No silencer for 8800s?

AeriaGloris

Limp Gawd
Joined
Apr 7, 2005
Messages
384
Does anyone know if/when an Arctic Cooling silencer will be realeased for the 8800 series of graphics cards? My card gets very hot, even heating up the whole back of the case after a long gaming session. For me this is the first card that has actually made a difference to the load temp of my cpu, so I really want something to push that heat out of the case.
 
I think they discontinued the Silencer Series. Your pretty much out of luck getting a aftermarket DHES cooler.
 
Thermalright HR-03 Plus with a 92mm Vantec Silencer on top works wonders.

Dropped original temps 10C. Flashed the BIOS to BFG's 8800GTX OC2 specs, only goes up 3-5C at max settings in games like Oblivion, Supreme Commander, etc.

I honestly recommend it.


What I didn't like is I thought the thermal tape was crappy. Maybe I didn't clean good enough, I thought so, but it liked to fall off. I still got everything on there fine and secure though, just felt too loose.
 
Thermalright HR-03 Plus with a 92mm Vantec Silencer on top works wonders.

Dropped original temps 10C. Flashed the BIOS to BFG's 8800GTX OC2 specs, only goes up 3-5C at max settings in games like Oblivion, Supreme Commander, etc.

I honestly recommend it.


What I didn't like is I thought the thermal tape was crappy. Maybe I didn't clean good enough, I thought so, but it liked to fall off. I still got everything on there fine and secure though, just felt too loose.

Yeah I've seen that but it would take up all my pci slots so it's not an option.
 
I think they discontinued the Silencer Series. Your pretty much out of luck getting a aftermarket DHES cooler.

You cant be serious.:( I've been putting off getting an aftermarket cooler till a silencer came out for it. Ive used them for my 2 previous cards and loved them. Well Hopefully something wil come out along the lines of it. Hell, even the stock cooler would be better if the fan blades were bigger and didnt have those slits near the back.
 
arctic cooler's make the HSF on g80 anyway.
you can make it silent, run at about 50degrees, and have a huge overclock on it.......bring on water...
 
The lowest I've seen my gtx idle at is 66C with the fan at 80%, and tops out at about 87C to 93C depending on the ambient. I think I mite end up getting the HR-03 Plus since I only use a single card and my X-Fi, especially since my next gfx card upgrade will prolly be crossfire anyway.
 
arctic cooler's make the HSF on g80 anyway.
you can make it silent, run at about 50degrees, and have a huge overclock on it.......bring on water...

This is what I thought, as well. The thing is, with the MCW60-R and 44C under extended load (dual Prime95, during 3DMark06 demo loop - after almost an hour). I still get an optimal setting detected by Ntune of 487Mhz, which is less than the 513 it shipped at, stock. That is the same exact detected number as when it was @ 76C under load with the stock cooling (and my poor ventilation, pre WC loop/radiator fans install).

I run Vista and the associated Nvidia drivers - that seems to be the actual issue, since I could do 574Mhz w/no problems under the same (pre watercooling) 76C temps while running XP SP2. That is very dissapointing. Watercooling is definately no cure-all.
 
I know the 8800 cards have those three holes that dump air into the case as the air heads across the hs and out the back.
What would happen if you covered up those three holes and just let the air go out the back? I can't believe that the card temps would increase all that much.... but i could be wrong...
 
I've seen a few people do it, and some report drops in temps and others rise in temps, so I dont know lol.

I dont have the guts or the money to WC yet anyway, so I need the best air cooler I can get, 93C is just not acceptable.:(
 
I've seen a few people do it, and some report drops in temps and others rise in temps, so I dont know lol.

I dont have the guts or the money to WC yet anyway, so I need the best air cooler I can get, 93C is just not acceptable.:(

Ya know, when I removed my XFX's stock HSF, I was rather appalled at the quality of the thermal interface that was used. You might just try unscrewing it, popping it loose from the gunk that is on there now, and just reinstalling it with some quality thermal compound. Especially if you have some around, anyway. That would be a free mod, but honestly, spending the few bucks it would take for some good stuff and reseating it if you don't have any already would likely help a lot.

Also, that fan tries to exhaust out the case. If you have a lot of other fans exhausting too, they are fighting it in its attempt to get air through and out. I switched the direction of one of my fans and I dropped from 82C to 76C. That one I switched was my only 120mm, but you get the idea, if it even applies to your situation.

Just a couple of ideas, based on my own experience. Take it or leave it. :cool:
 
Ya know, when I removed my XFX's stock HSF, I was rather appalled at the quality of the thermal interface that was used. You might just try unscrewing it, popping it loose from the gunk that is on there now, and just reinstalling it with some quality thermal compound. Especially if you have some around, anyway. That would be a free mod, but honestly, spending the few bucks it would take for some good stuff and reseating it if you don't have any already would likely help a lot.

Also, that fan tries to exhaust out the case. If you have a lot of other fans exhausting too, they are fighting it in its attempt to get air through and out. I switched the direction of one of my fans and I dropped from 82C to 76C. That one I switched was my only 120mm, but you get the idea, if it even applies to your situation.

Just a couple of ideas, based on my own experience. Take it or leave it. :cool:

Well heres my fan setup in my thermaltake kandalf:
2 70cfm delta 120mm fans for front intake
1 60cfm 120mm scythe s-flex fan modded into the side window for intake right next to the video card
1 92mm 40cfm panaflo top exhaust
1 120x35mm 80cfm delta rear exhaust and one more panaflo 92mm exhaust above it

I dont think reversing any of those would help much, or adding or taking away any.

I think I might try taping up those slits near the back so all the heat actually goes out of the case instead of leaking back in the case through those.
 
The lowest I've seen my gtx idle at is 66C with the fan at 80%, and tops out at about 87C to 93C depending on the ambient. I think I mite end up getting the HR-03 Plus since I only use a single card and my X-Fi, especially since my next gfx card upgrade will prolly be crossfire anyway.



:eek:


57C idle with a hr-03. i guess i'm glad i bought it
 
Back
Top