superpi help.

[Bbq]

Running the 1:1, on an ASRock 939dual, 2x256 ballistix. 240x10. I would go higher, but ram won't pass memtest above 253. Please help with lowering these.

For some reason, A64 Tweaker isn't showing properly, might be because I'm running Windows Server 2003 x64.

 

[(cf)Eclipse]

with a64tweaker, normally if it bugs out, closing it, opening cpu-z and then opening a64tweaker fixes the problems.

if you want a better time.. well, you gotta get that cpu clock up!
and set command rate to 1T at the very least.

 

[Bbq]

I re-opened it, and it registered correctly. Ram timings now running 2.5-4-4-8-11-256 1T. Superpi 1m is 36.422.

 

[cornelious0_0]

As Eclipse said...biggest thing you gotta do is pump up that HTT...SuperPi loves raw clock speed and tight timings...so do what you can, hopefully you're not completely out of leg room with that board, 'cus I have yet to see an Opty 146 conk out that early in the game.

 

[Bbq]

My Opty tops out at the 3.4~ range; I had it there on D.Ice. But, It's the ram right now. It just won't go above 250 or so without erroring and no boot. There aren't enough vDimm options (2.6 and "high" which is 2.7). I should set a divider. I'll report back.

 

[(cf)Eclipse]

use 3-3-3 timings. those ballistix should be able to do 300mhz easy if your board is up to it

 

[cornelious0_0]

use 3-3-3 timings. those ballistix should be able to do 300mhz easy if your board is up to it

Agreed...

Damn it'd be nice to have some Dice to play with along with the single stager that'll be mine soon enough.