Buildng a new rig...need your help

inglewood78

[H]ard|Gawd
Joined
Aug 25, 2004
Messages
1,465
I used to be very knowledgeable with the newest cpus/mobos, price/performance, etc etc. Unfortunately, B-school has taken up all my time and I haven’t been able to keep up with the industry in a while. Please help if you can.

Situation: Building a new rig (budget – up to $2000)
Use: Mainly gaming (mostly WoW)
Size preference: SFF if possible but will entertain up to mid towers
CPU preference: either Intel or AMD – looking for the best bang for buck
Monitor: Dell 24inch widescreen – so video card will have to run games at 1920x1200 fairly well

I hear there is a price cut around late April, so I’m assuming I should at least wait until then.

Additionally, are there new technologies just right around the corner that would make it wise to wait for a bit longer? I know computer performance is ever changing…but I’m speaking more to revolutionary change instead of evolutionary.

Thanks to everyone in advance.

Edit: I currently have the monitor, so that will not be priced in.
 

ugh... had to click on all those links...

the GXS 700W has ripple. ripple kills parts over time. while your parts may not die, there are better alternatives, like the corsair 620w. even the corsair 520w will power that system. see jonnyguru.com for more info on the ripple of the gxs700, and/or for more psu suggestions.

also, the 680i SLI boards have alot of problems, so if you don't want to deal with them, check out the 680i LT SLI boards instead. the p5n32e sli plus board is also a good alternative.

dominators are a waste of money, imo, especially if pairing it with a cpu with a high multiplier like the e6600. super duper overclockable ram nor super high speed ddr2 is not needed with that cpu. ddr2-1066 would be a 533mhz bus, and no board is capable of that just yet (that i am aware of). furthermore, 9*533=4.8ghz, which is impossible without exotic cooling. hence, no need for ddr2-1066 ram. buffalo firestix ddr2-800 or g.skill 2gbnq sticks will do just fine.

the seagate 7200.10 320gb would be a better choice over the wd2500ks. the .10 is much faster, and doesnt cost much more. though, some consider the seagate to be loud, so the wd 320gb would be an alternative. though, with a budget like 2k, one should be able to squeeze a raptor in there.

I hear there is a price cut around late April, so I’m assuming I should at least wait until then.

Additionally, are there new technologies just right around the corner that would make it wise to wait for a bit longer? I know computer performance is ever changing…but I’m speaking more to revolutionary change instead of evolutionary.
yes, wait until the end of april for the price cuts.

the revolutionary changes are due out in about a year. so, if you can wait that long, go ahead. otherwise, build what you need, when you need it. the r600 should be out soon, as well as nvidia's midrange dx10 cards, which should push prices lower.

for your size monitor, i'd suggest the 8800gtx. see other suggestions above.
 
ugh... had to click on all those links...

the GXS 700W has ripple. ripple kills parts over time. while your parts may not die, there are better alternatives, like the corsair 620w. even the corsair 520w will power that system. see jonnyguru.com for more info on the ripple of the gxs700, and/or for more psu suggestions.

also, the 680i SLI boards have alot of problems, so if you don't want to deal with them, check out the 680i LT SLI boards instead. the p5n32e sli plus board is also a good alternative.

dominators are a waste of money, imo, especially if pairing it with a cpu with a high multiplier like the e6600. super duper overclockable ram nor super high speed ddr2 is not needed with that cpu. ddr2-1066 would be a 533mhz bus, and no board is capable of that just yet (that i am aware of). furthermore, 9*533=4.8ghz, which is impossible without exotic cooling. hence, no need for ddr2-1066 ram. buffalo firestix ddr2-800 or g.skill 2gbnq sticks will do just fine.

the seagate 7200.10 320gb would be a better choice over the wd2500ks. the .10 is much faster, and doesnt cost much more. though, some consider the seagate to be loud, so the wd 320gb would be an alternative. though, with a budget like 2k, one should be able to squeeze a raptor in there.


yes, wait until the end of april for the price cuts.

the revolutionary changes are due out in about a year. so, if you can wait that long, go ahead. otherwise, build what you need, when you need it. the r600 should be out soon, as well as nvidia's midrange dx10 cards, which should push prices lower.

for your size monitor, i'd suggest the 8800gtx. see other suggestions above.

my personal experience: the P5N32-E SLI plus is an unstable piece of shit with screaming coils. the EVGA 680i A1 is an absolute joy to work with, the dominator RAM makes a huge difference and it runs great in unlinked mode. if you know of some other RAM that will run at 1175mhz with 2.2volts then please share. I also had the G-Skill DDR2 800 and it was crap, it took 2.4volts to post with any FSB overclocking and wouldn't run anywhere near the advertised speeds, the dominator is beating advertised speeds and requiring no more voltage.
http://i16.photobucket.com/albums/b24/M3Dust/pc/st2.jpg
 
What? 1175Mhz? Surely you mean 587.5Mhz, no? Unlinked mode... So whats the performance difference between $130 DDR2-800 sticks versus $320 DDR2-1066 sticks with the base FSB set to 400Mhz for both tests? is it really worth the extra cash? I doubt it.

I've used over ten 2gbnq kits, and none of them had problems running at stock speeds of DDR2-800 @ 5-5-5-15 w/ 1.8v. In fact, several of those kits were able to OC to 450Mhz.

I just got some Crucial Ballistix DDR2-1000 for $235 ($185AR). I'll see how those perform and let you know if they can reach DDR2-1175 @ 2.2v. Even if they don't, they're still a better deal than DDR2-1066 Dominators, lol.
 
Back
Top