How to over clock a Vid Card?

jeeper07

Limp Gawd
Joined
Nov 19, 2006
Messages
200
I have an ATI x1950 Pro with zalmon cooling. I dont know how to over clock it but would like to and see what effect it has and if i need it to be. Can any one help me out my aim is jeeper09 for easier conversation thanks.
 
What can be used to OC a nVidia card? I tried downloading coolbits, but I get issues.
 
ok so what would a safe over clock for this card be ? I have a zalmon cooling unit on it so how high can i go? here are the current readings on it at stock .

untitled.jpg
 
i have no idea how to use that program. ill probably stick with the ati over drive unless ud like to help me with it
 
and what is a safe temperature in C ? what would be considered over heating?
 
and what is a safe temperature in C ? what would be considered over heating?

Anything over 80c would cause concern for me. I hear they can go hotter but its up to you.

The hottest my 1900xtx got was 88c when I was experimenting with OCing. The hottest it gets now is 74c and cooler kicks to 100%.

I dont know if ATI Tool supports the 1950 pro. If it does its a excellent OCing program with good temp reporting.

//edit

Saw your idle temps in your screen shot. 33c is nice and cool for idle temps.
 
Bump your memory 10mhz. Then run a game/benchmark and look for artifacts. Continue to do this until you see artifacts. After you see artifacts, back down 10-15mhz. That should be a suitable speed for your memory.

AFTER you have overclocked your memory and see no artifacts from it, you do the core. Overclock the core in the same way. After you find a stable overclock for your core, i would test your new overclocked speeds in an intensive game. If you don't see any artifacts after 3-4 hours, you should be all set.

Keep an eye on your temps. Personally, I would stop overclocking if your temps go above 90c.
 
Bump your memory 10mhz. Then run a game/benchmark and look for artifacts. Continue to do this until you see artifacts. After you see artifacts, back down 10-15mhz. That should be a suitable speed for your memory.

AFTER you have overclocked your memory and see no artifacts from it, you do the core. Overclock the core in the same way. After you find a stable overclock for your core, i would test your new overclocked speeds in an intensive game. If you don't see any artifacts after 3-4 hours, you should be all set.

Keep an eye on your temps. Personally, I would stop overclocking if your temps go above 90c.

what do u mean look for artifacts.
 
oh ok.. i bumped both up considerably and still was at 33 degrees after playing counterstricke for about 15 mins
 
Sounds good so far, just keep pushing it slowly, 33c is low for a gpu under load so theres no need to worry about heat problems just yet.
 
I have the exact same card (with the Zalman cooler) and I have no problems bumping up to 621/1598 using Overdrive. Rivatuner and ATITool don't support the X1950Pro, so just use Overdrive. However, the card wasn't 100% stable at 621/1598. It would play games for hours stable, but it didn't run Folding@Home without errors (F@H puts a 100% strain on the GPU at all times, something that games come close to but do not reach). So now I have it at about 608/1500 completely stable. If you're not running F@H and you have good temps, bump it up all the way. The temps don't change that much.

Oh yeah, for some reason, it says it can go up to 627 core, but mine automatically went down to 621.
 
I've got a Visiontek X1950 ProXGE and would like to know where to find this overdrive feature ya'll are talking about. I looked in the Control Center and don't see it???
 
I've got a Visiontek X1950 ProXGE and would like to know where to find this overdrive feature ya'll are talking about. I looked in the Control Center and don't see it???

Overdrive is in the Catalyst Control Center (make sure you're using the Advanced, and not Basic, option). It should be the last tab on the left.
 
I can't seem to find it in mine? It is CATALYST® Version 06.8
CATALYST® Control Center Version 1.2.2425.37188
I'm on dialup and i can't seem to stay online long enough to upload a screenshot :rolleyes:
but there is not a overdrive in mine?
 
Ok, I found out why I can't see it. It appears that the Visiontek card doesn't have a sensor on the GPU therefore it doesn't support the overdrive feature. Go figure I find this out AFTER i bought the card. What would be a good reason to return it to Comp USA?
 
Back
Top