Need advise on rad locations

headala

Limp Gawd
Joined
Jul 26, 2005
Messages
432
Hey, all, I'll be starting a new project soon, but I need help figuring out where to put the radiators.

The case is a silver Lian Li V2100 (not Plus! :) ) that I got an incredible deal on.

I'll have two loops, one for the cpu and (probably) gpu, and another for the mosfets, nb, and sb.

I just need help figuring out where to put the radiators. All the choices seen in the pics below are possible, but some combinations are better than others...I've basically got a few choices:

1) one 120.1 in the front and one 80.2 in the back (TN, check your PM's!!!)
2) one 120.1 in the front and one 120.1 in the bottom
3) one 120.1 in the front, another in the bottom, and the 80.2 in the back

mycaseradloc.jpg


I have the 120.2 rad, but I really don't want to put it in this project since I'll lose so much of the hard drive space and it will act like a vacuum cleaner on my desk!

Which choice do ya'll think is better? Are there any other ideas/combinations that you would recommend?

Thanks for the help!
 
What's your system specs? What are you cooling?

I'd go with a 120 in the front sucking in, and the 80 at the back blowing out.
 
What's your system specs? What are you cooling?

Sorry, I guess you would need that info :duh: Since this will be a long range build/mod, most of the hardware will be bought next year.

The CPU will be a Nehalem quad-core, cooled by my current Storm with a D5.

The vid card will be some DX10 compatible mid-range card; probably with just a Twinplex for the GPU and not a full coverage waterblock.

The mobo will likely be an Asus X38 based board with a twinplex on the nb and either MIPS or EK blocks on the mosfets.

The 120.1 rads are BI Stealths; the 120.2 rad that I don't want to use is a Swiftech Quiet Power.

Sorry I didn't include that in the original post.
 
use a couple Thermochill PA120.1s on the system where ever they can go and life will be good and cool.

One in the back, and one in the front would work pretty good.
 
I don't have and can't afford Thermochill rads, though I know they are among the best. My ideal would be to put a PA160 in the front, but it's 100 bucks.

Do you think that the BI Steal 120.1 can't dissipate a 45nm quad-core, or are you recommending the PA120.1's for having cooling overhead in the system?
 
a bit of overhead for upgrades down the line, and for those summer months.

I like cool temps which is why I invested in the thermochills, took me a while to afford them but if you save a few bucks here and there it adds up quick.

Plus you can run quieter fans for the same cooling performance of a BIX with a high speed fan.
 
Yeah, overhead would be nice I guess, but I reeeely don't want to have to buy *another* rad! Any other ideas to work with what I've got?
 
Back
Top