• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

SLK948U, Socket 939 Compatible?

M

|MaguS|

[H]ard|Gawd
Joined
Jun 6, 2004
Messages
1,934
I was wondering if the Thermalright SLK948U was 939 compatible? The website only states AM64/FX, not the socket it can be used on.

I got a 939 FX 53 on the way and wanted to know if I should get this cooler or not.
 
Which fan do you have on it? Was thinking about getting a Tornado and a Nexus Controller card but head that the Nexus has a buzzing sound at low speeds...

Hows the XP-90 perform against it?
 
I have a 948 too and use a panaflo 92mm high speed - 57cfm @ ~35db. Unless you really, really need tornado cooling the panaflo is the next best as far as noise/performance IMHO.
 
i have a 92mm tornado on mine with that hooked up to my nexus fan speed controller. with the fan on high i get about 39c temps idle, with it on low i get 41c. Load with the fan on high is about 50c. i dont run low on load because that usually equals a BSOD
 
PureBooYah said:
i have a 92mm tornado on mine with that hooked up to my nexus fan speed controller. with the fan on high i get about 39c temps idle, with it on low i get 41c. Load with the fan on high is about 50c. i dont run low on load because that usually equals a BSOD
Click to expand...

I get 39c idle, 48c load with my setup, im a bit surprised the tornado doesnt do better on full.
 
You must log in or register to reply here.
Back
Top