Separating my loops... interesting idea comes to light

cerebrex

[H]ard|Gawd
Joined
Sep 29, 2004
Messages
1,571
Well... I decided to expand my water cooling setup. As you may know, I've modified a Coolermaster Aquagate 1/4" system over to 3/8" and many things. Now, I've been using this to cool my CPU only, and it's unbelievably effective with a 77 bonne rad - room temperature idle @ ~30c and max load @ ~39c. Since the aquagate has it's own 80mm rad built into the head unit, I came to the conclusion that it probably would do just fine as a seperate loop for my 8800. I'm going to be upgrading my CPU loop with a northbridge block, and an Eheim 1400lph pump. I plan on leaving the 8800 with the 3/8 modified aquagate head unit. I'm sure an 80mm rad can handle the 8800 fine without any problems, Opinions?
 
Now, remember, a stock 8800GTX puts out roughly twice the amount of heat that a conroe does...

I don't think that rad could dump more than 100w of heat effectively. I'd think it probably wouldn't work all that well.
 
Now, remember, a stock 8800GTX puts out roughly twice the amount of heat that a conroe does...

I don't think that rad could dump more than 100w of heat effectively. I'd think it probably wouldn't work all that well.

true.. but I think a 80mm radiator will cool better than a stock HSF/fan, don't you?
 
Possibly, but it might very well be louder as well.

that's possible too. Only way is to try it I suppose. I do think it will be considerably better than the stock HSF though.. definately better for my case temps.
 
that's possible too. Only way is to try it I suppose. I do think it will be considerably better than the stock HSF though.. definately better for my case temps.

That's the problem with these big-ass cards... big-ass heat. My CPU cooler hangs right above the 8800. If I had an extra PCI-E card I would stick it in and see how much my CPU temps dropped. One of the reasons I would love to go water-cooling... and seriously considering it....
 
I'm willing to bet the single loop with the 80mm rad will drop load temps 20c.
 
I'm willing to bet the single loop with the 80mm rad will drop load temps 20c.

That's a crapload of degrees! Hope you're not aiming too high, especially since Arcygenical doesn't think it'll do much at all :p
 
Who knows!

Try it :)

Seriously, i'm only speaking of the theoretical, as I obviously don't have the system in question. Who knows what sort of gains you'll see in the reality.
 
Who knows!

Try it :)

Seriously, i'm only speaking of the theoretical, as I obviously don't have the system in question. Who knows what sort of gains you'll see in the reality.

well 75c on water is something I've never seen before, even on a 1/4" doorstop system... I expect to see a decent improvement.
 
well 75c on water is something I've never seen before, even on a 1/4" doorstop system... I expect to see a decent improvement.

I'm more worried about the heatsoak that accumulates over time. At the start, your temperatures would be much improved, but as the Radiator has to cope with a large continuous load, well, things could be much different.

Either way, what block will you be using Cerebrex?
 
I'm more worried about the heatsoak that accumulates over time. At the start, your temperatures would be much improved, but as the Radiator has to cope with a large continuous load, well, things could be much different.

Either way, what block will you be using Cerebrex?

I'll build one probably. Heat soak is my concern as well.. if the loop is capable of maintaining a control on the heat... I'll have to figure it out... but I think the heat dissipation of even an 80mm rad will far exceed that of the tiny aluminum HSF.
 
Back
Top