another Rig problem..

rise2mcr

n00b
Joined
Apr 28, 2007
Messages
49
Hello all, im a new member here, so im sorry if im a little unsure about some stuff.. anyway. so i recently purchased and put together a new rig, and when i try to boot, theres no video. im thinking its one of my stupid mistakes, because its an SLI mobo, but theres only one card in it at the moment, and the chip that says "single card" or "double card" is in on single card.so my question is, what do you think the problem is? any help would be appreciated, and thank you for taking the time to read this. i can post the specs tomorrow, but right now, i am too tired to find the boxes for everything.
-Rise2mcr
 
Post your specs and we can help.

There are a lot of things that can cause problems like yours, and we need more information in order to help. Does it post? Beep? Fans spin up, are you getting any hdd activity? Things like that... give us more information and we can help.
 
Generally, the only way you are going to solve this is to swap parts out. The problem could be caused by many different parts.
 
I'm not trying to be rude at all...so don't take this that way....

Unless your filthy rich, swapping out parts is not the most cost effective way to troubleshoot a dead rig... Break it down, and start over. I have always built new machines out of the case, got to post, and loaded the os... and then tear it down, and install it in the case. This way, if you have a problem, you can easily troubleshoot that problem without working around the case. Put your mobo on a piece of cardboard, install the cpu/hsf, one stick of ram and your video card and get it to post, and build up from there.

Good Luck, and get us some more info....
 
Hello, and thank you all for your supportive comments and ideas. the motherboard is an ASUS P5N SLI, the RAM is Vdata DDR2 667, (2 1 GB sticks) the PSU is an OCZ powerstream
650 Watt, Pentium D CPU, and a stock Heat sink. Pioneer DVD drive, 250 GB (Seagate?) HDD. Antec 900 Case.
Thanks - Rise2mcr
 
Have you tried a bare bones setup as I suggested earlier?

If not, you need to.... it's the most effective way to trouble shoot your problems... I know it may seem like a pain in the ass but at the least you'll learn a lot in the process...
 
When you say try to boot do you mean try to boot into windows i.e. your able to see the BIOS options then when it goes to the Windows loading screen you loose picture?
 
When you say try to boot do you mean try to boot into windows i.e. your able to see the BIOS options then when it goes to the Windows loading screen you loose picture or is there nothing at all like the machine doesn't post?

I asked the op the same thing earlier and got no answer... therefore I'm going to stick my neck out here and ask... and take no offense.... .but op, do you know rather it's posting (or what posting is).... That is information we need in order to help, and without an answer..... well, any responses will be nothing more than a guess...
 
No POST, i cant see anything. sorry for the late responses, i will try to get a barebones setup going, thank you for the suggestions.
 
In my experience the two big reasons that a machine won't post are... bad ram or a dead mobo.. but that's just me, and based purely on my own, personal experience..
 
Hmmm.... well.. the mobo seems ok, because when i bought it it was returned, but it was "operational", the RAM, not too sure, i can try the other one, see if it boots with that?
 
That is the first thing you should do.. switch your sticks around, and then try one at a time, in different slots and see if you get anything..
 
i switched the sticks around, that didnt help either. whats the next step? Barebones?
 
Are you getting power to your parts ie is the fans going on everything including the video card and such? Also make sure that the hard drive is spinning when you check that. Then I'd say to go barebones......
 
i saw a build once that was doing this exact same thing
it turned out to be the 4pin power connector from the PSU wasnt pushed all the way down!
check that?
 
Ok. the 4pin is on all the way, the fans spin up, hdd is active... To barebones i guess.
 
Back
Top