whats the better chip?

Im thinking the AMD Athlon 2400. Socket A? I had that chip, ran great and played FEAR, BF2 etc on it w/ no problems. I gave it to my brother and he still uses it for gaming.

The Celerons, i think, are somehow more crippled than the D series? Haven't owned one, not positive on that.
 
ok thanks, ive got both chips but need a mobo for each, so I think ill go with the socket A then.
 
If all you have is the CPU, you might be better off just getting a new CPU. Heh, with how cheap CPUs are, you're only saving around $65. $65 will get you a dual core X2 3600+, lol. That'll blow both of those CPUs away.

If you have RAM, then it might be worth using the CPU, but that all depends on how much ram you do have and what the system is for.

You'd be surprised at how cheap a new computer could be.

For SocketA, the board will have to be used. Don't pay too much for it.
 
I've got

- AMD 2400+ / Celeron 3.06ghz
- Antec sonota case
- 3 X 512mb DDR PC3200
- Ultra 300W PSU
- DVD burner
- 9600 pro 256mb

So basically I want to spend like practically nothing to get the computer up and running, therefor I dont wanna buy a new chip...

So the AMD chip is the way to go then?
 
The AMD CPU runs at DDR 266 (PC2100) so the memory would be downclocked. Not sure what the speed would be for the Intel.

Newegg's supply of new mobos seems out of stock. Tiger direct still has one, though.

http://www.tigerdirect.com/applications/category/category_slc.asp?CatId=179&

Definitely not the best socket A mobo, but new. I always recommended the VIA Dragon series for socket A. About a year or so ago I bought one for my brother, it even had SATA ports on it.
 
AMD 2400+ or Intel Celeron 3.06 ghz



Thanks

Foz


Is that a 2400+ Athlon XP Mobile processor?

and is that a socket 478 or a socket 775 model?

If you go with the Celeron D you can get a motherboard with pci-express....
 
The AMD CPU runs at DDR 266 (PC2100) so the memory would be downclocked. Not sure what the speed would be for the Intel.

Newegg's supply of new mobos seems out of stock. Tiger direct still has one, though.

http://www.tigerdirect.com/applications/category/category_slc.asp?CatId=179&

Definitely not the best socket A mobo, but new. I always recommended the VIA Dragon series for socket A. About a year or so ago I bought one for my brother, it even had SATA ports on it.

Wrong and wrong!

You can get DDR400 RAM working with the 2400+ if you have a motherboard that supports said memory speed.

Also I'll have to argue that the nForce2 is the best chipset for Socket A.
 
I've got

- AMD 2400+ / Celeron 3.06ghz
- Antec sonota case
- 3 X 512mb DDR PC3200
- Ultra 300W PSU
- DVD burner
- 9600 pro 256mb

So basically I want to spend like practically nothing to get the computer up and running, therefor I dont wanna buy a new chip...

So the AMD chip is the way to go then?

I missed that you had said hardware :X

Just buy a used nforce2 board off the forums. the abit nf7-s would be preferred.
 
Not wrong. The processor runs at 266, therefore while the motherboard can support DDR 400 it won't do any good w/ the CPU not being able to run at that speed.

PC basics.

Also, how can someone's opinion on a motherboard be 'wrong'?
 
Not wrong. The processor runs at 266, therefore while the motherboard can support DDR 400 it won't do any good w/ the CPU not being able to run at that speed.

PC basics.

Also, how can someone's opinion on a motherboard be 'wrong'?

I was too quick to jump on the 2nd "wrong" so I'll apologize, sorry. I meant to say if you're getting a Socket A board, the nForce2 chipset is the way to go.

When you say the processor runs at 266 and the CPU can't run at 400, that's misleading. The memory can run at DDR400 even if the front side bus is 266. With a unlocked Athlon XP you can change the multipliers and run the front side bus at higher speeds than 266.
 
Back
Top