• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Weird vCore on E6300

M

Martel-fs

Limp Gawd
Joined
Sep 3, 2006
Messages
156
So I've been tweaking around on my new rig, and I've noticed something strange with the vCore...

When I set it to auto in the bios, it typically sits at around 1.38v.

I then manually set it to 1.325v and its now sitting at 1.264v.

Shouldn't auto have it at 1.325v? Is my monitoring program lying to me? I'm using the one that came with the Asus motherboard, though CPU-Z reports the same. What's going on here?
 
I have the same "problem" on my system. In the bios my voltage is set to 1.425 but in cpu-z it shows between 1.344-1.368... but everything is stable, ran prime for 12 hours all fine, load temps are ok.

When set to 1.375 in bios it don't go past 1.310 and one of my core was crashing in prime95 after 30 min.

Anything to worry about?
 
You must log in or register to reply here.
Back
Top