
 
i wouldnt get an 8800 SLI setup, i would get 1 8800GTX and then svae the money from the other one, then when the 9 series comes out, buy that with the extra money and sell the 8800GTX

In the technology realm, there's always something better on the horizon. If you always wait for what's coming a year from now, you'll never get anything.
 
If you game at a resolution (1920x1200 or greater) such that SLI is beneficial, and if you have the cash for it, then by all means go 8800 GTX SLI--In this case, it's worth it. Of course, in the end, going with one card is easier and cheaper if you want to continuously upgrade to the latest and greatest. However, nVidia has said almost nothing about the G92, and we certainly don't know how much of a performance increase it will bring over the top of the line 8800. Everything right now is speculation.

What we do know is that the 8800 GTX/GTS series is a revolutionary release, and is still 10 months after launch the best thing out there. If you want the best in graphics performance now, SLI is the way to go, and assuming you have the monitor resolution to take advantage of it, it'll provide much more of a realized benefit than other super high-end buys, like a Core 2 Extreme chip or a complex water/phase cooling setup allowing you to OC beyond mainstream highs.

Mark.
 
Well, I don't think it'll matter that much. 9×400 = 3600, which seems quite far for a quad as it is. Personally, I'd grab whatever is cheap but from a good company still ( gotta love those warranties and support )
 
Well, I don't think it'll matter that much. 9×400 = 3600, which seems quite far for a quad as it is. Personally, I'd grab whatever is cheap but from a good company still ( gotta love those warranties and support )

Oh, I see what your saying. I forgot that the stock fsb for quads is 266mhz. 400mhz is already overclocked. I've been out of the game for a couple of years now, and this will actually be my first Intel chip, so a little n00bness is acceptable :p
 
Wow, so with a quad core and 8800 sli setup and full load it only comes to 600w. So I guess the only reason they are making 1200w+ PSU units is because they will run cooler. (They will only be using half of their load capacity even with SLI).

Have you by chance used the seagate 7200.10 drives at all? I see you have raptor's and I was just wonder how they compare speed wise. I know the raptor's are better, but I'm just wondering if they are better *enough* to justify the price.

Keep in mind, I have a 1TB external seagate firewire drive, so I've got plenty of storage. I just figured if the newer Sata drives performed well enough I would go ahead and get another terrabyte or more instead of the smaller raptor drives, but I'm not starved for storage space by any means.

I have an older raptor 74gb in my machine right now, so I've gotten used to that kind of performance. Since I've gotten used to that kind of performance I keep thinking I may be better of getting a couple of 150gb raptors in raid0 and continuing to use my external drive for storage like I have been.

I have used the 7200.10's and really aside from Raptors they are the only choice for drives in my opinion right now. If you already have a TB of storage and don't need more I'd recommend the Raptors for you since you've already become used to the performance of the 74GB model.

The key is to shop around. I got mine for $169.99 each at Microcenter on sale. Normally they have them in the store for $179.99 or something like that. They are actually a little cheaper than I've usually seen them online. Of course these aren't the Raptors with the windows in them, but I didn't care about that.
 
My Raptor's avg transfer rate is 78MB/s. My 'cuda's avg transfer rate is 65MB/s. Just wanted to give you an idea of the speed difference. Also, the newer ADFD models are faster than the old GD models. Since you have alot of space already, I'd suggest the raptor since you seem like you have the cash for it. If you have too much cash, go for some SAS drives. :p

5-4-4-12 timings arn't bad at DDR2-800 speeds. Thats a lil better than avg, but you won't really notice dropping down to CL4 in normal everyday usage.
 
Does anyone know off hand if the Lian Li case I have picked out is wide enough for a Tuniq Tower 120? Also, will the Tuniq clear everything on the motherboard and still give m enough room for SLI if need be?

I really like the looks of the Lian Li cases (I've been wanting a Lian Li for years). I'm just wondering if that mid tower is big enough for everything I want or if I should forget the V1000 series and spring for a V2000 series instead. V2000 seems a bit much for me since I'm only going to have 2-4 HDDs tops and those big cases have racks for up to 15 or something like that. Seems like overkill for a non-server rig. I read that most of the V1000 series cases don't have room for larger PSUs, but the V1200 is arranged inside differently such that it will accomodate the larger PSUs. That's why I picked that one.

Thanks for the info.
 
The V1000 should be able to house the Thermalright Ultra 120 Extreme or the Tuniq Tower just fine.
 
Back
Top