This is probably asking a lot, but does anyone know if the adapter supplied by Intel (in retail SSD package) or SilverStones 3.5" adapter will correctly align the SATA and power connecters so that the SSD can be used with a backplane in a SuperMicro removable tray? My case is a CSE-733T and my mix would be two 3.5" WD1001FALS and the SSD as boot/op drive. Using the tray/adpater would be ideal for now.
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
SSD 3.5" adapter question
- Thread starter Auraka
- Start date
The Silverstone adapter will not align the SATA connector to the same place as a 3.5" HDD. I do not think the Intel one will, either. It would involve mounting the SSD off-center...in fact, I think almost all the way to the side of the adapter.
Get you an Icy Dock MB882SP-1S-2B Converter http://www.newegg.com/Product/Product.aspx?Item=N82E16817994083 . I am using one in my Corsair 800D Front bays and it works great. Makes the SSD the same dimensions and connections as a regular HDD and also protects your SSD.
- Joined
- Jul 17, 2006
- Messages
- 21,828
Are there no mounting holes on the bottom of the caddy for 2.5"? If not, you can ask SuperMicro if they have an adapter. If not, then you can always take a drill to the caddy. 
Agree about the plastic part, but it does work fairly well and is about the best solution I have found so far. The 1B version does have metal on the inside and might be better.