• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

suck or blow

W

woppy1

Weaksauce
Joined
May 1, 2007
Messages
69
is it better to suck or blow through a rad at the min i have 2 fans blowing through but have two more which i can put on
 
The general consensus is that pulling is marginally better than pushing, and push/pull is marginally better than pulling. By marginally, I mean that you won't see any temperature differences, so it really doesn't matter. I'd recommend either push or pull as is convenient, but not both due to added noise.
 
Push/pull is the most effective, but also the loudest. In terms of single-fans, pulling is slightly more effective but can be significantly quieter.
 
I have 6 fans on my rad, 3 on bottom pushing, 3 on top pulling and each side is hooked up to a fan controller, allowing me to turn off the top or bottom or tweak the volts for noise.

Turning off the top or bottom makes no difference temperature wise, as long as air is going through it. I found no difference pushing or pulling.

Having both on make a difference of about 2-3c for me, but that's them at max speed.

So what I'm trying to say, is that it really doesn't make much difference as long as you have fans getting air through the rad in the same direction(you want a flow, of air, obviously). So push or pull, whatever is the easiest to mount.
 
You must log in or register to reply here.
Back
Top