Windows starting only with install disk... weird

torrey.smith

I Love the Cock - Please PM Me
Joined
Mar 19, 2007
Messages
738
Hey Guys,

I installed Vista 64 and updated, installed drivers, etc. Many "restarts" were performed during this time with no problems. Upon the first "shut down" followed by a cold start, it failed to start during the part where there is a scroll bar moving from left to right. It would freeze and then immediately restart, and then give the "windows failed to start" screen.

I threw in the install disk and set the BIOS to boot from CDROM before HDD. It "loaded files" and then let me "repair windows," where it said that a recent driver update may be to blame. At this point, I can restart, set BIOS to boot from HDD, and it loads windows successfully. However, it will repeat the cycle all over again if I restart.

I have "checked for updates" and all of the components say they have the latest drivers installed.

Thoughts?
 
I figured it out. Somehow I had screwed up the drivers for the graphix card; when I re-installed Vista, there was a hiccup updating the "NVIDIA 8800GTX" driver during the initial update, but it went through smoothly upon restart. Now it restarts fine, cold or otherwise.

The underlying issue here is do I let vista update everything and call it good, or do I install all of the software on the DVDs that came with the hardware and update from there. (maybe just make sure not to mess it up if I do it directly :eek: )

On to installing everything else, but I have to get up in 3 hours, so sleep and work first :rolleyes:
 
Back
Top