• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

What cables do i need ?

B

Binar

[H]ard|Gawd
2FA
Joined
Dec 8, 2007
Messages
1,167
This is an old case that has a switch on front panel. Used to power up a water pump but all I want is power and attach a darn fan that i can adjust . Not sure what cables I need. Anyone help ?
20231019_220206.jpg
 

Attachments

  • 20231019_220136.jpg
    20231019_220136.jpg
    140.8 KB · Views: 0
The male connectors would go to a 3-pin fan or pump, the female connector could go to a 3-pin motherboard header, or a molex or sata to 3-pin fan adapter (to get power directly from the PSU).

If you have a 4-pin fan you'd like to use, you can get an adapter, or cut the shell on one side of the male connector to allow the 4-pin connector to fit. Just make sure you cut the correct side or you'll have to cut the other side as well.
 
  • Like
Reactions: Binar
like this
You must log in or register to reply here.
Back
Top