Seeking Q6600 system build advice

simko1ra

Weaksauce
Joined
Mar 12, 2006
Messages
88
Hey guys, I am a long time reader but short time poster and I am looking for some advice on my new system. I have been reading multiple threads on my issues but most people have a different focus for their systems (Pure overclocking). Like most people, I am building a new system after the July 22nd price drops. I have already decided on the Q6600 for the sole reason of having a quad (I am well aware that I will not be utilizing all of the power and would be just as well off with a higher clocked duo). The purpose of this thread is to gather information about undecided features of my new system (Motherboard, CPU Cooling, and DVD-Burner). The #1 requirement for my computer is that is must be QUIET, overclockability is just an added bonus. If possible, I would like to be able to make my system near-silent when I go to bed but be able to turn the fans up when I play games.

My plan is currently as follows:
Processor: Q6600
Processor Cooling: Undecided (assume Freezer 7 pro)
Motherboard: Undecided
Power Supply: Corsair 620hx
GFX: NVidia 7800gt
RAM: Crucial ballistix tracer DDR2 1000 2x1gb
Case: Thermaltake Armor VA8003BWS
DVD-Burner: Undecided (Must be SATA)

-Motherboard-
I have been looking at the EVGA 122-CK-NF67-A1 LGA 775 NVIDIA nForce 680i LT SLI ATX Intel Motherboard - Retail from newegg since the price is good after-rebate however I am still open to the P35 boards. I don't know enough about the differences except for the DDR3 support in P35 which I have no intention of using. I would rather just upgrade the entire system down the line. Any suggestions are more than appreciated.

-Processor Cooling-
From the review I have read, the Freezer 7 pro is an excellent cooling solution while maintaining a quiet case. I will most likely purchase this cooler as soon as I find a good price on it. In the meantime, I am still researching better solutions (Tuniq tower, scythe ninja) but the other solutions appear to be more expensive and having a quite cooler is an important feature to me.

-DVD-Burner-
In the past, I have ALWAYS bout pioneer burners and have loved them. With my new system, I am requiring my burner to use a sata connection. When I look at reviews (from newegg) for the sata version of the pioneer burner, I see terrible reviews. Since I have no experience from any other brands, I would love to hear suggestions about a QUIET and reliable burner. Plus, it must be able to to burn backups (dvd, xbox360, ps3, wii). Please, leave discussion about the last sentence alone since this is not the purpose of the post.

-GFX-
As with most people, I expect to put in a 8800 GTS or GTX eventually but I will be delaying this purchase until a game comes out that will require the extra power. I see no point in spending money before I know 100% that crysis, alan wake, UT3, etc are on the store shelves. With my luck, the games would be delayed an the 8900 series will be released.

Thanks in advance for you help!
 
Motherboard: Abit IP35 (pro) or Asus P5K (Deluxe)

Cooler: Get something a bit beefier for the Q6600 because they get quite warm. If you want to overclock, look into a Tuniq Tower, Scythe Infinity, Zalman CNPS 9700 or the Thermalright Ultra Extreme.

Videocard: I don't know what you're thinking. I hope you don't actually plan on BUYING the 7800 card. You're severely putting brakes on your otherwise fast system with that (depending on your video resolution of course). I would at least go 7900 or 1950 or, even better, cheap 8800gts 320MB.

DVD Burner: Well, it's the same problem all over. The manufacturers want to sell faster and faster drives and with the speed comes the noise. Hoenstly, I'd get a Samsung SATA Burner (don't you dare to buy something IDE) and if it's too loud, use some software to make it spin slower.

Case, PSU and Case are all good choices i would say.
 
Motherboard: Are these boards much better than the current one I was thinking about? How so?

GFX - I already have the 7800gt that I am currently using. I will just be sticking it into the new system for the time being.

Cooler - I will look into those coolers, but how would you rate them based on noise and cost?

DVD Burner - Is there specific software to make the drive spin slower or does Nero have that capability? This one isn't as much of a big deal since the amount of time I actually use a burner is slim to none so the noise shouldn't be too much of an issue. I mostly want to find a reliable drive that has good reviews (unlike the pioneer)
 
GFX - I already have the 7800gt that I am currently using. I will just be sticking it into the new system for the time being.

If you have the budget then go for the 8800gts later on.

Cooler - I will look into those coolers, but how would you rate them based on noise and cost?

Well they should keep a OC'd Quad at good temps with the lowest fan speed when idling. Or you could upgrade to a better fan, like a Yate Loon.
 
Mobo - I say a P35 Chipset. The only reason you should get the 650i or 680i is if you will be using SLI. Looks like you're only using one gpu, so one of the P35 chipsets should set you good (I'm doing the same)

Cooling - Yate Loons or Scythe. (I would say Nexus, but isn't that made by Yate Loons?)
EDIT: Nevermind, just read something and Nexus isn't made by Yate (Unless that souce is incorrect) So I guess those three would be your best bet. Good luck!

DVD Burner - Samsung
 
simko1ra,

i recently purchased a q6600 and am very happy with the performance, you'll find that with a little research you will find severals apps and os's that utilize all four cores. I went with the "safe" choice and got the intel 975 bx2 ref board. As for the cooling i would HIGHLY recomment the
Zalman 9700 NT (aluminum with green led, i heard the copper version is very good too). My Zalman runs practically silent unless under full load and even then i have to put my ear to the case to hear it. Kudos on going with the quad


Keep it [H]
 
I hate the case, but that's just my opinion. Theres nothing wrong with it aside from those hideous and useless flaps.

Anyway the P35 chipset doesn't require DDR 3 as that's decided by the board and what physical slots it uses rather than by the chipset itself. The chipset supports either. If you aren't going to go with SLI then I'd say the P35 is the best choice for a motherboard chipset currently.

For the CPU cooler, the best choice for quad core is the Thermalright Ultra 120 Extreme or the Tuniq Tower. Why anyone mentions anything else I'll never know. Those processors get really hot and you need the best cooler for them in my opinion.
 
Everyone,

I appreciate all of the feedback. Since a few replies have mentioned it, currently I have no intention of going the SLI route since I would rather just buy a more up-to-date card than ever have to buy a second GPU. I looked into the ABIT IP35 and I love the reviews; I also previously had an abit motherboard and I grew fond of the uguru program. That specific motherboard commands around a $30 increase from the original evga I was considering, but I have a feeling I will stick with that anyway (thanks for the advice on it). As for the cpu cooler, my favorite so far has been the Tuniq Tower but it is a huge price increase over the freezer 7 pro. If anyone can find this cooler at a decent (or better than newegg) price, I will purchase this right away.

As usual, keep the suggestions rolling and I will update with my progress throughout the next week or so.

*Update*
I managed to pick up 4 of those 500gb Seagate SATA2 drives that were mis-marked at circuitcity today so I will be more than situated in that department.
 
I seriously doubt the Freezer 7 Pro will be enough for an even mildly overclocked quad core. The Tuniq costs more because it's literally that much better. The post 2 above by Dan is right on -- the quads just get too hot for the smaller cooler to handle.
 
I just finished building Q6600 system this past weekend, here's what I went with and why.

Board: GA-P35-DQ6
I've always purchased Asus but I really liked the features on this board and it got favorable reviews. In particular I like the placement of the SATA headers and single PATA connector, dual-bios, and the ability to store multiple cmos settings.

RAM: 4x1gig Crucial Ballistic Tracers 8500
Overkill for me but it was cheap. Originally I purchased this kit as an 'investment' to sell come fall once ram increases in price. This is what started my outlaying of cash, some investment indeed.

Case: Antec P180B
Used my existing. Has three 120mm 3 speed fans installed. When on low setting with case closed it's silent. Medium setting not annoying but heard. High setting annoying - I never run all on high. Top and back exhausts are set at low, they're the easiest to hear. Lower compartment, with 2x 150gig Raptors and PSU, I set high. It's a the best balance.

PSU: Seasonic M12-700
My existing Silverstone ST60F began to give me trouble, intermittent loss of power to DVD and one HD. Rather than risk frying some equipment I decided to pick up a PSU. But I was undecided between the Seasonic M12-700 and Corsair 620HX so I purchased the both. :D I can answer questions about either. Because of my case I decided dual fan on the M12 was better option. The 620HX will be quieter if/when the 2ndary fan in the M12 kicks in other wise they're the same. 620HX is cheaper.

HSF: Thermalright Ultra 120 Extreme
This was the hardest choice, and since I have no budget I picked up both this and the Tuniq Tower. I was worried the outrageous heatpipe setup on my board would be a problem - it wasn't, both fit. Also I picked up Scythe S-Flex fan, SFF21F (1600 rpm) for mounting on the TUE, speed controlled by board. According to SpeedFan 4.32 my idle temps are 28,29,24,24C - this agrees with BIOS. Ambient room temp is around 22-24C.

CPU: Q6600
Fry's made this decision for me. I simply couldn't resist the $299 deal. Matter of fact if it weren't for this deal I wouldn't have bought everything else (except for the ram 'investment').

Graphics: 7900GTX
Used existing. Once nVidia refreshes their top end I might pick it up assuming better codec acceleration, etc.

DVD burner:
I've been very happy with NEC but I'm not using their SATA models. Check CD Freaks for reviews on newer models. Their forums are a good resource as well.

Misc:
1sqft slab of flat polished black granite from HomeDepot $4!
$15 of sand paper :D
2hrs lapping CPU and HSF to a shiny copper finish.
 
Case: Antec P180B
Used my existing. Has three 120mm 3 speed fans installed. When on low setting with case closed it's silent. Medium setting not annoying but heard. High setting annoying - I never run all on high. Top and back exhausts are set at low, they're the easiest to hear. Lower compartment, with 2x 150gig Raptors and PSU, I set high. It's a the best balance.

Buy 3 or 4 Yate Loon 120mms for $4-5 a piece to replace the Antec TriCools and you'll be far happier with the air circulation and sound from that case. They push a lot of air quietly, and are dirt cheap.
 
How do the Yate Loon fans compare with the supplied ones from my Thermaltake Armor case? I suppose I should wait and see how loud the original fans are before making a decision, but spending an extra $20 or so to quiet down my fans seems like money well spent to me.
 
Ok so after some further research today I think I have decided on the CPU heatsink/fan combo:

Thermalright Ultra-120 Extreme CPU Heatsink
Scythe SFF21E
 
Buy 3 or 4 Yate Loon 120mms for $4-5 a piece to replace the Antec TriCools and you'll be far happier with the air circulation and sound from that case. They push a lot of air quietly, and are dirt cheap.

I did just that in my P180. The result is:

- The YL's @12v are 'slightly' louder overall (not annoyingly so) than all the tri-cools @ 5v (low).

- ...because, the YL's @12v are spinning faster than the tr-cools are and so they push more air.

- all of my temps dropped roughly ~2C (system, cpu, cores).
 
Quick question, I have a fan controller that I have never been able to use since my last case had a door that wouldn't shut with the controller in place. It has been a few years since I bought the fan controller; it uses a single molex connection to power it and each fan gets attached with a 3-pin plug. Will any fan model be able to connect to this controller or is it too old?
 
Quick question, I have a fan controller that I have never been able to use since my last case had a door that wouldn't shut with the controller in place. It has been a few years since I bought the fan controller; it uses a single molex connection to power it and each fan gets attached with a 3-pin plug. Will any fan model be able to connect to this controller or is it too old?

Yes, most fans should work.
 
Back
Top