USB 2.0 Won't Work

S

SPPaintball

Weaksauce
Joined
Jul 22, 2005
Messages
122
It only operates at 1.1 speeds. What drivers am I missing/do I need to update?

Computer specs in sig.

Thanks everyone, as usual.
 
Hardware device manager. Click on USB hub and update drivers..allow to do this one time.
Done.
 
Already tried that. It said it couldn't find a better match than the drivers I already have installed.
 
is it a computer with front and rear usb ports? some units the rear ports are 1.1. ports and the front ones are 2.0
 
The motherboard itself has 6 USB ports on the back and 2 I/O connectors for four external USB ports. Manual says that the rear panel ports operate at speeds of 2.0/1.1 as well as the I/O USB connectors.
 
instead of just updating them, uninstall them and reinstall them.
also make sure your chipset is up to date.
 
Worth a shot:

Unplug ALL USB devices.
Open Device Manager.
View, Show Hidden Devices.
Uninstall all devices under USB Controllers.
Uninstall all devices under Storage Volumes. Say no to any reboot prompts until you are finished. Also, if a Storage Volume doesn't uninstall, ignore it and move to the next one.
If you have a yellow ? with unknown devices, uninstall all of the entries there as well.

When done, reboot

Reconnect the USB devices and see if they're recognized properly.

Running XP with SP2, check to verify that you have these USB 2.0 drivers from the Device Manager:

Date Version File name
29-Aug-2002 5.1.2600.1106 or later versions Usbport.sys
29-Aug-2002 5.1.2600.1106 or later versions Usbhub.sys
29-Aug-2002 5.1.2600.1106 or later versions Hccoin.dll
29-Aug-2002 5.1.2600.1106 or later versions Usbehci.sys

More info here:
http://www.microsoft.com/whdc/system/bus/usb/default.mspx
http://www.microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

gl :)
 
You must log in or register to reply here.
Back
Top