• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Watercooling route

Loop order makes very little difference. Unless you have (very) low flow, the water only warms up by a degree or two as it passes through a block thanks to water's high heat capacity, so the difference in your CPU or GPU temps should be less than a degree.

It makes more sense to plumb your loop in a way that's short easy to manage. The obvious exception is that reservoir should come before pump because it makes filling and bleeding so much easier.
 
I would go..

Pump/Res-> Top Rad, ->Apogee-> 5870-> 5870-> Bottom Rad-> Pump Res. You could of course reverse it so the bottom rad is first, but you will not get much if any differance other then maybe how long it takes to bleed.

Either way would give you the shortest amount of tubing.
 
You must log in or register to reply here.
Back
Top