How safe is overheating, really? CPU's Auto-ShutDown?

WhiteZero

2[H]4U
Joined
Oct 21, 2004
Messages
3,638
So apparently most modern CPUs will auto-shutdown before they can overheat enough to burn out... or so I hear.

I'm wondering if anyone around here can tell their story of their computers actually saving themselves before overheating?
I see that the general thing to do after you reached the overclocked speed you want to run Othos or whatever for several hours and wait till it gets errors.
So what if this pushes your CPU to the point of failure?
So how many people have actually had thier PC auto-shutdown to prevent overheat?
 
So apparently most modern CPUs will try to auto-shutdown before they can overheat enough to burn out... or so I hear.

More like this ^^

But so far, my only dead processor is because a power supply damaged a motherboard that then damaged the CPU. Generally the computer will lock up before it can be permanently damaged, thus reducing its workload...but don't count on it. Really if it's hot enough that this is a concern, your stability is going to suck first, and you need to fix it for the sake of that.
 
The C2D's apparently are much smarter/better about this than older chips, so you probably won't have any problem with them with regards to heat (unless you try to run them w/o a heatsink :p)
 
Even if you're dumb enough to run them without a cpu fan, the C2D is smart enough to first throttle itself and if it can't keep itself cool enough doing that then it will simply shut down.

I've had my E6400 over 80C while testing without any long term problems. If you're overclocking to the max you'll likely to start to run into Orthos stability issues at around 75C so you don't have to worry about hurting anything.
 
Overheating is usually a non issu, since it will either:
a)shut itself down or throttle
b)crash completely

Overvolting is usually the killer...


I have only "burned" one cpu in years of overclocking since I started with a P166...and that was when a waterblock clip broke off and let my Athlon 1ghz cpu fry itself.....
 
I've always wanted to ask this question too. Will the "automatic" shut off deal keep you from melting your cpu to the board or will it just become unstable and BSOD itself first?
 
Well ive gotten my E6600 to 75C without overclocking....... I have the fan on max and everything i duno wtf is with it im mad that my brand new computer is over heating when everything is on stock settings ( Didnt change anything).
 
Well ive gotten my E6600 to 75C without overclocking....... I have the fan on max and everything i duno wtf is with it im mad that my brand new computer is over heating when everything is on stock settings ( Didnt change anything).

Thats hot....Make sure the HSF is clipped on properly...they are real easy screw up..look closely and be sure that all 4 clips are all the way in the MOBO......or it will not be in good contact with the CPU....
 
Supposed to is how I see it. I had a 3.4 Ghz Prescott hit 120C before it decided it should shutdown. It eventually burnt itself out . It was completely random too. I was using my comp shut it down and left and came back and it wouldn't finish booting got into the BIOS long enough to see 120C and know the chip was fried.
 
Back
Top