Something happened Mobo temp increased

Joined
Jun 25, 2001
Messages
677
I have an asus K8V and i guess my cable got jiggled because my RAID1 array had to rebuild. I rebooted not realizing what was happening, and saw it was just the raid array slowing down the disk acess and wasnt worried.

Then i saw the ASUSprobe temp monitor starting beeping at me, and the motherboard temperature sensor was redflagged. My Athlon64 3200+ runs <45C but the motherboard sensor is showing 38-40C now, which is very high. I do not know why this would happen, it would never get this high in the past. I dont remember exactly but it was most likely always below 35C, and the warning was set to trigger at 38C.

I really have no idea what to make of this, i didnt change any hardware and the only software thing i was doing today was playing some games, and messing around with dvd codecs and filters... also installing WinDVD5.

Any ideas?

Asus K8V
A643200+
2x512corsair 400mhz twinx
Radeon9500pro
Hercules GTXP
ATI tv tuner
PCI card : domex scsi adapter that only works with scanners.
 
sickpuppy said:
I have an asus K8V and i guess my cable got jiggled because my RAID1 array had to rebuild. I rebooted not realizing what was happening, and saw it was just the raid array slowing down the disk acess and wasnt worried.

Then i saw the ASUSprobe temp monitor starting beeping at me, and the motherboard temperature sensor was redflagged. My Athlon64 3200+ runs <45C but the motherboard sensor is showing 38-40C now, which is very high. I do not know why this would happen, it would never get this high in the past. I dont remember exactly but it was most likely always below 35C, and the warning was set to trigger at 38C.

I really have no idea what to make of this, i didnt change any hardware and the only software thing i was doing today was playing some games, and messing around with dvd codecs and filters... also installing WinDVD5.

Any ideas?

Asus K8V
A643200+
2x512corsair 400mhz twinx
Radeon9500pro
Hercules GTXP
ATI tv tuner
PCI card : domex scsi adapter that only works with scanners.

How clean is your wiring? Did you move your PC? If you did, possibly wires might be covering some fans?
 
Mostly rounded cables. 2 ribbons folded neatly.
Also have 2x120mm intake side fans with a clear shot at the mobo HS and the processor HSF.

Airflow shouldnt be a problem.
 
Maybe there was a change in your ambient temperature? Did you adjust the heating in your room?

Did a fan fail?
Are the fan speeds the same as before?
 
Back
Top