WinXP wont boot after BIOS Flash

Joined
Jan 9, 2002
Messages
776
After flashing the BIOS on a MSI K7T266-Pro2-RU I find that WinXP pro SP-1 simply won't boot. I was still able to boot with a Win98 floppy and flash the version 3.3 back on and then the system would boot. Oh, the reason I was flashing in the first place is that when I install a Promise IDE card the system would not boot. I was hopeing that the mobo bios flash would help the system use that card.

So to my question. Is it possible that I need to upgrade the mobo via chipset drivers before I flash the bios? would it make any difference?
 
The problem isn't the BIOS, it's putting in an IDE controller card onto an existing XP installation. You need to load driver support for it before putting in the card and attaching drives. If you're putting a hard drive with XP on the IDE card, the HAL (Hardware Abstraction Layer) will probably give you fits.
 
The Raid card instructions usually tell you the order.... so Windows won't piss down it's own leg.

Then have to pay attention to BIOS settings and double check that you want to boot from where you want.
 
Thanks guys.

I don't plan to boot from any devices attached the the aux card. It will have just a 160GB HD for video clips/captures, etc and my DVD burner. I'll try installing the driver support for the card first, then installing the card.

Still doesn't explain why the BIOS upgrade kept the system from booting even without the IDE card in but if I can get it to work with the older BIOS I'll be happy.

Thanks again. I'll let you know what happens but I won't get to it till tomarrow.
 
Back
Top