• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

SN85G4 Will not boot?

M

mgreenleafsr

n00b
Joined
Mar 19, 2005
Messages
2
:confused: Just tried to boot my XPC and nothing.
It gets as far as Detecting Array.. and stalls forever.
I have a raid 0 with 2 80GB Seagates.
It was working OK.
I reset the Bios, did a setup to boot from nVidia Agent, and still nothing.

Any help would be appreciated.
TX
Marc
 
does it give any errors?

Did you change anything? Did you update bios?

 
No errors, it just tries to boot and gets as far as the Detecting Array... sscreen, but nothing else.
I reset the bios, but I cannot remember how to set up the bios for RAID 0 using 2 Serial ATA drives, and boot from them.
I have 2 80GB Hdds at Raid 0.
I am confused about seting the IDE and , boot drive and integrated peripherals?
 
If you go into bios thehre should be raid settings and you should be able to turn sata raid on... then while booting it will show you searching for raid and will let you hit ctrl + F4 to setup (i think) I not to sure I not close to my sn85 to reboot and check

 
You must log in or register to reply here.
Back
Top