Which AM2+ board to get?

TuxedoBond

Weaksauce
Joined
Jun 12, 2009
Messages
102
I need a board with SB750 and 790X/GX. I want a board that is good to overclock with and is stable. I'll probably be running two cards in Crossfire in the future.

This is my setup:
Phenom II 955
Radeon 4870 1GB
4x2GB DDR2 1066 RAM
Hitachi Deskstar 7K1000.B 0A38016 1TB
LG GH22LS50 SATA DVD Burner
ENERMAX ELT620AWT-ECO Liberty ECO 620W or CORSAIR CMPSU-620HX CMPSU-620HX 620W

The boards I've had in mind thus far are:

Foxconn A7DA-S - $86.61

MSI DKA790GX - $84.2 - 4-Pin CPU power connector.

Gigabyte GA-MA790X-UD4P - $94.33

GIGABYTE GA-MA790GP-DS4H - $96.22 - Some SATA ports will probably be blocked when adding a card to the second PCI-E 16x slot which I don't like.

All prices are the best I could find at the time of this post.

I don't need integrated graphics although it would be a handy temporary solution if my card ever died.

Which board is preferable between the MSI and Foxconn? And between all of them? Are the Gigabyte boards worth the price difference compared to the Foxconn and MSI?
 
Last edited:
I'm just about to build an AM2+ system and I plan to use the GA-MA790X-UD4P
Heard a lot of good things. Hope this helps
 
Try avoid Foxconn. Its board is nice, but the bios is crappy. MSI used to be good, but now has some poor low-end boards. Finally, I believe all Gigabyte DS series have already been replaced by UD series.
 
If you don't expect yourself to ever want CrossFire, the Gigabyte 770 board might be a better choice.
 
If you need onboard video then the msi 790gx board would be a fine board...if you dont need ob/video then the gigabyte 790x board is the way to go...overall better o/clocking with the giga also....
 
I've had really good luck with the GA-MA790X-UD4P. Really nice board, excellent BIOS as well. Easily unlocked the X2-550 to a quad. :)

Only odd thing about the board is, it's not actually a full ATX form factor. It's a bit shorter (case front to back) which means you will not be using the end stand offs (towards front of case) you have to be careful not to flex the board and touch the case when pushing in connectors. No idea why Gigabyte did this. But it's minor, love the board otherwise. (I put some foam under the front area of the motherboard just to be safe)
 
The Gigabyte seems to have the RAM slots closer to the CPU socket than the MSI and Foxconn board, which would mean my Reaper RAM wouldn't fit with my ZEROtherm Zen CPU cooler.
 
Last edited:
Do you think I will have any trouble with the 4-pin CPU power connector versus having an 8-pin?
 
Do you think I will have any trouble with the 4-pin CPU power connector versus having an 8-pin?
I am presently running a 4-pin in the 8-pin without incident.

Kind of wondering how common this is as I have a newer psu without the 8-pin adapter.
 
790X-UD4P gets a vote from me (hey that rhymes).
Super stable, easy BIOS, runs fine. Does it's job well.
 
It doesn't look like it will have enough space with a ZEROtherm Zen CPU cooler and any RAM with heat spreaders. Does anyone have a measurement for any of these boards of the amount of space between the top of the plastic CPU socket and the first RAM slot?
 
How come your not considering an AM3 based system? I know the AM3 DDR3 is not much faster but the platform should be supported for longer right? I'm on AM2+ now and wondering when new processor support would end?
 
no matter what the reviews say.. do not buy a foxconn.. they are an oem board producer and even their high end boards prove that.. they are also a supplier for asus for certain parts..

am2+ will be supported all the way to the bulldozer most likely.. so the best bet is to get a cheap am2+ board if you already have DDR2 memory laying around for it.. then when the higher end stuff like the bulldozer comes out then switch to am3+ which what will be the primary socket for bulldozer but it will still work in the am3 sockets as well.. the only difference between the am3+ and am3 will be that the am3+ has the newer HT4.0 or HT5.0 which ever they decide to call it.. which will allow for 6.4ghz hypertransport.. at least thats what they are saying right now.. its quite possible it may go as high as 7ghz hypertransport..


as far as the 4 pin vs 8 pin thing i believe the 8 pins only required for extreme overclocking or better voltage regulation which doesnt matter..
 
I was going to suggest looking at the GIGABYTE GA-MA785G-UD3H but the crossfire support leave a bit to be desired if your really thinking about going that way.
 
I vote for the GA-MA790X-UD4P, using it right now and it seems nice. I've always liked Gigabyte motherboards, always in high quality and not so expensive.
 
I have a quick question the the Gigabyte UD board, it shows spec of DDR2 1333 OC, does this mean it can run 4x2gb 1066 sticks at 1066? Or still a AM2 issue?
 
I have a quick question the the Gigabyte UD board, it shows spec of DDR2 1333 OC, does this mean it can run 4x2gb 1066 sticks at 1066? Or still a AM2 issue?
I'm running @1066 using 4 x 2GB sticks with P2 550 BE on MA790X-UD4P.
 
Back
Top