New build wont post - No beeps! Help!

rgratto2

2[H]4U
Joined
Jul 22, 2005
Messages
2,319
Trying to assemble my new computer, specs as follows:

AMD Athlon 64 X2 3800+(65W) Windsor
Gskill 2gb stick of ram
BIOSTAR TFORCE 550 Socket AM2
EVGA 640-P2-N821-AR GeForce 8800GTS 640MB
Antec NeoHE 500 Watt psu

Thats all that is currently set up in the rig. I was going to run it and flash the bios before continuing install, but that kind of requires the system to post :( . The internal speaker is hooked up to the motherboard, and there is NO beep upon booting up. I referenced my mobos manual, and there is no code for no beep.

I tried running the system without the ram in, and still no post. Im not really sure where the next debugging step is - Please help!

Edit: if you care to see the newegg links to my parts, its here:
 
Any lights on your mobo when you add power?

Did you flip the switch on the back of the PSU? Is your on/off soft-switch connected to the mobo properly?
 
Uhhh oops, i forgot to mention: the computer runs when i flip it on, the video card and the heatsink are on, but...thats about all. There are no other signs of life. I dont see any light anywhere on the motherboard, but it could possibly be blocked by the big honking GPU.
 
Did you remember to connect the 4-pin (or 8-pin) connector to the mobo (required for extra CPU power on intel boards - I assume current AMD boards require something similar? Sorry - not super familiar with AMD boards since I sold my 1GHz athlon)
 
There is an additional 4 pin connector on the mobo, but when i plugged in the cable from my psu, there was a red flashing light on the top of the mobo. It looked very menacing!

Looking closer at the cpu install manual, I was wondering if perhaps i did not seat it right. This is my first Athlon 64 (previous athlon XP), and it has changed since those days. Anyways, the cpu is in right, but the heatsinks little lever will Not turn down all the way like the manual indicates. I feel as though it will break if i put any more pressure on it. I was trying to remove the heatsink entirely and reseat it, but i couldnt even get it off.
 
Well, I'd leave the 4-pin connect plugged in :) Just make sure it's in correctly.

When I installed my core 2 duo, I was surprised how hard it was to press down the lever compared to "ZIFF" (zero insertion force) sockets of the past - it was definitely not ziff - lol. I even pulled the CPU back out to make sure I wasn't mangling the pins on the motherboard but everything looked good. (and everything worked correctly afterwards as well)

So if you CPU lever is not all the way down, that is likely your problem.

You said you can't get the HSF off? Is it due to suction? If so, carefully slide it to the side and rock it very slightly to lift it off. (watch for mobo components and don't scratch the heatspreader on your CPU if you can help it)
 
You said you can't get the HSF off? Is it due to suction? If so, carefully slide it to the side and rock it very slightly to lift it off. (watch for mobo components and don't scratch the heatspreader on your CPU if you can help it)

Well, its still latched on to the...mounting device, or whatever its called. I am unable to remove the metal clasps, its quite strange


Edit: HOly shit! i plugged in the additional power plug again and 2 LEDs came on on the board, and it beeped! POST!!!!!!!
 
Did you use motherboard standoffs? if everything is plugged in properly make sure that the motherboard isn't touching the case , if it is , its shorting out.
 
Is it all working? Seriously though, make sure that the lever is completely down or you risk frying your CPU. If you don't think it is seated properly, DO IT AGAIN. It should just drop in and then you should put down the lever. It will take pressure but you won't break the CPU.
 
Yes, as others have said, leaving the CPU... half-seated, or whatever you'd like to call it, very poor plan.
 
Ack, sorry for the slow updates, had to steal my keyboard to install windows and set up the new comp and whatnot. First and foremost, thanks everyone for the quick responses! Its so great to have such a helpful forum.

The cpu is currently being window-ized, but no, i have not resolved my cpu issue. It is still "half seated" or however you want to call it but - are you suuuure i just need to apply more pressure? I mean, it was feeling really questinable under the amount of force i was using. It is just the stock cpu, and the lever is but plastic. If you're sure though, i can tap a little further into my formidable muscle and try again...
 
Pull it out and make sure the seating mechanism isn't damaged (very unlikely, as it's running at the moment) then re-seat, and push the lever down. Athlon 64 heatsinks are difficult to get off -- you may need a medium to large flathead screwdriver in order to push down on the retaining clip enough to get it loose -- at least this was the case with my socket 939 single core, but they have likely refined things since then. Just be careful and it is very unlikely you will damage the CPU. It is important however that it is seated properly.
 
If it's working, it is seated properly. You just need to force that lever down :) (don't be ridiculous - 5lbs or so I would say, based on my C2D, but make sure you press it down all the way)

If you don't you will definitely run into problems down the road.

Make sure the system is unplugged before you reach in there! Don't do it while Windows is installing :)
 
OH!

anyways, the cpu is in right, but the heatsinks little lever will Not turn down all the way like the manual indicates.

I thought it was the CPU lever! It's the HSF lever. (I misread what you typed!)

You need to push that down as well - otherwise your CPU will run too hot. It needs a lot of pressure to transfer the heat properly... Also, the hsf might pop off if the lever isn't all the way down.
 
Ok, I can confirm this -- the levers for Athlon 64 HSFs are very 'stiff'. Push it down, you won't hurt it. It should kind of 'click' if I remember right. The little ribbed 'handle' area should be horizontal when it's in the right position.
 
Ok, I can confirm this -- the levers for Athlon 64 HSFs are very 'stiff'. Push it down, you won't hurt it. It should kind of 'click' if I remember right. The little ribbed 'handle' area should be horizontal when it's in the right position.

I DID IT! I put a bit more manpower into it and i got it to click in right. But...hot damn, it kinda hurt my finger, and definitely left and indent of those etches. Xp 64 is installed and all seems well, now the quest for compatible drivers. Thanks for everything.
 
I DID IT! I put a bit more manpower into it and i got it to click in right. But...hot damn, it kinda hurt my finger, and definitely left and indent of those etches. Xp 64 is installed and all seems well, now the quest for compatible drivers. Thanks for everything.

Good deal.
 
Back
Top