Alfie_dono
n00b
- Joined
- Mar 8, 2011
- Messages
- 23
My temps seem a bit high, so I wanted to check if anyone here with experience with this stuff can tell me whether I stuffed up the heat sink installation
I have a Zalman performa cooler on a 2600K CPU
At stock the load temp under prime 95 is about 57 degs with 27 deg ambients
At OC 4.5 Ghz (but at a relatively low vcore of 1.23v) the load temp under prime 95 is about 64 degs with 27 deg ambients
This is all with fans at 100%.
Are these temperatures what one would expect from this cooler and PCU combination?
It was the first time I installed a heat sink and I applied the thermal paste fairly thinly.
I have a Zalman performa cooler on a 2600K CPU
At stock the load temp under prime 95 is about 57 degs with 27 deg ambients
At OC 4.5 Ghz (but at a relatively low vcore of 1.23v) the load temp under prime 95 is about 64 degs with 27 deg ambients
This is all with fans at 100%.
Are these temperatures what one would expect from this cooler and PCU combination?
It was the first time I installed a heat sink and I applied the thermal paste fairly thinly.