Water Rig on Deck

[Metrocall]

Alright well I figured I would share this as it seems(to me) very interesting and something I have wanted to try for a while. Also the chip is the same as in this last thread I did:
http://www.hardforum.com/showthread.php?t=1419703

Basically I have done as the title suggests, put my rig(in sig but a 4850 instead) outside. The temperature is roughly 55F(12.6C on temp probe) and the water temperature is reading at about 15C.

I can not tell what my temperature it idles at as the readings stop at 37/24. On prime95 and IBT however I end up with this at stock:

After a bit of raising he FSB 5mhz, than setting new clocks in BIOS every 100mhz, than getting to 4ghz I end up with this. Those max temps stayed there even after 2 more sets of 2 passes.

I am still following that process and have so far gotten to 4.2 with no issues. I am going to continue this process and hopefully pass my own personal record(in thread listed above). I'll keep updating as I hit milestones.

Here are some pics of interest as well.

 

[LOCO LAPTOP]

That is something I would do.

But I live in florida

 

[lollerskater69]

That is something I would do.

But I live in florida

Feel your pain bro. In Tampa it's still in the high 80's/90's

 

[Metrocall]

Southern VA but in the mountains. Although I plan to stop sorta soon the temp is supposed to go to about 38F tonight. And also the water temp has gone down to 14.6C and the air is 11.4C.

 

[Metrocall]

Alright hit 5ghz and its still rising.

http://valid.canardpc.com/show_oc.php?id=740557

 

[LOCO LAPTOP]

Very nice.

 

[Metrocall]

Alright I was able to boot 5.1 with 1.6v... I'll be trying for 5.2+ probably tomorrow but for now I'm off to bed.

 

[King Icewind]

Sweet.

But you have to use your computer on the floor?

 

[hotbrass]

That's awesome. I would try that, but I think rain would get to mine. 5.1GHz is amazing btw.