One Hot Demo

Rich Tate

Supreme [H]ardness
Joined
Jun 9, 2005
Messages
5,955
To demonstrate how well their ioSafe R4 network storage unit is built, they actually set the thing on fire. Believe it or not, the data was still readable.

The ioSafe demo, which involved a 1,700 degree burn, was held in the Screw Balls parking lot in Las Vegas.
 
:eek: Wow, that is pretty amazing. Any idea what this fire proof technology is going to cost?
 
No idea, but when I saw this piece my jaw dropped as well.

VERY impressive that they can simply cool them down and fire them up.
 
What use is it though?

The thing was only on fire for what looks like a small amount of time, and already the drives had to be cooled down, before being powered on. Any prolonged amount of time in a fire would almost certainly kill the drives.

Or am i missing something?
 
What use is it though?

The thing was only on fire for what looks like a small amount of time, and already the drives had to be cooled down, before being powered on. Any prolonged amount of time in a fire would almost certainly kill the drives.

Or am i missing something?
they were in there long enough for the unprotected drive to melt.
The protected drives were insulated enough to survive.

If this server was setup somewhere where the any fire suppression system was inadequate or malfunctioning, your data would atleast stand a chance of surviving.
 
You might be missing the fact that it clearly burned long enough, and hot enough, to melt an unprotected hard drive. Fires don't burn that hot for long periods of time anyway unless they are actively being supplied with additional fuel. If that demo represented a datacenter, I'd say they over-represented the heat, given that most datacenters have fire supression systems installed, even a catastrophic fire probably wouldn't burn that hot or that long unless it was arson and extra fuel was intentionally added.
 
If anyone is interested in how they pull it off:
http://iosafe.com/fire-protection

The drive is in waterproof insulation with a heatsink around it, and a fan cools it. In the casing there is several inches of fireproof insulation. When there is a fire, the catches holding the vents open begin to melt, springing the vents firmly shut.
moz-screenshot-3.jpg

moz-screenshot.jpg
moz-screenshot-1.jpg
moz-screenshot-2.jpg
 
Sounds like the kind of testing that the sadists at [H] Consumer would have thouight up!:D
 
That is some pretty incredible design right there. It is so simple, yet so ingenious. I expected it to be some highly advanced design when really all it involves is melting plastic.

It also amazes me that (In the last picture about the design) that the exterior of the drive can reach 1700 degrees, while the inside temperature can maintain at 210 degrees.
 
That is some pretty incredible design right there. It is so simple, yet so ingenious. I expected it to be some highly advanced design when really all it involves is melting plastic.

It also amazes me that (In the last picture about the design) that the exterior of the drive can reach 1700 degrees, while the inside temperature can maintain at 210 degrees.
Well here's something to think about, the space shuttle uses reinforced carbon and some other materials on various parts to protect it's aluminum frame from failing (at or above 175degF) during reentry where temps reach about 3000degF. Plus you have the astronauts in there too! :)
 
Back
Top