Where are the AM4 ITX boards?

building up my mini itx collection
35775545471_30f7103c46_z.jpg
 
Hey Ken what kind of cooling and what kind of temps are you seeing on VRMs and motherboard

Here is a quick screen 14mins in on RealBench stress . MB temps and AUXTNs are off the chart..in the cool evening 116c ..today upto 122c ..

Someone mentioned a chipset 'finger test' ..I did touch the cooler and hold it there for 5 seconds ..at the end I could feel the heat but not burned when touched .

Kenny
Temps.jpg
 
Yeah these temps are strange, i have a mATX asrock the b350 pro m or what ever and it shows vrm, but just sitting idle it shows 94c. There is no way its that hot. And i have 2 MSI boards and they only show a "motherboard" reading. And the matx i have with a 1700 the b350 mortar and that temp goes up from 45 to 80 under full load after 15 minutes. But the cpu is clocked at 3.7 all cores and with the water cooling it doesnt go above 60c on the package. So i really do not know what to trust
 
Yeah these temps are strange, i have a mATX asrock the b350 pro m or what ever and it shows vrm, but just sitting idle it shows 94c. There is no way its that hot. And i have 2 MSI boards and they only show a "motherboard" reading. And the matx i have with a 1700 the b350 mortar and that temp goes up from 45 to 80 under full load after 15 minutes. But the cpu is clocked at 3.7 all cores and with the water cooling it doesnt go above 60c on the package. So i really do not know what to trust

'CPU (Tdie)' pretty much corresponds to what Ryzen Master was showing ..so have been watching that ...and its pretty decent so far .

The OC3D review of the Gigabyte am4 itx board has me paying attention ..but think at least of the mb temps go it may be off or the temp program may be mis reporting ..this box has been rock solid overall .

Kenny
 
Do the other itx boards have LLC control in the bios? I can't seem to find it in my asrock x370 itx.
 
I have no idea.

But I can't see Asus sitting on the sidelines watching this and not jumping in.
I can, but I hope I'm wrong. I can see them making a strix itx or prime board perhaps. Something along the lines of what is already available.

Again, I hope I am very wrong. I would love to see them cram more vrms, audio riser cards and all the crazy things they used to do.
 
I can, but I hope I'm wrong. I can see them making a strix itx or prime board perhaps. Something along the lines of what is already available.

Again, I hope I am very wrong. I would love to see them cram more vrms, audio riser cards and all the crazy things they used to do.

an am4 with a vrm riser would be awesome.
 
Nothing to gawk at but here is my AB350gaming wifi Gigabyte installed....

Lots of work to do to finish i.e. ran out of hardline fittings etc.... gotta order more.

I didn't like the lack of IO ports on the Asrock. Since I run an OCulus Rift I wanted more ports to support the 4 USB ports this thing takes with 3 cameras and the eyemask. I also didn't want to pay a premium for the 370 chipset when there is no possible way to do SLI on an ITX board.

the B350 has VERY vanilla OC settings but it will OC just fine. I am running 3200 ram just 100% stable with no issues whatsoever with CPU at stock clock for now. I prefer the energy savings of dynamic clock speed when not being used as opposed to setting a hard OC and wasted clock cycles/heat etc.... no need the 1700x is plenty fast at stock speeds when you feed it fast ram.

I put my CH VI up for sale as I am getting ready to purchase a 1950x when they go live and do a big monster power build on that chip.

Gotta strip the antec logo off the power supply there. Also need to order more hardline fittings so I can redo the loop in a cleaner better way. Plus I ran out of hardline and fittings so I had to finish the outflow section of the CPU with regular flexible line.

Those are not scratches on the acrylic window. It is dust because I just got done cleaning my computer room down here. I didn't wipe the acrylic before taking photo. Brand new case too. Fractal Design Nano S ITX chassis. A pain in the ass to install stuff in but still pretty roomy at the end of the day for a tower ITX chassis.

CPU idles at around 25 or about where I run my AC unit down here. The chipset on the other hand idles around 60c so I am going to get a small cooling fan for it and place it on top of the heatsink. The VR mosfets also idle around 59c so I need to get some better airflow on those.

Other than that its a nice little board for the price.

 
Last edited:
Used The ASROCK F Stream utility this morning ..is showing 35c MB temps instead of 122 like HWNFO ...it also showed correct 1600x temps .

Maybe the HWNFO is reported F ?

Kenny
 
Back
Top